The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   67-72 Chevrolet & GMC Pickups Projects and Builds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=115)
-   -   69 slammed, 22"/24" bbc shaved clean (https://67-72chevytrucks.com/vboard/showthread.php?t=512373)

lolife99 03-11-2012 07:33 AM

Re: 69 slammed, 22"/24" bbc shaved clean
 
Looks really nice assembled.

What's the story on the burb?
Is there a build thread on it?

toocrazy 03-11-2012 09:36 PM

Re: 69 slammed, 22"/24" bbc shaved clean
 
Quote:

Originally Posted by lolife99 (Post 5244508)
Looks really nice assembled.

What's the story on the burb?
Is there a build thread on it?

No Burb build thread yet..............I bought the 66 Burb from a local engine builder. This guy builds those high dollar camaro's and this suburban was his daily driver. It was a nice one owner truck and it is solid as a rock. I told him the day he wanted to sell it i would buy it. What made it special was the twin turbo fuel injected small block motor. This motor was built first class.....you can't imagine what a blast it was to drive this rocket ship. I put some Ride Tech tubular control arms in the front with bags and Porterbuilt's drop trailing arms and C-notch in the back and installed disc brakes on all 4 corners. I had more plans for the truck and had a transmission issue. A local shop had the truck for 3 months and I lost my drive on it. I picked up the truck (transmission not done yet), brought it home and took the motor out of it and there it sits in my garage. I was planning on dropping a nice small block in it and selling it.
Sorry for the long story but I am really at a stumbling block.

toocrazy 03-11-2012 09:39 PM

Re: 69 slammed, 22"/24" bbc shaved clean
 
Quote:

Originally Posted by N2TRUX (Post 5244374)
The truck looks killer. As far as the fender liners, they look a bit bulky. If you could make them a bit smaller and flow the transition to the firewall it would help. I feel painted would allow them to blend in while polished will draw attention to them.

AGREE with you thanks. I was looking over it today and had some reservations. My other concern was having a nice detailed suspension and not being able to see it. We'll try making them smaller in the coming weeks and see what they look like. thanks again

northern 85 03-11-2012 09:46 PM

Re: 69 slammed, 22"/24" bbc shaved clean
 
Wow!! 2 Bada$$ trucks, great job on the one your building. :chevy:

big_al_71 03-11-2012 10:01 PM

Re: 69 slammed, 22"/24" bbc shaved clean
 
eveything looks awesome clean and simple.......

toocrazy 03-11-2012 10:16 PM

Re: 69 slammed, 22"/24" bbc shaved clean
 
Here is a better picture of the suburban.

http://i987.photobucket.com/albums/a...Cars/large.jpg

67cheby 03-12-2012 04:32 PM

Re: 69 slammed, 22"/24" bbc shaved clean
 
WOW...sorry i took so long to find this one KILLER TRUCK

toocrazy 03-12-2012 07:34 PM

Re: 69 slammed, 22"/24" bbc shaved clean
 
Quote:

Originally Posted by 67cheby (Post 5247468)
WOW...sorry i took so long to find this one KILLER TRUCK

Why thank you, nice compliment. YOU are the man:metal: on this forum and I appreciate your checking me out. Please make sure I don't screw this build up.

67cheby 03-12-2012 10:08 PM

Re: 69 slammed, 22"/24" bbc shaved clean
 
How would I know if you are screwing up ? For everything I do I have 14 screw ups first !! Lol
Posted via Mobile Device

67cheby 03-15-2012 02:23 PM

Re: 69 slammed, 22"/24" bbc shaved clean
 
2 Attachment(s)
i know we have talked but i didnt know if you had seen these pictures, this would solve your problem with having something smooth that would compliment your firewall and keep all of the water and debri out of your engine compartment while still showcasing the nice suspension....SLOSH TUBZ just sayin

OC 72 03-15-2012 02:34 PM

Re: 69 slammed, 22"/24" bbc shaved clean
 
Truck is going to be bad$$. With a BBC too!

LakeAnna 03-15-2012 08:53 PM

Re: 69 slammed, 22"/24" bbc shaved clean
 
Really Clean Looking!! Awesome.:metal:

toocrazy 03-15-2012 09:45 PM

Re: 69 slammed, 22"/24" bbc shaved clean
 
thanks guys, we are really locking forward to this build, we have taken 3 days off because body man is sick.......the cold is going around everywhere.....even in Florida. will keep you posted

Dinos63 03-15-2012 11:15 PM

Re: 69 slammed, 22"/24" bbc shaved clean
 
nice work and killer skills!!and the sub is sweet

toocrazy 03-17-2012 08:53 PM

Re: 69 slammed, 22"/24" bbc shaved clean
 
Today was another great work day in the garage. I have been checking out Kore 3 for my brakes. I really want 14 inch brakes because of the big wheels on the truck. I looked at Wilwood but the $4000 they need for 14 inch front and rear is a lot of money for a truck. I like the ZO6 setup Kore 3 offers......I made the mistake of ordering my wheels way too early in the build. The 5 x 5 bolt pattern was a real limitation.....cool thing is Kore 3 will drill the rotors to fit my wheels. I was working with very close tolerances because of those rear 24 inch wheels because once the truck lays down the tires are really close to the bedside at the top even after cutting out the inner bed liner. You ever notice wheels come down to 1/4 inch tolerance. I swear every time I put wheels on something I am trying to squeeze as much in as possible. I decided this morning to pull the bed off the truck to do some additional trimming in the wheel wells. We have trailer fenders in the back and they still had a lip on the inside edge so I wanted to cut it off. I was going to lift it off with a few guys but I thought why not try the forklift. We extended the forks with some 2 x 6's, got some straps and raised the bed off the frame. I could actually stand up with the wheel wheels above me and grind the edge off. That is some serious redneck fun. Oh ya, and if you see on the right I decided to buy my own welder instead of borrow one as I always have. I got it at Lowes and its the 230 volt Lincoln unit. For what we are doing I think it will be more than we need.



