Re: Ultimate work truck/ 70 K10 diesel
SWEEEEETTT!! I love 6.5s!
|
Re: Ultimate work truck/ 70 K10 diesel
I've been asking around on a few different boards about how the gauge clusters work in the newer, 88-98 trucks. I would like to do a dash similar to this, but use a 95-? cluster as the back.
http://67-72chevytrucks.com/vboard/a...1&d=1268375782 Its sounding doable. I found a 96 diesel cluster from a guy here for $50. |
Re: Ultimate work truck/ 70 K10 diesel
I got started on my rear mounts. I made them out of the same 3 1/2" square tube that I made the fronts. The rearend is 40" between spring perch centers, so I used some scrap flat bar, and made a jig that holds the mounts level and the right width apart. That way I can square and level the whole thing as one unit.
http://i447.photobucket.com/albums/q...309_182806.jpg http://i447.photobucket.com/albums/q...309_182820.jpg Once I got them clamped where I wanted them, I started building the hangers. http://i447.photobucket.com/albums/q...309_192631.jpg I still need to make a few more braces, and final weld everything, and I want to take a few more measurements so the truck doesn't crab walk on me. |
Re: Ultimate work truck/ 70 K10 diesel
:metal::metal::metal:
|
Re: Ultimate work truck/ 70 K10 diesel
killer fab work! :metal:
|
Re: Ultimate work truck/ 70 K10 diesel
I got my rear shackle mounts built this weekend. I got a little picture happy so bear with me:lol: First I cut and squared 2 pieces of 1 1/2" sch 80 for the hangars. I laid them in a piece of angle iron to keep them straight, and welded a smaller piece of tube inside them to keep them there.
http://i447.photobucket.com/albums/q...311_170623.jpg http://i447.photobucket.com/albums/q...311_170712.jpg I cut two pieces of 3"x3"x1/4" for the mounts 6" long and bolted them on the frame. Then I tacked the tube with the shackle mounts up where it needed to go. http://i447.photobucket.com/albums/q...312_154948.jpg Then I started tacking the support braces on. http://i447.photobucket.com/albums/q...312_163815.jpg http://i447.photobucket.com/albums/q...312_170510.jpg Once I got the 2 supports on and everything was stable, I was able to take the jig apart, and finish weld everything. http://i447.photobucket.com/albums/q...313_143455.jpg http://i447.photobucket.com/albums/q...313_143511.jpg http://i447.photobucket.com/albums/q...313_163446.jpg I think they turned out pretty good :metal::metal: |
Re: Ultimate work truck/ 70 K10 diesel
Quote:
|
Re: Ultimate work truck/ 70 K10 diesel
updates?
|
Re: Ultimate work truck/ 70 K10 diesel
I have made some progress, but the wife had a class in seattle and she took the computer. If she gets home early enough tonight I'll. Post up some more pics.
Posted via Mobile Device |
Re: Ultimate work truck/ 70 K10 diesel
Quote:
very cool step by step pictures |
Re: Ultimate work truck/ 70 K10 diesel
I got my rear springs rebushed and mounted.
http://i447.photobucket.com/albums/q...322_192216.jpg http://i447.photobucket.com/albums/q...322_192234.jpg I set the frame down on my old running gear, and the motor and tranny in place and threw the cab and fenders on. http://i447.photobucket.com/albums/q...326_133533.jpg http://i447.photobucket.com/albums/q...327_140621.jpg the tires are 245/70-16. I think with 33"s it'll look good. |
Re: Ultimate work truck/ 70 K10 diesel
Got a new little wrinkle. I found out the other day that the flywheels for the 6.2's and the 6.5's are different. My flywheel and clutch is from a 6.2. So now I'm on the hunt for another flywheel.
|
Re: Ultimate work truck/ 70 K10 diesel
Quote:
Of course you know you if you cant find a flywheel, you can always find a Cummins! :metal: |
Re: Ultimate work truck/ 70 K10 diesel
I pushed the truck out again to make room for my parts truck so I could pull my 6.5 out. The driveway's a little muddy so I hooked onto it with our durango and had the wife pull it out of the way. I remembered too late that the axles weren't bolted to the springs.
http://i447.photobucket.com/albums/q...402_172746.jpg http://i447.photobucket.com/albums/q...402_172726.jpg I dragged my cherry picker out in the mud and got everything back where it was supposed to be. So far, I haven't found any damage except my ego.:uhmk: |
Re: Ultimate work truck/ 70 K10 diesel
LOL its ok i drove my truck not too long ago without tightening the 2 lug nuts that were on(8 lug truck) and the driver rear wheel fell off.glad to see im not the only nuts one out there haha.jkk:)
|
Re: Ultimate work truck/ 70 K10 diesel
Oh boy that could have been much worse! Good to see it's gonna be ok. :uhmk:
|
Re: Ultimate work truck/ 70 K10 diesel
Look forward to seeing sitting back up on the axles man.....
|
Re: Ultimate work truck/ 70 K10 diesel
Work has kept me either busy, or exhausted, but I finally got my 6.5 out of my 93. By far the biggest pain in the ass to get that out.
http://i447.photobucket.com/albums/q...417_180929.jpg I built a platform to reach the back of the motor. works good if you need to be that way for a while. http://i447.photobucket.com/albums/q...412_194604.jpg Now I just need to figure out which sensors and wires I need, and then I can get the 93 out of here. Anybody know if you can convert the newer style ac pumps to an on board air compressor? I also need a layout of the wiring and sensors for a 93 K2500. |
Re: Ultimate work truck/ 70 K10 diesel
|
Re: Ultimate work truck/ 70 K10 diesel
Makin progress slowly. I'm trying to get the frame finished so I can clean and paint it. I needed to clearance a couple of crossmembers for the 4" exhaust, and patch a few holes. I'll post some pics soon.
|
Re: Ultimate work truck/ 70 K10 diesel
what are those 16inch steel rims off of? they are 6 lug I see.....I have been looking some of those but dont know what years or models to look for...btw, nice build. I am about done with my 6.2 swap into my 71 burb!
|
Re: Ultimate work truck/ 70 K10 diesel
I'm pretty sure they are the stock rims that came on my 70 k10. Do you want them? I'm not gonna use them.
Posted via Mobile Device |
Re: Ultimate work truck/ 70 K10 diesel
Yes sir....I do want them. Send me ur number bud. Thanks. Tommy
Posted via Mobile Device |
Re: Ultimate work truck/ 70 K10 diesel
Sweet build!!! I will be following along with great interest.
|
Re: Ultimate work truck/ 70 K10 diesel
Finally got the frame done,cleaned, and started painting. I'm useing napas version of por-15.
A while back I borrowed a 33" and bolted it on to see how it looked. http://i447.photobucket.com/albums/q...427_203844.jpg I'm gonna have to run 35's I think. While the frame was upside down I built my rear shockmount crossmember. http://i447.photobucket.com/albums/q...517_191638.jpg I'll get some pics soon of the painted frame. |
All times are GMT -4. The time now is 07:29 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com