What type of headers do you have on that motor?
|
1 Attachment(s)
cross member is one I made for 700r4 trans headers are sanderson C-10 . The haeders on motor pics were hugger headers that were just going to make more bends than I wanted so I swapped for the sandersons imo great quality headers they are also ceramic coated. still need to clean up mufflers to match tubing and get rid of weld spots. and make them look more presentable. as for 4 link pics here you go and no i dont mind when some else post pics other than me its kind of cool that you guys keep track of it and all of the comments are much appreciated we just do what we can. we just do it on the side to have fun and do work for friend and aquaintences. we have 2,41 willys were waiting for parts for to continue here are pics of it 2nd willys the same only will be stuffing 392 blown hemi.
|
1 Attachment(s)
4 bar
|
1 Attachment(s)
4 link
|
front brackets are same elevation as bottom of frame stainless bars as is panard bar that we put a break in bar to keep rear from kicking over from full up to full down rear shifts 3/16th" from ride height set up rear axel mounts are welded to axle tube then we welded air ride brackets to them.
|
1 Attachment(s)
heres the willys
|
1 Attachment(s)
w
|
1 Attachment(s)
w1
|
1 Attachment(s)
w2
|
1 Attachment(s)
427 tall deck 400 trans fab 9 inch ifs rack and pinion 4 wheel disk brakes
|
Your truck is Sweeeeeeeeet!! So is that Willys! WHere abouts in central Cali are you?? Stockton here. 70short/step
|
What color is that on the Willys? Looks great.
Jay |
its just the gel coat
|
That exhaust is very impressive!!
|
Oh man I like that 4-link...Where'd you get the parts or did you fab it up yourself? was your truck a coil or leafspring truck? I'd love to do something like that in the future. Damn nice rides you got there dude.
|
both rigs are very nice. Keep up the good work.
|
4 link is for like 34 ford model t at least thats what the kit was for and we adapted for our purposes we had one that we had use for 27 we built and used as mock up prior to purchase.it was aa coil rear prior 6 lug truck got 1 legger rear from 71 and rebuilt w/ eaton posi and 3.73 gears new axles brgs seals brakes should have just spent the extra and did rear disk also but ive spent so much already. or started w/ lincoln disk 9 inch didnt have any to speak of at the time we started.
|
ha ha...gelcoat. well, hopefully I can find a match for that somewhere.
thanks, Jay |
If you were to get a flat tire in the rear of your truck, would the
4-link bracket clear the pavement or is the picture deceiving ? |
it would clear if tire went flat plus ttrucks ride height brings bracket up.
|
All times are GMT -4. The time now is 05:31 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com