The 1947 - Present Chevrolet & GMC Truck Message Board Network

Page 2 of 3

Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1960-1966 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=7)

- - ID Trailing Arm Mounts (https://67-72chevytrucks.com/vboard/showthread.php?t=620836)

64chevtruck

03-03-2015 02:14 AM

Re: Trailing Arm Mounts

Hi, Im getting ready to put a later 308 rear end in my 64 that has trailing arms, Im guessing ill need these brackets then>? Im not sure how many bolts the new rear end has in it or how big the tubes are yet though, I will get that info tomorrow.

Have a good week

Captainfab

03-04-2015 12:20 AM

Re: Trailing Arm Mounts

If the differential is a 8.5" 10 bolt or a truck 12 bolt, the axle tubes are 3" in diameter.

short62

05-17-2015 11:58 AM

Re: Trailing Arm Mounts

Hi Capt need trailing arm mounts for 10 bolt 8.5

Captainfab

05-17-2015 11:38 PM

Re: Trailing Arm Mounts

I'll send you a PM with ordering and payment info. :)

Quote:

Originally Posted by short62 (Post 7175487)

Hi Capt need trailing arm mounts for 10 bolt 8.5

Captainfab

06-07-2015 11:58 PM

Re: Trailing Arm Mounts

Bump

OldChevy61

07-01-2015 01:11 PM

Re: Trailing Arm Mounts

Captain, I need a set of the trailing arm mounts for 12 bolt truck rear end . Getting rid of the ho32.

Captainfab

07-01-2015 11:24 PM

Re: Trailing Arm Mounts

I'll send you a PM with ordering and payment info.

Quote:

Originally Posted by OldChevy61 (Post 7227652)

Captain, I need a set of the trailing arm mounts for 12 bolt truck rear end . Getting rid of the ho32.

OldChevy61

07-07-2015 07:27 AM

Re: Trailing Arm Mounts

Got the mounts yesterday. Solid pieces and great service. Thank you Sir.

DakotaKid

08-11-2015 02:51 PM

Re: Trailing Arm Mounts

is there a Diagram with Measurements for the spacing of these for 60-62?

Captainfab

08-11-2015 11:57 PM

Re: Trailing Arm Mounts

I can try and get some measurements for you tomorrow, but to get the pinion angle correct, you really need to mock this up under your truck at your desired ride height.

Quote:

Originally Posted by DakotaKid (Post 7270436)

is there a Diagram with Measurements for the spacing of these for 60-62?

DakotaKid

08-12-2015 11:08 AM

Re: Trailing Arm Mounts

Pinion Angle is easy to set, more worried about the spacing between the 2 mounts.

Captainfab

08-13-2015 01:36 AM

Re: Trailing Arm Mounts

I am not able to get precise measurements for this but what I came up with is the center to center of the U-bolt at the rear should be aprox 46-3/8" and at the front 44-1/4".

Captainfab

02-01-2016 01:13 AM

Re: Trailing Arm Mounts

Bump

Hop	02-01-2016 10:25 AM

Re: Trailing Arm Mounts

Cap, PM'D

60chevyjim

02-03-2016 11:34 PM

Re: Trailing Arm Mounts

Quote:

Originally Posted by Captainfab (Post 6577619)

These are the mounts that you need when installing a non-original differential under your trailing arm equipped truck. I make these for both the 10/12 bolt differentials and the 14 bolt differentials. They are laser cut from 3/16" steel, formed on a press brake and the end caps are MIG welded on. The price on these are $55.00 plus a flat rate shipping in the US of $12.35. As always I will combine shipping when you purchase other items from me, to save you money on shipping.

To make a purchase either post in this thread, send me a PM here on the forum or send me an email to captainfab454@hotmail dot com.

nice brackets !!

Captainfab

02-04-2016 12:16 AM

Re: Trailing Arm Mounts

Thanks :D

Quote:

Originally Posted by 60chevyjim (Post 7473244)

nice brackets !!

CHIZZLER

02-06-2016 11:06 PM

Re: Trailing Arm Mounts

Hey captain im looking at putting a 14 bolt sf 6 lug axle under my 61 crew cab. Still working everything out. The 14 bolt measures about 3.33 on the axle tube. Will the new mounts accommodate this bigger size? Thanks

Captainfab

02-07-2016 01:25 AM

Re: Trailing Arm Mounts

I don't know why the trailing arm mounts I make for the 14 bolt wouldn't work on your 14 bolt. I haven't had any complaints of them not fitting.

Quote:

Originally Posted by CHIZZLER (Post 7476526)

CHIZZLER

02-15-2016 10:04 PM

Re: Trailing Arm Mounts

Please send me a PM for the trailing arm 14 bolt mounts. I need to get a set. Thanks

Captainfab

02-16-2016 01:05 AM

Re: Trailing Arm Mounts

I'll send you a PM.

Quote:

Originally Posted by CHIZZLER (Post 7487604)

Please send me a PM for the trailing arm 14 bolt mounts. I need to get a set. Thanks

CHIZZLER

02-21-2016 11:31 AM

Re: Trailing Arm Mounts

2 Attachment(s)

Parts received. Very nice. Thanks.

Captainfab

04-06-2016 12:37 AM

Re: Trailing Arm Mounts

1 Attachment(s)

I have one set of stock length U-bolts available for $47.50 plus shipping. If there is a genuine interest in these, I will consider stocking them.

BillyT

06-15-2016 04:32 AM

Re: Trailing Arm Mounts

Hey Captain,
You sold me. I will take one set for a dana 60. Rear was out of a 69 with leaf springs. Measures identical but required much grinding!
M/O mailed today.
Thanks
Billy

Captainfab

06-15-2016 11:26 PM

Re: Trailing Arm Mounts

I will let you know when I receive your payment and ship your Dana 60 trailing arm mounts.

Quote:

Originally Posted by BillyT (Post 7625520)

Hey Captain,
You sold me. I will take one set for a dana 60. Rear was out of a 69 with leaf springs. Measures identical but required much grinding!
M/O mailed today.
Thanks
Billy

Captainfab

07-04-2016 01:10 AM

Re: Trailing Arm Mounts

The U-bolts are sold.

I now have trailing arm mounts for the Dana 44 and the ultra rare 6 lug Dana 60 with the 2-3/4" axle tubes.

All times are GMT -4. The time now is 06:55 PM.

Page 2 of 3

Show 40 post(s) from this thread on one page