The 1947 - Present Chevrolet & GMC Truck Message Board Network
Page 2 of 21 1 2 3456712 Last »
Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   NJ Windsield Wiper Delay (https://67-72chevytrucks.com/vboard/showthread.php?t=593984)

twouvakind 09-22-2013 10:39 AM
Re: Windsield Wiper Delay
 
Don't get left out, wouldashouldacoulda is a tough thing to mutter in that next drizzle event.

twouvakind 09-23-2013 09:31 PM
Re: Windsield Wiper Delay
 
To top

elf w/capital T 09-25-2013 11:37 AM
Re: Windsield Wiper Delay
 
Pretty neat! Once my restore gets to that point i shall contact you!

elf w/capital T 09-25-2013 11:38 AM
Re: Windsield Wiper Delay
 
Have you received any customers install pics? Ie where they put the p-meter, and or what knob they used?

twouvakind 09-25-2013 12:59 PM
Re: Windsield Wiper Delay
 
Quote:
Originally Posted by elf w/capital T (Post 6285201)
Have you received any customers install pics? Ie where they put the p-meter, and or what knob they used?
No, no install pics. Only this:

This thing is great, an 80s-90s Ford van wiper knob fit perfect, used a factory hole under the regular wiper switch. thanks.

This came from a member in the 60-66 forum. I also had another member in 67-72 forum tapping(M7X0.75)a hole near his speed warning knob to install an alternative pot I offer.

elf w/capital T 09-26-2013 03:55 AM
Re: Windsield Wiper Delay
 
Righhttt onn man!!

Thanks!!


I shall contact you soon, im wanting to get a nex-gen when the time comes!!

jaros44sr 09-26-2013 11:20 AM
Re: Windsield Wiper Delay
 
Quote:
Originally Posted by twouvakind (Post 6285288)
No, no install pics. Only this:

This thing is great, an 80s-90s Ford van wiper knob fit perfect, used a factory hole under the regular wiper switch. thanks.

This came from a member in the 60-66 forum. I also had another member in 67-72 forum tapping(M7X0.75)a hole near his speed warning knob to install an alternative pot I offer.
Actually, i am making a speed warning mounting nut, with the m7x.75 threads to accept the locking nut on the pot. Bought the 1/2" aluminum hexagon stock from mcmaster carr, and found the tap on line. Drilled the knob to accept the pot shaft....

Plans are to mount the pot near the ws wiper switch, but on the same planes as the speed warning control cable

Thanks for the help Bill on getting the thread size

TTT

twouvakind 09-26-2013 08:51 PM
Re: Windsield Wiper Delay
 
Awesome Jim, thanks for the clarification. I would like to see a pic of the finished install, if you don't mind! NP on the thread measurement, the folks that sell the modules were more than happy to accommodate.

Quote:
Originally Posted by jaros44sr (Post 6286714)
Actually, i am making a speed warning mounting nut, with the m7x.75 threads to accept the locking nut on the pot. Bought the 1/2" aluminum hexagon stock from mcmaster carr, and found the tap on line. Drilled the knob to accept the pot shaft....

Plans are to mount the pot near the ws wiper switch, but on the same planes as the speed warning control cable

Thanks for the help Bill on getting the thread size

TTT

jaros44sr 09-26-2013 08:58 PM
Re: Windsield Wiper Delay
 
Quote:
Originally Posted by twouvakind (Post 6287487)
Awesome Jim, thanks for the clarification. I would like to see a pic of the finished install, if you don't mind! NP on the thread measurement, the folks that sell the modules were more than happy to accommodate.
No problem....give me a couple weeks

twouvakind 09-27-2013 12:00 PM
Re: Windsield Wiper Delay
 
To top

twouvakind 09-29-2013 08:56 AM
Re: Windsield Wiper Delay
 
To top

twouvakind 09-30-2013 04:34 PM
Re: Windsield Wiper Delay
 
To top

twouvakind 10-01-2013 07:58 PM
Re: Windsield Wiper Delay
 
To top

twouvakind 10-04-2013 06:17 PM
Re: Windsield Wiper Delay
 
FYI: Please feel free to compare my $52 offering to LMC's $100+shipping offering. Get the strippers and cutters ready to install the latter.

72 K20 10-06-2013 10:09 PM
Re: Windsield Wiper Delay
 
What types of payment do you accept ? Paypal ?
Thank you ! Tom

twouvakind 10-06-2013 10:48 PM
Re: Windsield Wiper Delay
 
Quote:
Originally Posted by 72 K20 (Post 6302774)
What types of payment do you accept ? Paypal ?
Thank you ! Tom
I'll take anything you got, PM coming and than you!

twouvakind 10-08-2013 06:28 AM
Re: Windsield Wiper Delay
 
To top

twouvakind 10-09-2013 04:07 PM
Re: Windsield Wiper Delay
 
To top

twouvakind 10-13-2013 10:53 AM
Re: Windsield Wiper Delay
 
Still making them still shipping quickly still $52, ready to install delivered to your door.

elf w/capital T 10-14-2013 05:11 PM
Re: Windsield Wiper Delay
 
PM sent

twouvakind 10-14-2013 07:38 PM
Re: Windsield Wiper Delay
 
Quote:
Originally Posted by elf w/capital T (Post 6314846)
PM sent
PM returned and questions answered as well as payment information. Many thanks!

twouvakind 10-15-2013 10:54 PM
Re: Windsield Wiper Delay
 
To top

twouvakind 10-16-2013 10:13 PM
Re: Windsield Wiper Delay
 
To top

elf w/capital T 10-17-2013 06:55 AM
Re: Windsield Wiper Delay
 
Pm sent, sorry for the delay!!

twouvakind 10-18-2013 08:26 PM
Re: Windsield Wiper Delay
 
Building, selling, shipping. Get yours today!


All times are GMT -4. The time now is 09:31 AM.
Page 2 of 21 1 2 3456712 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com