Just make sure you know all the facts before you start trying to warn us not to buy from someone. I for one do want to know when we have a bad supplier but just make sure and contct and if you do not get a reponse right away maby like Wes, he is not there to answer you e-mails at the time. Wes is very good on replys and always did great when I bought parts for my '70 Chevy and always answered any question I had and I would recommend Wes anytime. A very honest person.
|
I see the newbie has not responded as of yet.. I have always been treated right from wes I always get my parts the same week I order them gotta be careful on flamin people so quickly...
|
Welcome to the board from Kent, WA.
I saw and met many new board members yesterday at the Monroe swap meet and it was really fun. I was accused (LOL) of being an "apologist" for PICKMUP who is another stand-up vendor on this board and local competitor of WES. It is time to weigh in on the side of WES. I have bought from both and they are really great vendors that provide what they advertise. WES will not be home until this evening, I suspect. I am sure he would glady refund your money for that part. If the part is the gas filler neck hole patch piece...they are made by hand with compound curves since nobody is mass producing them yet. They take lots of skill and some sheet metal tools to produce properly...well worth the $20. Just my 0.02! |
To be honest, I would have thought that filler would have cost more. If I had to do all that work, I know I would have charged that much or more. As stilookn said "They are made by hand with compound curves and they are not mass produced". See how many venders will do that. GMC Paul will and he tries to get us more parts mass produced. These are both great venders.
|
I think trash talking a long time upstanding member of this board isnt a way to become accepted when you only have 7 posts yourself. you should try harder to contact him or post this b.s. on his web site.
|
:crazy: i wont flame anyone without validity. sounds to me like he didnt research what he was buying. :dohh: :bs:
|
I would like the link to his site. No such thing as too many sites to shop for our parts. You guys are the better than paid advertisement
|
his site is www.classicheartbeat.com, ya'll don't be so hard on the new dude :) everyone gets upset at some time and many post in anger. I am sure Wes will handle this with him as soon as he is able to.
|
1 Attachment(s)
I guess it comes down to what is your time worth. Personally I cannot go buy a piece of sheet metal and cut and shape it for thr $12.95 cost on Wes's site. What more would you expect from a filler piece? John
|
I bought two from Wes and had no problems...i knew they had to be welded in place.
|
Hmmmm, maybe he's not a very good welder and is upset with the cost of Bondo as well. :lol:
|
I saw this post and just knew there would be a public hangin of the new guy. Y'all went pretty easy on him. Members here are definately a class act.
|
I bought a filler panel (dont remember who from) and it was nothing more than a slighly bent peice of metal and i paid about $20 for it as well. Cant say i was either pleased or dissappointed with it. It is what it is and what i expected. I know i would buy one again vs taking the time to make one.
|
I just installed that gas filler part from Wes last week, nothing wrong with that part. You just have to take a body hammer to it and shape it some.
Wes is a good guy, I get nearly all my parts from him. I ordered both fleet bedsides last week, woohoo :metal: |
Well first off, I would like to thank everyone for supporting me here. I have always tried to be strait with everyone and absolutly do not missrepresent anything we sell. As many of you here know I stand behind everything that I sell even if my suppliers do not.
I have been away from my shop since Friday afternoon to attend the Monroe swap meet as a few of you have seen.. Great seeing you guys!! I do not bring a computer with me to the swap meets, nor would I have time to use it if I did.. Just too much stuff going on, too many people talking to me and by the time I make it to my motel I am ready for bed!! I am not complaining, lol but it is exhausting.. On Sunday, the last day of the meet, it rained like heck and we did pack it in early, but we found someone at the meet that had some pretty hard to find parts that he didn't bring to the swap meet. I wanted to check them out, so we did not come strait home and in fact didn't get home untill late in the evening. I did get some nice stuff though... :metal: The only communication I have received from "affalcons24" is a private message from him. No email, no phone calls, or messages. I have responded back to him. I normally do not like to publish company business on message boards, but since he has decided to air out his problem with our product with everyone here, befor hearing back from me, I guess you guys should see my responce. So here it is: Quote:
|
Quote:
|
Now that everyone knows what's up and the issue has been resolved, people might want to stop posting in this thread- everytime you do, it gets bumped back to the top of the forum and it makes Wes look like a butthole (because of the thread title and supplied image) :D
Just my 2ยข. |
You can not ask for any more than that. See, you should have waited. Do not get in a hurry to bad mouth someone. Glad you had a good time Wes.
|
Not a lot of progress on the panel lately. As a matter of fact, it went kind of backwards. The bodywork on the left side of the truck was close to being done (for the 2nd time) when a tropical depression blew through. Everything in the shop had condinsation all over it, including our Panel Project. Now it has rust in places that I couldn't get completely dry and the work needs to be redone befor we can move forward with it. I will take some pictures and update our Panel Project page soon. When this happened it just took the wind out of my sails and when you combine this with the fact that the guy that I am having work on that side of the truck hasn't showed up forever.... Well you guys know what I mean.. :whine: :whine: We will hopefully be able to move forward with it soon though.. WES
|
Thanks shifty and 68swb for standing up for me. I understand that everyone will not be happy with everything we cary, but it sure would have been nice to have been given the chance to resolve the issue befor airing it out in public.. WES
|
WES, I'm glad you saw this post. We missed you around here man!. I was wandering where you were and even posted awhile back asking ,but I didn't see any replies. Hope you hang around again!
|
I just wish affalcons24 would respond to some of these replys. Have not heard back from him. Hope we did not scare him away from this board. If you see this affalcons24, let us know what you think. Let us hear from you.
|
This has to be a first....never seen a bad post on WES....
|
I saw this post and was armed with good things to say about Wes myself. My son and I took a Saturday and drove up to Oly to meet Wes and check up on the progress of the Garden Truck when it was still in pieces. Wes is a heck of a nice guy and I couldn't see him doing anyone wrong. I am pretty sure that everything good that can be said about Wes has been said here already so I'll leave it at that.
On another note: Good to see you around here again Wes! Hope you plan to stick around. |
Quote:
|
All times are GMT -4. The time now is 03:26 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com