Re: cutting up a 72 k5
3 Attachment(s)
skid plate from other post, second filler and vent with quarter pics for keith, and a high hump
|
Re: cutting up a 72 k5
Also interested in hickey tire carrier. I want to put one on the back of my k20. Trevor
Posted via Mobile Device |
Re: cutting up a 72 k5
2 Attachment(s)
I will take the first fill tube ($50) you listed,... and the ECE panhard brackets ($10).
Let me know a total with shipping. Thanks. |
Re: cutting up a 72 k5
How's the grill?
Posted via Mobile Device |
Re: cutting up a 72 k5
The 69 grill
Posted via Mobile Device |
Re: cutting up a 72 k5
Quote:
|
Re: cutting up a 72 k5
Does it have decent front seat belts?
|
Re: cutting up a 72 k5
It looks like it may have the carpet hold down strips what condition are they in? Thanks
|
Re: cutting up a 72 k5
seatbelts are gone and hold downs are rough.
|
Re: cutting up a 72 k5
5 Attachment(s)
here is second fill pipe and vent. this one will come with an 8"x8" section of quarter to weld in a truck box side to put tank under bed. $120+ride obo. no back seat. floor brackets look ok, can cut sections of floor out as needed. and an extra chunk of rear quarter minus tire brackets. $25+ ride
|
Re: cutting up a 72 k5
Rough as in rusty or all bent up any pictures?
|
Re: cutting up a 72 k5
4 Attachment(s)
windshield frame looks good. will cut wherever. $150+shipping. ac dash uncut $70+ride. bucket seat brackets as pictured $125 or $550 with seats.
|
Re: cutting up a 72 k5
Quote:
|
Re: cutting up a 72 k5
will try to box up stuff tomorrow after work and get shipping info.
|
Re: cutting up a 72 k5
how is the vertical section of sheetmetal behind the seats?
|
Re: cutting up a 72 k5
good, can take picture tomorrow
|
Re: cutting up a 72 k5
Sounds good thanks
|
Re: cutting up a 72 k5
Quote:
|
Re: cutting up a 72 k5
How much for the single wall lighting harness(es) - fuse panel to plug and plug to light fixtures? Thanks.
|
Re: cutting up a 72 k5
Quote:
|
Re: cutting up a 72 k5
Quote:
|
Re: cutting up a 72 k5
Quote:
Let me know how to pay you,... |
Re: cutting up a 72 k5
How is the top?
Posted via Mobile Device |
Re: cutting up a 72 k5
Looking for this air shutoff and the plastic nut and centering bolt ( I broke this one) its located inside the pass side cowl. wiper motor clip that holds the wiper arms on the motor and uncut rear tail light harness, the one that goes from the lights to the 4 wire on the frame.
http://i47.photobucket.com/albums/f1...ps914faa92.jpg |
Re: cutting up a 72 k5
Pics of front fenders?Mine got taken out by a young female driver.Looking for original paint to keep my patina.I've been looking for a long time:chevy:
http://i1116.photobucket.com/albums/...g?t=1339358655 http://i1116.photobucket.com/albums/...g?t=1339358745 http://i1116.photobucket.com/albums/...g?t=1339283630 |
All times are GMT -4. The time now is 04:57 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com