http://i987.photobucket.com/albums/a...p/DSC_0190.jpg

Next on the agenda was getting the hood hinges welded on. Since we had our new welder we had to weld something:devil: We removed the front tires and leveled the truck on jack stands, lined up the fenders and set the hood on. We already had the hinges mounted on the firewall.......with the tires off we had room to get up under the hood and mark where the brackets were suppose to go and removed the hood and welded the brackets on. Those bolts will disappear once we get everything welded in. The only problem with these hinges is you see them through the vented cowl on the truck. We decided we will close in the vents on each end of the cowl above the hinges so you can't see them. We are going to have to figure out where to put the gas shocks for the hood but at least we have a hinge on the hood.
http://i987.photobucket.com/albums/a...p/DSC_0188.jpg

I curious how you guys mount your air ride equipment. I am really wanting to mount the pump, valves, and electronics on the frame of the truck. Maybe someplace high where we can have a mounting platform so I can conceal the wiring and stuff. I thought it would be better to have all this mounted on the frame so I could install all of it with the bed off. Any advice would be appreciated.

Tomorrow we work on front fenders. I really like the SLOSH TUBZ but I had two more of the metal fenders that match the back. We'll be cutting them into the fenders tomorrow. I did have the idea of the panels on either side of the motor but I decided I did not want to hide the brakes and the tubular control arms.

jmedero 03-17-2012 10:42 PM

Re: 69 slammed, 22"/24" bbc shaved clean
 
Looks good man.
Posted via Mobile Device

67cheby 03-17-2012 11:09 PM

Re: 69 slammed, 22"/24" bbc shaved clean
 
Looks great
Posted via Mobile Device

Pop's C-10 03-18-2012 12:08 AM

Re: 69 slammed, 22"/24" bbc shaved clean
 
nice burb

shawno72 03-18-2012 12:31 AM

Re: 69 slammed, 22"/24" bbc shaved clean
 
Keep it up.
Posted via Mobile Device

72BlckButy 03-18-2012 06:12 PM

Re: 69 slammed, 22"/24" bbc shaved clean
 
Amazing...

toocrazy 03-23-2012 10:06 PM

Re: 69 slammed, 22"/24" bbc shaved clean
 
This past week focused on a variety of mods to the truck. When there is so much to do we bounced around a little bit but we were able to get some momentum going in a few directions.

My buddy Bob who is very well talented in hot rod building starting fitting all of the body panels. While mixing original and aftermarket body parts he has spent a lot of time getting everything to fit. It became obvious that is was time for me to move forward on building a work-build room in my garage because the dust started flying. I can dedicate a 20 x20 area in the garage to enclose. I thought I might install a in wall high velocity fan to evacuate the dust while working. If anyone has any hints on this I am all ears.

We had been playing around with some metal fenders for the front tires. I picked up some sheet metal this morning and we started cutting out some panels to finish out the inside of the fenders around the fenders. I think it is going to look pretty good.

http://i987.photobucket.com/albums/a...p/DSC_0245.jpg
http://i987.photobucket.com/albums/a...p/DSC_0247.jpg

A new Vintage Air unit arrived this week and like any new boxes of parts that arrive they must be opened and checked out. We couldn't resist sticking the unit up under the dash..........first fitting was a disappointment as there is no room under that dang dash...........even with everything removed. The last thing I want to see is an A/C unit hanging down below the dash. Next thing you know the grinder is out and we are cutting out an area at the bottom of the cowl. It was cut close to the hood hinges so we could eliminate the outside set of vents to also hide the hood hinges. This allow the unit to tuck far up under the dash so it cannot be seen from the cab.
http://i987.photobucket.com/albums/a...p/DSC_0244.jpg
http://i987.photobucket.com/albums/a...p/DSC_0243.jpg

67cheby 03-23-2012 10:23 PM

Re: 69 slammed, 22"/24" bbc shaved clean
 
I am at this exact same point right now trying to figure out how to tuck mine up in there !
Posted via Mobile Device

jmedero 03-23-2012 10:57 PM

Re: 69 slammed, 22"/24" bbc shaved clean
 
Super clean. Keep it up man.
Posted via Mobile Device

VA72C10 03-23-2012 11:29 PM

Re: 69 slammed, 22"/24" bbc shaved clean
 
Love the build! Coming along nicely with a really clean look! And the burb is sweet too!

69CST-V 03-23-2012 11:56 PM

Re: 69 slammed, 22"/24" bbc shaved clean
 
Looking forward to more progress pictures. Great start. Nice rides, toys and surroundings you have there.


All times are GMT -4. The time now is 12:30 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com