Re: Best Buget Welder To Buy?
Quote:
|
Re: Best Buget Welder To Buy?
Does anyone in here use TIG?
It's a great choice for small stuff, low heat input, very accurate. |
Re: Best Buget Welder To Buy?
This is a very timley topic for me. I purchased a 72 Longhorn this summer and have had very little time to work on it thus far. I just ordered some new rockers and door pieces to replace on saturday and I bought this welder.
http://www.harborfreight.com/cpi/cta...emnumber=55525 Has anyone used this item? I've been reading some stuff on these boards the last month or so. I will get some photos up soon. I live in Milwaukee, but my truck is currently being stored at my folks' place in Central Wisconsin. |
Re: Best Buget Welder To Buy?
Quote:
|
Re: Best Buget Welder To Buy?
I priced a Hobart 140 at Northern tool @ 5 years ago then went to the local welding shop where I would be purchasing my gas to see what they had to offer. After talking to the salesman and showing him the price on the Hobart I ended up buying a Millermatic 140 that he gave me a deal on. I paid slightly more for the Miller but the salesman made up most of the difference by giving me the first tank of gas free.
IMO it is better to spend a little more on some things and buy it from the place that can get parts and repair it if there is a problem down the road. |
Re: Best Buget Welder To Buy?
Quote:
|
Re: Best Buget Welder To Buy?
Quote:
|
Re: Best Buget Welder To Buy?
So Miller, Lincoln, or Hobart?
|
Re: Best Buget Welder To Buy?
Lincoln and Miller are premium, top of the line machines. It's completely Ford versus Chevy in a MIG welder. Engine drive, Lincoln is king.
Hobart is owned by the same company as Miller, but they are consumer grade. The differences between the two are noticeable if you look closely. For instance, on the Miller MIG, the wire drive is aluminum while it's plastic on the Hobart. Also, the Hobart will have a lower duty cycle than the similar Miller machine. The consumer line of Lincoln welders is Century. Again, made my the same company, but at lesser quality and specifications. |
Re: Best Buget Welder To Buy?
Quote:
|
Re: Best Buget Welder To Buy?
On a mig welder, choose your dealer and support network that treats you best. My big steel jobber is a Miller dealer so I bought a Miller welder recently so I can get needed stuff from them.
Either is great though. I have a 15 year old Lincoln 110 volt Mig and a 15 year Miller 220 volt big Mig. Both are super. On engine drive welders, Lincoln owns the market. Find any big construction job, bridge, or pipeline and it will be all Lincoln on the job site. It's literally like 99 percent Lincoln engine drive machines. As you can likely tell, I am a big welder guy. I spend a lot of time on the welding forums and read the books too. I even have the title "welder" on my business card. Some days I do better than others, but it's my passion. |
Re: Best Buget Welder To Buy?
Quote:
Welder, Welding Wire, Gas W/ Bottle, Gloves, Helmet, and Gas regulater? Am I missing anything that I would need to start welding? |
Re: Best Buget Welder To Buy?
if it was me and you dont do very much needing a welder i,d just hire it done. you can make a mess of things if you dont know what your doing. there more to it that just buying a welder.jmo
bob |
Re: Best Buget Welder To Buy?
Quote:
For gloves, I use normal leather work gloves for most mig work. Some spots and shot beads don't make enough heat to need the big heavy welding gloves. Only if I'm running beads for long lengths do I put on the thick ones. |
Re: Best Buget Welder To Buy?
Quote:
|
Re: Best Buget Welder To Buy?
thanks ya'll you guys have been a great help
|
Re: Best Buget Welder To Buy?
Now... do yourself a favor... go to your local community junior college and take a couple of welding classes.
Oh yeah, TX firefighter is right on the machines, go Miller or Lincoln. |
Re: Best Buget Welder To Buy?
Here's a good welding site with tutorials and forums.
http://www.mig-welding.co.uk/ |
Re: Best Buget Welder To Buy?
Quote:
i like the adjustibility of the milller - it does not have the presets like other welders do. it makes it nice because i am cutting the drip rails off and i am welding on different material thickness. i have found a setting that wont blow through the material yet still penitrate the thicker areas |
Re: Best Buget Welder To Buy?
Also, invest in a auto darkening helmet. I was amazed how much prettier my welds where once I started using one. It will also save you a bunch of grinding time.
|
Re: Best Buget Welder To Buy?
Quote:
|
Re: Best Buget Welder To Buy?
Mine is also from Harbor Freight, I've had it a couple years, no complaints here,
|
Re: Best Buget Welder To Buy?
at home ive got a miller 172 its a 220 machine and is good up to 5/16 I use 0.23 wire for sheetmetal and it does great. Unless they have changed them the small lincon machines have plastic parts in the drive mechanism i havent used one for mabie 5 years so the new ones may be aluminum like the millers. Just know your machines limits my welder is good to 5/16 but even being a certified welder i wouldent weld a frame with it. i see alot of people using 110 machines to do frame work and its scarry. Keep in mind a big machine like a lincon or miller 255 can weld thin guage sheet metal so you dont need two machines.
|
Re: Best Buget Welder To Buy?
Was thinking about buying a lincoln, But does anyone know forsure if the drive componants are plastic or metal?
thanks Bryant |
Re: Best Buget Welder To Buy?
On my 15 year old Lincoln, they are not plastic.
|
All times are GMT -4. The time now is 02:59 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com