Mine used to be in my bed then this year I hooked up one of those factory style underbed carriers and I love it so far. Sure beats it scraping around in the box. I have used my spare once only.

------------------
1969 Chevrolet Custom Camper 20 350/400 70k original miles, 99% rust free, Never winter driven :)

They have the Internet on Computers now? --Homer Simpson


"Of all the things I miss, I miss my mind the most" - OZZY

Gee_Emm's Page

Vote for my truck to be on the label of a bottle of Jones Soda!!! :)

I had a spare tire sliding around in my bed, but it got flat so i threw it out. Not it is leaning up against our wood pile. I don't usually have a problem with flats on my truck anywan (knock on wood). People in my area are pretty nice and will let a stranger like me use the phone if i knock on the door http://67-72chevytrucks.com/board/ubbhtml/smile.gif.

------------------
Lucas

"Another proud owner of one of the coolest trucks ever built"

drop_shift@hotmail.com

My Daily-Driver: '72 Chevy LWB Custom/10. Rebuilt 350, roughly 300 HP thanks to a 204/214 duration cam, Edelbrock Performer intake and 1406 carb, headers, and 40 seires Flowmaster mufflers. Ochre with a white top. Lots of fun :).

Almost forgot, in all reality to answer the Q, I have it strapped to the bed with the ever-so-important Bungie Cord. (this flat spare looks 10 times better than either of my front tires)
http://longhorntrucks2.freeservers.c...sparholder.jpg

------------------
'69 G.M.C. 350/350. Trying to clean up the left over damage from the Dope-Smokin-Old-Man
I've been dubbed the Longhorn Freak/Fanatic/Expert, I just hope I can live up to it.
FINALLY got the HORNIAC...a '70 one ton Longhorn with a Pontiac 350/350 and lots of 'personality'. Check out The Longhorn Webite.
E-mail longhornmail@yahoo.com
My name is Andy...not Randy...I'm in Ohio...Not Illinois...close enough?
Columbus Ohio




[This message has been edited by longhornmail (edited May 23, 2002).]

Insurance company gives me roadside assistance and I have a cell phone. No spare, jack, or even fix O flat.

------------------
"KEEP IT DOWN!"
70 Jimmy 454 2wd
56 GMC Big Window

Here's mine on my 71 Blazer.I'm sure it would work on a pickup...but prob. wouldn't look right though.
http://www.imagestation.com/picture/...9/fe250574.jpg

http://www.imagestation.com/picture/...e/fe250708.jpg
------------------
"71"blazer,rust free(bought in Arizona),350SBC
(375HP),700R4,factory G.M. TPI.Living in Santa Barbara,California.Ongoing project.


[This message has been edited by BobbyK (edited May 24, 2002).]

[This message has been edited by BobbyK (edited May 24, 2002).]

Nice, did you make that?

------------------
My name is Randy too! (not the one from Illinois) hehe
WWW.Randysrods.freeservers.com
1970 Chevy C-10 shortstep
1930 Ford Model A Coupe 4 inch chop, 350, GMC 671 blower-Hell yeah it's fast!
1987 Harley Sportster
2002 Harley Dyna Wide Glide

Virginia Beach, VA.

Bobby that is sharp. Might have to save those pics for further reference. http://67-72chevytrucks.com/board/ubbhtml/smile.gif

------------------
67 stepside 4x4 Owensville MO mudder67@hotmail.com

I don't have one; I haven't run with one since the last time I pulled it out... I looked at it, and realized it wasn't even effin' round, not to mention being 1" taller than my rears and 2" taller than my fronts (where it won't fit either due to brake clearance issues)...so I just pulled it and the carrier to save weight. I do have a jack and wrench in the truck, along with a can of fix-a-flat, but I have yet to need any of it.

------------------
Project 1970 - soon to be seen at http://milhouse.treylis.org:81/

Randy70C-10,yup...I designed,cut and fit it all together then had a friend TIG weld it up for me.
You can see more detailed pic's here: http://www.imagestation.com/album/?id=4292331995

------------------
"71"blazer,rust free(bought in Arizona),350SBC
(375HP),700R4,factory G.M. TPI.Living in Santa Barbara,California.Ongoing project.

Mines on my truck where it should be, under the rear of the bed , but mines also all origional.

I think it's ryan68 who put an upside down bed wheel well in the back of his box so the spare could sit upright yet down low enough so it can't be seen. He posted some pictures of it a while ago. It's pretty cool.

------------------
Unrestored 68 C-10 CST. 327 4-Speed. 48,000 miles.

1990 2wd plain jane Burb.
Bismarck, ND


See My truck and rare 1967 prototype pictures at:
http://community.webshots.com/user/toms68cst

MSN Messeger: toms68cst@hotmail.com

mine's in the back of the bed...
wanna get it back under the bed sometime soon...
i also carry around a couple cans of fix a flat as well as the tire repair kits with them sticky worm things...

------------------
beat it to fit,
paint it to match...
http://www.geocities.com/maggotspawn/gearhead.html

Here's the tip.Mrs.Panel has a cell phone in case she has problems while she's out.I have a cell phone in case she has a problem while she's out and I'm out also.So I just put my spare in mrs.Panels Blazer and so when I have a flat (if ever Knock on wood),I can call Mrs.Panel to come bring it.
It doesn't bounce around in the truck,it can't be stole4n easily and it doesn't take up room in my truck.

If I ever have a flat I will post the cost of having to have Mrs.Panel bring me my spare.At least she won't have to dig around in the garage and bring the wrong one.

------------------
Deland does Chevys 68Chevy panel(LIZ)
"A man and his truck,it's a beautiful thing"
"I have the body of a god,unfortunately it's Budda"

Mines been under the bed for so long its growing rubber !!!!!! I think its the factory one.

------------------
69 C-10 SWB OWNED 16 YRS 350,350 TURBO,3.73 POSI, BLACK,BURGUNDY INT., ELEANOR,WEST "ALMOST HEAVEN" VIRGINIA ____ 67-72 RUN FOREVER ---- # 3 AND DEI INC. RACE FOREVER

I saw a picture of a truck with the spare in front of one of the wheel wells. He had used another wheel well and turned it upside down and dropped it through the floor. It hides the tire completely.

------------------
70 C-10 350 with weind intake,eldelbrock carb,HEI,305 heads,a mild cam. also a blazer tank w/bed fill,shaved stake pockets and tailgate

Have a capper on mine,had to use a 2x4 to get to the proper height,cant even see it from the outside because the capper is skirted. Anyway , I put an eyebolt into a 2x4, and bought a spare tire kit for $7,and bolted it up

I've got the Samsung i300 spare.

http://www.samsungelectronics.com/mo...s/sph_i300.jpg

Kenneth

I think that mine is on the other truck. LOL I have heard that a S-10 under the bed will work on these trucks. At least I have plans to do that . In the mean time I will work on one for myself. ( See below)

Have your wife follow you with the spare strapped to the honda (that you still have not posted) roof, OR buy that long bed fleetside trailer thats sitting behind my shop to haul it around. Come on by and i'll fix ya up southern style, Bill said he would wire up the trailer for you personally!! heh heh heh

Just bought one of those nice behind the seat tires today!

in the bed... floor jack in the passanger side floorboard