Re: 1984 C10 parting out*
Quote:
Chuck. |
Re: 1984 C10 parting out*
Quote:
I appreciate the compliment...and I wish you still needed parts...:) |
Re: 1984 C10 parting out*
Quote:
|
Re: 1984 C10 parting out*
no problem Bob, I'll post pics as soon as we get everything apart and cleaned up...thanks man...
Chuck. |
Re: 1984 C10 parting out*
More stuff added...Check the list...
also, I'll have pictures up in a few...gotta eat some dinner first...;) |
Re: 1984 C10 parting out*
how much do you want for the dash ac vent trim above the glove box and the metal strips that the door pulls bolt on to. shipped to 75703
|
Re: 1984 C10 parting out*
Quote:
Chuck. |
Re: 1984 C10 parting out*
i ment the matching trim on the doors you can see them in the pics. sorry.
|
Re: 1984 C10 parting out*
Quote:
Chuck. |
Re: 1984 C10 parting out*
5 Attachment(s)
Pic 1 - AM/FM tape deck front
Pic 2 - GM sticker on side of tape deck Pic 3 - A/C heater control missing fan speed knob Pic 4 - 3 speed Shift indicator Pic 5 - A/C ducts...defroster vents and heater box still in truck...will take pics when removed... |
Re: 1984 C10 parting out*
5 Attachment(s)
Pic 1 - switches starting from left. Red lighted toggle switch $2, Brake light switch $2, Cruise control brake switch $2, Headlight switch w/knob.
Pic 2 - silver Glove box $5, column plastic piece $5, silver under column metal piece $5, 1984 Owner's manual $15 great shape Pic 3 - 1984 Owner's manual great shape Pic 4 - inside of glove box...silver paint and good latch...hinge broken and hole cut in box...can seperate latch if need be... Pic 5 - A/C dash trim w/ silverado emblem...all studs still intact |
Re: 1984 C10 parting out*
5 Attachment(s)
Pic 1 - Silverado emblem on A/C dash trim
Pic 2 - Factory dash speakers and mounts...$5 set Pic 3 - silver ashtray w/ lighter...$5 Pic 4 - sunvisors Pic 5 - B pillar trim |
Re: 1984 C10 parting out*
what is spf?
Quote:
|
Re: 1984 C10 parting out*
5 Attachment(s)
Pic 1 - small crack on bottom hole of driver's B pillar trim
Pic 2 - headliner trim Pic 3 - crack on bottom of passenger's A pillar trim Pic 4 - wiper arms Pic 5 - Gauge cluster w/clock and voltmeter...clear plastic lens and black metal surround over gauges not included |
Re: 1984 C10 parting out*
Quote:
I know you can't send payment until I give you a shipping quote, but at least this way it's shows that it's saved for ya...I got pictures up of them too... and the ashtray was stock nothing modified that I could tell...it did have a cb screwed to the roof at one time though...the bracket was still there...it's in the bed now...lol |
Re: 1984 C10 parting out*
1 Attachment(s)
Back of gauge cluster
|
Re: 1984 C10 parting out*
Oh, ok
now I know lol |
Re: 1984 C10 parting out*
Quote:
|
Re: 1984 C10 parting out*
Yo Fat Hoe you ever get me any pics of the wheel well molding? Jay
|
Re: 1984 C10 parting out*
I still need to take them off...I'm going to take them off tonight...had to stop early and come inside and help my wife with the baby...I'll definitely get them off tonight so you can see...
Chuck. |
Re: 1984 C10 parting out*
Not a prob the baby is more important than any of this truck stuff.
|
Re: 1984 C10 parting out*
4 Attachment(s)
went out and pulled them off real quick...here's the pics...
Pic 1 - all four...pretty good shape... Pic 2 - this is the hole, nick whatever you want to call it that I was telling you about...there are two holes there, one is the screw hole...I think this one can be bent back into shape and look pretty good when finished... Pic 3 - paint scuff with a teeny tiny impression... Pic 4 - another teeny tine impression... the paint mark and the impressions, I normally wouldn't even look at, but I want to be as honest as I can about these...also, I just pulled these off the truck...they haven't been cleaned, I also planned on polishing them a little...let me know what you think... Chuck |
Re: 1984 C10 parting out*
you mentioned on the door panels you had the sliver inserts on them you would sell seperately? Im interested in them..
I would have to see about getting it delivered but if i was able to and I wanted the cab ( CASH COMES FIRST so if someone has cash grab it) how is it underneath with the floors and the supports. Were the rockers replaced and corners? were the inners replaced too ? |
Re: 1984 C10 parting out*
Quote:
the cab looks to be rust free...my dad hasn't done anything body work wise to the truck since he bought it...so if it has replacement panels/parts in it, we don't know about it...I haven't pulled the carpet out of it yet...the seat is coming out this weekend and when it does, I'll pull the carpet out and take some pics of the bare floor boards...also, I'll take some pics of under the cab and the cab supports while we have it on the lift taking the gas tanks and motor and trans out of it... Chuck. |
Re: 1984 C10 parting out*
I think I am gonna pass on the moldings. Send me a total on the belts my zip is 29620. thanks Jay
|
All times are GMT -4. The time now is 03:09 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com