![]() |
Re: 68 GMC 4x4 chassis being built to be a 70 4x4!
I got the powertrain out on Wednesday, now it's a completely bare frame. Wait to you guys see the custom motor mounts that were made to fit the 292 in the SBC crossmember. It's interesting! I'll have more pics tomorrow including the mint driver fender I got and the Satinless West Coast Jr. mirrors!
|
Re: 68 GMC 4x4 chassis being built to be a 70 4x4!
Nice man! Keep at it. Haha. Its always funny some of the stuff you find done to these trucks.
|
Re: 68 GMC 4x4 chassis being built to be a 70 4x4!
3 Attachment(s)
Ok, powertrain is officially yanked! Check out the mount job for the 292!
|
Re: 68 GMC 4x4 chassis being built to be a 70 4x4!
2 Attachment(s)
Here's the driver fender and satinless West Coast Jr. mirrors I picked up. msgross, are you looking for a set of mirrors like these also?
|
Re: 68 GMC 4x4 chassis being built to be a 70 4x4!
good progress.
|
Re: 68 GMC 4x4 chassis being built to be a 70 4x4!
3 Attachment(s)
Progress is slow but steady. When I can work on it I get alot done in big chunks. These couple pics are right after I had the frame blasted and epoxy primed in my drive way. Paint was still tacky but had to get it back in before the rain came.
|
Re: 68 GMC 4x4 chassis being built to be a 70 4x4!
3 Attachment(s)
Pulling the 350 from the donor. Supposed to have originally 59,000 miles. Looks like stock intake and heads and wasn't converted to HEI yet. Will know for sure once I degrease engine and run the part #s.
|
Re: 68 GMC 4x4 chassis being built to be a 70 4x4!
Nice project you've got going! Any progress lately?
|
Re: 68 GMC 4x4 chassis being built to be a 70 4x4!
2 Attachment(s)
Progressing slowly but check this out:
|
Re: 68 GMC 4x4 chassis being built to be a 70 4x4!
I'd like to thank member seadonkey (Nick) for sending me a superb set of transfer case shafts. Your a live saver man!
I'd like to thank Terry from T&B Trans out of Washington for tracking down a rebuild kit for this Rockwell transfer case, I know it wasn't easy man. And finally Mike from Pine Rock Auto in Shelton, CT. He's the dude that totally rebuilt the SM465/Rockwell combo for me. It's as rebuilt and brand new as it could possibly be. I just topped both of them off with gear oil and are ready to install...AWESOME! |
Re: 68 GMC 4x4 chassis being built to be a 70 4x4!
Are you keeping the same springs and axles under it? You are farther along then me. I still have to remove cab, motor, tranny, tc, and passgener fender. I'am at a crossroads now. Should i continue the build with a LWB or look for SWB, which is what i really want.
So far your project is turning out nicely. What will it be when you are finished, Chevy or GMC?:gmc2: |
Re: 68 GMC 4x4 chassis being built to be a 70 4x4!
This is turning into a great build!
|
Re: 68 GMC 4x4 chassis being built to be a 70 4x4!
Quote:
The finished project will be a 70 Chevy K-10 body on a 68 GMC frame. |
Re: 68 GMC 4x4 chassis being built to be a 70 4x4!
Quote:
|
Re: 68 GMC 4x4 chassis being built to be a 70 4x4!
Thanks for the input. I'll have to wait until i finish my 6 weeks of in school training for carpentry. Than i'll start looking for a SWB truck to work on.
When you refer to mods, are you takling about the rusted parts being replaced, or something else? |
Re: 68 GMC 4x4 chassis being built to be a 70 4x4!
Quote:
|
Re: 68 GMC 4x4 chassis being built to be a 70 4x4!
You mentioned in earlier post about front and rear window being removed from cab and than getting it blasted and epoxy primed. Then it was off to the fabricator's.
What is the fabricator doing to the cab? |
Re: 68 GMC 4x4 chassis being built to be a 70 4x4!
Quote:
|
Re: 68 GMC 4x4 chassis being built to be a 70 4x4!
I can't wait to see the results when the cab is done. Have you decided on a color yet?
|
Re: 68 GMC 4x4 chassis being built to be a 70 4x4!
Nice job! I have found that the hardest part of my build is figuring in all the "little" things. I like the epoxy job you did, makes me question my powdercoat decision.
|
Re: 68 GMC 4x4 chassis being built to be a 70 4x4!
Quote:
|
Re: 68 GMC 4x4 chassis being built to be a 70 4x4!
Quote:
|
Re: 68 GMC 4x4 chassis being built to be a 70 4x4!
5 Attachment(s)
First pics is just a parts lot that I need blasted with the cab so I brought all that stuff too. Off to the blaster/fabricator!
|
Re: 68 GMC 4x4 chassis being built to be a 70 4x4!
3 Attachment(s)
Here's the stuff I already brought him to blast. The doors and driver fender had absolutely no filler in them at all. SO HAPPY!
|
Re: 68 GMC 4x4 chassis being built to be a 70 4x4!
2 Attachment(s)
View of the bottom of the cab. It's toast...but look there's the new floor pan already to go. Of course it will also be sand blasted.
|
All times are GMT -4. The time now is 04:14 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com