Re: Randy & Jakes 64 4x4 SLOW build
 

#2 Running click pix...http://i1168.photobucket.com/albums/...ps6fe3e9fe.jpg

Re: Randy & Jakes 64 4x4 SLOW build
 

Well let's see I'm off all week and not going anywhere,So I need to get my but in gear and do some work on the ole truck....come on now people get me motivated.....

Re: Randy & Jakes 64 4x4 SLOW build
 

so..make like a firecracker and get crackin !!!

Re: Randy & Jakes 64 4x4 SLOW build
 

I did manage to work on the ole truck some but progress is slow,maybe it's me LOL.I'm using a donor door to patch some floor area.http://i1168.photobucket.com/albums/...ps5f79d677.jpgDon't worry this door gave up it's life to continue on..http://i1168.photobucket.com/albums/...psae4fbf37.jpgto be used somewhere else,it's all vintage metal...but suppose to rain all week here so until next time...

Re: Randy & Jakes 64 4x4 SLOW build
 

Making some good progress my friend! That level of rust might scare me off but it looks like you've jumped right in and attacked it without looking back! Can't wait to see how it turns out.
Posted via Mobile Device

Re: Randy & Jakes 64 4x4 SLOW build
 

Ok finally had some time to work on the ole truck,I got another grill cuz mine was tweaked a little,the top one was the one that came off of truck and the bottom is the replacement even though the top one looks better,oh well It's got patina.http://i1168.photobucket.com/albums/...psb6ea5cd5.jpgALSO needed to work on the frame horns since the frame is a 70,so I cut the ends off to add the correct ones so I can put the bumper on.the header panel is tweaked,and of course one side of the radiator support is rusted out on passenger sidehttp://i1168.photobucket.com/albums/...ps7aa6a2ed.jpgGot some patching to do on the fender wells near the front,got lucky and only rung off 2 bolts,The front end has never been apart,had to take a hammer and screw driver to chip away the undercoating,the battery box is perfect just needs to be cleaned and painted,I got more done in one afternoon than months considering all the rain and bad weather since the truck is outside..but I still got a long way to go,I'm gonna patch it up for now and prolly go ahead and get tags and put it on road to use as a back up vehicle.atleast if I get all the patching done then it will be easier to redo later...http://i1168.photobucket.com/albums/...ps01070d9d.jpghttp://i1168.photobucket.com/albums/...ps573b2afd.jpghttp://i1168.photobucket.com/albums/...ps3bb594d0.jpg

Re: Randy & Jakes 64 4x4 SLOW build
 

Woo-hoo got the driver floor-toe board all patched up and the rocker all welded up. got the door back on and now done pulled the passenger door and tearing out the rocker and the flooring, hopeing this side will go faster. someone has already replaced the lower fender section but they didn't replace the brace that the bottom of fender bolts to. got a long way to go. then I can start patching up the radiator support and the fender wells. Proly gonna need another hood as this one is pretty toast.. It'll do for now as it will be a while before I start on out side. Gotta replace door bottoms inner and outer, so I've got plenty to keep busy..

Re: Randy & Jakes 64 4x4 SLOW build
 

I'm glad your coming along, good to see things done I'm sure.

Re: Randy & Jakes 64 4x4 SLOW build
 

Here's some latest pixs.Still have a few small quarter sized holes in the driver floor are and side of toeboard, And passenger side tore out PROGRESS,PROGRESS,PROGRESS....http://i1168.photobucket.com/albums/...ps6b097921.jpghttp://i1168.photobucket.com/albums/...ps871f1a1f.jpghttp://i1168.photobucket.com/albums/...ps34281396.jpghttp://i1168.photobucket.com/albums/...psf6322727.jpghttp://i1168.photobucket.com/albums/...psaec4b44c.jpg

Re: Randy & Jakes 64 4x4 SLOW build
 

Gonna get out there today and work on the ole truck today.PROGRESS PROGRESS PROGRESS

Re: Randy & Jakes 64 4x4 SLOW build
 

Hit it hard man! Show is the pics when you're done!
Posted via Mobile Device

Re: Randy & Jakes 64 4x4 SLOW build
 

http://i1168.photobucket.com/albums/...pse419a146.jpghttp://i1168.photobucket.com/albums/...pse949dbce.jpghttp://i1168.photobucket.com/albums/...psa7ec20d8.jpgJust got to go back and grind welds and primer,very glad to get these done, still got to do rear cab corners and one of the rear floor supports.

