Re: whats the best way to polish mag wheels?
 

crawdadfox.... so this works well on the Vintec's? I noticed that Billet Specialties recommends Mothers when polishing their wheels.

Re: whats the best way to polish mag wheels?
 

If your Vintecs new i use the Mothers Billet polish, but if they are a little oxidized i use the Mothers mag followed by Mothers Billet polish.

Re: whats the best way to polish mag wheels?
 

I use the regular Mother's to get the initial buffing started, then I wipe the item down with a detail spray and a rag to remove the nasty black stuff. I follow that up with the Mother's Billet polish to finish the aluminum to a mirror finish. I also wipe that down with a detail spray and a soft rag. That is followed with a sealant to keep the metal clean.

Re: whats the best way to polish mag wheels?
 

Wher is best place to purchase the mentioned Mother products? Parts store, Wal mart or truck stop - etc. Just looking for the best price.

Re: whats the best way to polish mag wheels?
 

My best guess for the cheapest prices would be internet suppliers. I know that I see some products for sale on Ebay quite often. I have some links saved on my computer at home, I will try to get them posted tomorrow or this weekend.

You can also order from Mothers themselves, by going to their website. Try this link for the eStore.

Here's a link for their Dealers/Retailers. I have seen some products for sale at Walmart and local auto parts stores, but the selection is not near what it would be by shopping from a Mothers retailer or online.

Re: whats the best way to polish mag wheels?
 

Mothers direct will rape your billfold, the last I noticed. The Mothers Aluminum polish is available in most Walmart stores (in the smaller containers) I have a couple outlets in my area that I can get the larger containers that last a lot longer. However the 4 ounce "Billet" polish http://www.mothers.com/02_products/05106.html is availible from many supplliers that handle custom wheels and of course on the internet. I purchase mine at a truck supply store in Wichita, Kansas.

Re: whats the best way to polish mag wheels?
 

Great thread on polishing wheels! Not to change the direction, but how does mothers product last on vehicle paint? I need to get the winter off my truck and looking to put a good "wax" job on the paint.

I have purchased the Mothers polishes, mostly because one of my parts store buddies touted it as a "Walk On Water", hands above all paint care system. He was right, the stuff is miraculous. However, it is far more expensive than the stuff I was using at the time and it provided no more shine or paint protection than my stuff that I already had. The Mothers had three (3) different phases of appllication that they wanted their stuff appliled and with that the depth of shine was great. The parts store buddy said he was doing High End cars in his area and charging the owners a lot for the treatment. He then saw my finsih and started to question his investment. as far as I know he is still doing the Mothers on people that want the higher dollar protection, but on his own stuff he has transitioned to another product.

Remember, Black paint is hard to keep clean and shiney, see below. I use a product from the Wizards Company and I buy it by the case to get a good price and sell it to my local friends at my cost. The paint on the truck is 5 years old.

Re: whats the best way to polish mag wheels?
 

D. Passmore

Hey fella, I apologize for letting your post disappear. I started to answer you and for some reason my post ended up on your post. I tried to take away my part to leave yours untouched, but it deleted your whole item for input. Once again I aplogize for the removal, I am still learning this monster and h ow to control it.

You were asking if the Mother's polishes were good for your paint. I tried to give you an answer but did not do so well.

I have an appointment right now and I will get back to you later today. sorry. Frank

Re: whats the best way to polish mag wheels?
 

Its all good! I've never seen that happen on here , though...

Re: whats the best way to polish mag wheels?
 

The answer I was going for, was like this. The Mothers waxes are good and somewhat pricey. I have buddy that does this for high end cars in Wichita, Ks, and he talked me into trying the wax. I used it and from my past experience with brand that I am presently using, I was not that impressed. The Mothers is basically a 3 step process to get the maximum protection, whereas other brands are one or two steps for completion. The extra rubbing and elbow grease was not in my plan.

I have a show truck that has had the paint and flames for over 5 years and the stuff that I use is great for the black paint. The daily driver and the wife's car are coated in the same stuff and it stands up to sun and foul weather quite well. I usually lay a coating on at the beginning of spring and usually in late summer for maximum protection. I use theWizards brand polishes and purchase them from the company, by the case. That way I get it for dealer cost and not over the counter prices.

Re: whats the best way to polish mag wheels?
 

Im in the process of polishing my grill with that mothers aluminum polish.
Am i supposed to use some kind of sealer when im done?
Has anyone used that gords aluminum polish?

Re: whats the best way to polish mag wheels?
 

I never have used Gord's" polish, but it may be a good product. You can seal your aluminum grille after you pollish it, but if it is one of the grilles that has the finned aluminum bars, then the sealer may be more of a time consumer than a return for your money. I use a metal sealer from th eWizard's Line that is good and I am sure there are other brands out there, because I have used some before.


See this website for info

http://www.wizardsproducts.com/store...&cat=24&page=2

Re: whats the best way to polish mag wheels?
 

are they runs well in winter snow fall??