The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- WIW (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=83)

- - 1999 Trans Am 5.7 6 speed (https://67-72chevytrucks.com/vboard/showthread.php?t=771213)

Re: 1999 Trans Am 5.7 6 speed

Quote:

Originally Posted by jjzepplin (Post 8628375)

I am going to need some help on this one guys. Oh it had a new clutch for sure and a B and M shifter. One broken exhaust manifold bolt busted flush with the manifold so some is sticking out of the head. Might be able to get it.

I like ARP bolts in this instance for replacements. If the the bolt is busted flush you might be able to start a hole with a Dremel tool and then use a reverse twist drill bit spinning clockwise in the drill and it will spin right out. That procedure worked for me. A Dremel tool is one tool I really like a lot. It was a lot easier to use a small grinding bit to center a hole for the reverse drill bit I used.

Re: 1999 Trans Am 5.7 6 speed

It is broken off flush with the manifold so about 1/4” should be visible once the manifold is removed. I usually give the bolts a good stiff bang with a punch before I try to remove them. So the rat should come out fine...haha!