Re: Randy & Jakes 64 4x4 SLOW build
 

Got my Rad Support patched up
http://i1168.photobucket.com/albums/...ps77e49ade.jpg
http://i1168.photobucket.com/albums/...psb428fb9d.jpg

Re: Randy & Jakes 64 4x4 SLOW build
 

http://i1168.photobucket.com/albums/...ps9be8ae85.jpg
http://i1168.photobucket.com/albums/...ps8a5c86e2.jpg
Went out today when I got off work and cut the spot welds out of the front wells wish they made a patch for this area, sure would make life easier..

Re: Randy & Jakes 64 4x4 SLOW build
 

You are a brave man, tackling all that sheet metal work!
I wish I had the body work talent to do that, and get it right.
Keep at it!

Re: Randy & Jakes 64 4x4 SLOW build
 

Thanks Jason, I don't claim to be a body man I don't mind tearing one apart as far as sheet-metal cutting and grinding and welding, It's that fine sanding primer and more primer and more sanding more primer. It's that fine tuning the body for paint. But in the end will be worth it. I've got close to paint on a lot of vehicles, then for some reason another I always have to sell and never see the end product, I vowed that I will finish this one. I'm getting too old to be starting all over again.

Re: Randy & Jakes 64 4x4 SLOW build
 

Nice build!:chevy:

Re: Randy & Jakes 64 4x4 SLOW build
 

Thanks TJ In post #31 you can see it has a later model radiator Just sittin there with no mounts or support on the bottom just sittin on frame so I cut a piece of flat stock and bolted across the frame rails and used some 1x2 square tubing with cutouts for bottom of radiator to sit in,Lined it with some split vacumn hose. So know it has support from bottom. Maybe it will last til I can get a new one the right one..Anywho that's one last thing to worry about..
http://i1168.photobucket.com/albums/...ps10dd06bb.jpg

Re: Randy & Jakes 64 4x4 SLOW build
 

http://cdn1.bigcommerce.com/server40....1280.1280.jpg
Here's the tires I would like to put on the truck. It'll have that ole look..

Re: Randy & Jakes 64 4x4 SLOW build
 

Well got the front end back on and buttoned up for now since winter is coming, I may have to put it on the road in case I need it, still got a lot to do. Just aliitle at a time.
Still have to work out the front bumper.
http://i1168.photobucket.com/albums/...ps7a44b3e1.jpg

Re: Randy & Jakes 64 4x4 SLOW build
 

Well not much work on the ole truck lately other than buying a hood my present to myself. rust free...
http://i1168.photobucket.com/albums/...ps983fa82b.jpg
http://i1168.photobucket.com/albums/...ps1d408f1b.jpg
http://i1168.photobucket.com/albums/...ps1e1ea8e2.jpg
http://i1168.photobucket.com/albums/...psfe17cbd0.jpg

Re: Randy & Jakes 64 4x4 SLOW build
 

AWWWWWWWWW MAAAAAAAAAAAN! I am JEALOUS!!!!! LOL!!!! Wish I got a hood like that!!!!! :jdp::jdp::jdp::waah:

Re: Randy & Jakes 64 4x4 SLOW build
 

got my new hood on
http://i1168.photobucket.com/albums/...psd63ec6c4.jpg
http://i1168.photobucket.com/albums/...pse131074a.jpg
http://i1168.photobucket.com/albums/...psa0d80cad.jpg
here's pics of old hood
http://i1168.photobucket.com/albums/...ps8fc5756d.jpg
http://i1168.photobucket.com/albums/...ps44164d62.jpg
http://i1168.photobucket.com/albums/...ps1b7832f1.jpg
http://i1168.photobucket.com/albums/...ps2fc42e46.jpg
http://i1168.photobucket.com/albums/...ps510c7957.jpg

Re: Randy & Jakes 64 4x4 SLOW build
 

I got to get a new park light harness. I bet there were atleast 5 splices from firewall to the lights.. Crazy man crazy.

Re: Randy & Jakes 64 4x4 SLOW build
 

Drool drool drool and drool again....hope Santa gives me a hood like that! lol!