Re: Project 67 C-10
 

Put the tranny cross member in today i guess my hours are more like Total: 60 now.

Re: Project 67 C-10
 

Well got my paint samples in from House of Kolor, now just have to figure out what to do. :lol:.... Still waiting on trying to get garage space to work on it so i guess i got time.
BC01-Solar Gold Metallic
BC02-Orion Silver Metallic
BC03-Galaxy Grey Metallic
BC07-Gamma Gold Metallic
PBC30-Sunrise Pearl
PBC47-Goldmine Pearl
KBC12-Pagan Gold

Re: Project 67 C-10
 

Nice work! Let's hear about some of your plans for this build! After seeing the colors I'm interested....and subscribed!

Re: Project 67 C-10
 

well i think i'm leaning with silver base coat with pagan gold over it. got my extra rotor i've been waiting on now just have to paint that up with the vht paint and bake them and i can have the frame rolling. Picking up a late 80's early 90's 1500 chevy fgor the axle and brake booster and engine brackets and sterring box. Should get that soon just damn snow keeps screwing up everything. We got 7" of ice on some of the lakes around here and we usually only get about 5 and thats only for a fw weeks at the end of february. it's damn cold.

Re: Project 67 C-10
 

Got my rotors painted and calipers touched up now i got to bake em in the oven, hopefully they dont smell.
Total Hours: 62.

**There in the oven now and well kindda stinking up the kitchen and i'm getting bi@#%ed out by my mother but don't think the smell is gonna stay in the oven, i hope. lol.

Re: Project 67 C-10
 

Picked up a load of pallets last weekend and spent the rest of the day cutting them up for firewood. Got the rotors all nice and finished and cleaned up the turbo 400 and painted t as well as the pan.

Re: Project 67 C-10
 

The paint looks great! That hammered look sets of the pan just right and the textured paint on the trans is cool, just bought a can to spray my a/c box.

Re: Project 67 C-10
 

yeah the paint came out pretty good. the tranny was supposed to be rebuilt so i just cleaned it up and hit it with some paint. I didn't want to put a new pan on it if it didn't end up being good so just gonna throw a front seal and filter in it and see what happens.

Re: Project 67 C-10
 

Motor and tranny in now wahoo. mount. Only issue is not sure if i'm suppose to run a spacer uner the ranny to tranny mount. Ther was a piece about 3/8 tick that was there with the stock rubber mount but not sure with the poly Painted some stuff. Need to change the intake today and work on how to fit the fuel cell.
Total Hours: 70 hours.

Re: Project 67 C-10
 

Nicely coming along, lets see some pics of the colors and the tahoe. Glad too see that you are still making progress. Later

Re: Project 67 C-10
 

Put the drop spindles back on today and picked up the 88 parts truck for my rear end $50 haha. These are two colors on cars i saw at the dragway i saw that i really liked too.

Re: Project 67 C-10
 

Here a few pics of the Yukon and the kart. Truck at the beach in the snow and blown engine when i got it.

Re: Project 67 C-10
 

i wish i was at that beach right now!
haha
Great looking project.
looks like shes coming along. I like how your adding up the hours, i wish i hould have done that.
do you have much body work ahead of you?

Re: Project 67 C-10
 

luckily i dont have alot of body work to do. mainly small issues at the seams

Re: Project 67 C-10
 

not much more accomplished. actually in calculus 3 right now. lol. this is gonna put a dent in progress missing work for school this semester.

Re: Project 67 C-10
 

Packed the bearings tonight and hung the rotors and calipers. As a side note for myself, what is the tourque spec for the spindle nut?
Total Hours: 76.:ele:

Re: Project 67 C-10
 

retourqued the rotors. all the shocks are bolted in, spacer is in under the tranny so motor is sitting at 3.5 degrees, spent some time gasket matching the intake too. Also did a little fiberglass repair on the ac duct box. get the tourque wrench this weekend and the motor will be buttoned up, just have to find a 750 holley at the swap meet in april and should run minus distributor.
total hours: 84 hours

Re: Project 67 C-10
 

and this is what i'm working on tonight and working on and on. :thud::(

Re: Project 67 C-10
 

Ummmm, think I would stick with building trucks.....:uhmk:

Re: Project 67 C-10
 

truck still getting worked on but just saturdays for now. i just got to get through these last 2 classes and have my associates and done for now. hopefully this weekend i'm pulling the rearend out and swapping them over. maybe even get the cab on.

Re: Project 67 C-10
 

Intake is bolted on and finished fixing and painting the ac boxes. Tranny linkage is all on and put the gas tank under the bed for measurements. Not sure how this is gonna be with ground clearance. right now with just the motor no cab or bed i got 8" to the back of the sump area. We'll see. Oh and the new Wurth calendar came in alrighty.

Re: Project 67 C-10
 

more pics, gota figure out what i'm gonna run for headers.

Re: Project 67 C-10
 

Wurth calenders rock!!!! Check out my build thread on page 16 for some ideas on the filler for the tank. You are really moving along on this project and it looks great!!! Keep going!!

Re: Project 67 C-10
 

Thanks Dave,
Just tore apart my column so i can rebuild it i hope.

Re: Project 67 C-10
 

UUUMMMMMMMM???????? I feel stoopid looking at that chart and equations.