Re: Lks Dcvn - 1972 2WD Blazer Build
Thanks all - lots of work to do on this one.
Not sure if I will ever use a rear seat on this truck. I may add nylon bolt inserts to the holes to keep the threads intact, clean up bed and just enjoy it for the short term. Plans are as follows: Locate clean 67/68 front clip, doors, tailgate - pending Clean up chassis - removing rust scale, undercoating Rebuild suspension - not sure if staying stock height or not yet - swaying toward 2.5/4 drop at this time Install 5 lug rallys with 275/60 tires - have wheels, need tires Locate LS motor/updated trans (still need an automatic crossmember) Get it running/stopping by the end of the year (I hope) I'd like to get it safe before I get it pretty. I did take a few pix of the ebrake stuff in this thread. |
Re: Lks Dcvn - 1972 2WD Blazer Build
Thanks, OOPS and Duh Huh on my part, Wish I could absorb what I read.
|
Re: Lks Dcvn - 1972 2WD Blazer Build
5 Attachment(s)
The tear down began this weekend...
|
Re: Lks Dcvn - 1972 2WD Blazer Build
5 Attachment(s)
More pictures of the disassembly - appears to be the original upper ball joints (rivets intact) on the front suspension buried under a lot of grime.
Curious to know what the actual mileage is on this blazer if those are still the originals. |
Re: Lks Dcvn - 1972 2WD Blazer Build
4 Attachment(s)
The spare tub from Montana made it to Ohio this week and along with it came a clean 67 driver side fender and a set of clean doors.
Tub bracing is pending at the moment. I am looking for a rolling chassis so I can drop this down on it, make sure it is straight, brace the openings, replace the A-pillar and the rockers and get it ready for a body swap. |
Re: Lks Dcvn - 1972 2WD Blazer Build
5 Attachment(s)
I went to the Goodguys show in Columbus over the weekend and spotted some really nice trucks.
Note the door/rocker blend on the blue truck. It was very well done. |
Re: Lks Dcvn - 1972 2WD Blazer Build
4 Attachment(s)
A few more of the blue one with very subtle body mods all over it and another truck that was a few feet away. Anybody know which headlights these are?
Very clean. |
Re: Lks Dcvn - 1972 2WD Blazer Build
5 Attachment(s)
Removed the heater items from the firewall and found a nest and some hidden rust.
Cleaned that up and started to hang the 67/68 front clip pieces. |
Re: Lks Dcvn - 1972 2WD Blazer Build
1 Attachment(s)
Started to mock up my 67/68 front clip and added new core support mounts.
I now have a 67 driver fender, 67 core support, 67 grill. I just bought the headlight buckets on the forum. I picked up a set of inner fenders for ~$100 shipped from this post. Still looking for a 67 passenger fender and a 67/68 hood to complete the front end stuff. |
Re: Lks Dcvn - 1972 2WD Blazer Build
Looking forward to following the progress!
|
Re: Lks Dcvn - 1972 2WD Blazer Build
5 Attachment(s)
Not too much progress - acquiring parts along the way.
Spent some time mocking up the front clip though - so there was some work done this weekend. I also started taking a closer look at the spare tub I bought from MT. |
Re: Lks Dcvn - 1972 2WD Blazer Build
Glad to see this rig getting some attention... Seeing it finished driving down the road in my city priceless !
Hope we can catch up sometime 😉 |
Re: Lks Dcvn - 1972 2WD Blazer Build
Ill watch this one!
|
Re: Lks Dcvn - 1972 2WD Blazer Build
Looking good
|
Re: Lks Dcvn - 1972 2WD Blazer Build
That blue one was sick! The door handles and front turn signals looked good!! Bumper looks good sucked in too
|
Re: Lks Dcvn - 1972 2WD Blazer Build
I would like to know the brand of the head lights also
|
Re: Lks Dcvn - 1972 2WD Blazer Build
Spent some time removing the stock fuel tank, body wiring harness, extra wiring on the firewall and some other stuff from the interior on Sunday.
Still picking up parts...
|
Re: Lks Dcvn - 1972 2WD Blazer Build
Nice work. I'm always checking back for new progress.
|
Re: Lks Dcvn - 1972 2WD Blazer Build
Were you planing on going to the Super Chevy Show?
I'm going Saturday give me a shout we could meet up Your PM box is full I tried leaving you my number .... Ray....ttyl |
Re: Lks Dcvn - 1972 2WD Blazer Build
Looks like a heck of a start! I wish I could get my hands on a tub like the blue one for my next project. That thing is solid. Looking forward to seeing this one come together.
|
Re: Lks Dcvn - 1972 2WD Blazer Build
Subscribed to this one....can't wait !
|
Re: Lks Dcvn - 1972 2WD Blazer Build
5 Attachment(s)
Still cleaning this thing up a bit..spent some time prepping for the power washer.
|
Re: Lks Dcvn - 1972 2WD Blazer Build
5 Attachment(s)
Picked up some new stripping materials to see how well they did on surface rust with minor pitting. They are 80 grit nylon impregnated with abrasives. I had a coupon for $5 off my next purchase at the local hardware store and took a gamble on these. They did better than I expected.
Here is a few pictures before I started on the surface rust after it was power washed. What I neglected to get pictures of was the after on the front suspension or where I painted it with www.nomorerust.com silver paint to coat the framerails to stop rust. |
Re: Lks Dcvn - 1972 2WD Blazer Build
2 Attachment(s)
Treated the core support with the no more rust paint, gave it a shot of paint and then added the headlight bezels to it.
You can see the cleaned up frame and suspension in the shots below. |
Re: Lks Dcvn - 1972 2WD Blazer Build
1 Attachment(s)
Picked up more parts...
Need to get the time to start working on this thing... Upcoming items that are on my list to pick up:
|
All times are GMT -4. The time now is 11:38 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com