The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Blazer and Suburban Stuff (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=199)
-   -   NC Parting a complete 1971 Blazer 4x4 (https://67-72chevytrucks.com/vboard/showthread.php?t=500099)

blazin71K5 12-28-2011 09:17 AM

Re: Parting a complete 1971 Blazer 4x4
 
P.M. Sent about shipping quote for seat belts, sunvisors, and seat tracks.

blazin71K5 12-28-2011 10:03 AM

Re: Parting a complete 1971 Blazer 4x4
 
Quote:

Originally Posted by 70BLAZERX2 (Post 5087167)
I was 1st in line asking on the seat tracks

look at my post on the first page in my post above yours I had alredy asked about them, therefore I believe I was first in line.

jeffg1010 12-28-2011 10:43 AM

Re: Parting a complete 1971 Blazer 4x4
 
Quote:

Originally Posted by 70BLAZERX2 (Post 5087206)
well you can get them...thats too much for them anyway

Aw, come on man... don't be bashing my prices. Especially right in my thread. It's not cool and it's against policy.

I've never parted a truck, and I had no clue where to start pricing this stuff, so I spent two hours weeding through the WIW thread and the Blazer/Suburban thread to see what other members were offering these parts for.

Thanks for your interest, but if you think I am WAY off base on a price, talk to me about it. I am not doing this to get rich, I just want it out of the way.

rockc 12-28-2011 10:45 AM

Re: Parting a complete 1971 Blazer 4x4
 
I will take carpet strip hold downs pending pic's and condition.

jeffg1010 12-28-2011 01:53 PM

Re: Parting a complete 1971 Blazer 4x4
 
Quote:

Originally Posted by LUCKTRUCK (Post 5086752)
$20. sounds good for the prop. valve bracket.

I'll take it. Please send me your payment info.

I will hold off until I get it off before I start taking payments. Just want to make sure there is no issue. I will let you know next week.

Quote:

Originally Posted by botmfedr1 (Post 5086756)
Put me first in line for Radiator shroud pending : its original for 307, and no cracks, breaks, or repairs.

shipping to 79908. please send me pics via text if possible (253-495-0880)

thanks,
Mondo

No problem, I'll get a pic for you

Quote:

Originally Posted by 72blazr (Post 5086948)
Interested in the bolt down plates #32 pending pic. Are those prices shipped??

I'll get you a pic

Quote:

Originally Posted by c1069 (Post 5087005)
its a 4 core radiator? Or?

I will have to check for you

Quote:

Originally Posted by blazin71K5 (Post 5087124)
P.M. Sent about shipping quote for seat belts, sunvisors, and seat tracks.

Yep, got it. They are yours if you want them. I will get you pics next week, once you see what you want, let me know and I will get you a shipping quote. The sunvisors and mounts I am keeping for my BLazer as they are missing. I forgot to put that in the description.

Quote:

Originally Posted by rockc (Post 5087241)
I will take carpet strip hold downs pending pic's and condition.

This is one part I am not sure of at all. If they are there, I will take a look at their condition and post pics

gcburdic 12-28-2011 02:27 PM

Re: Parting a complete 1971 Blazer 4x4
 
Quote:

Originally Posted by 70BLAZERX2 (Post 5087206)
thats too much for them anyway

Buyers Code of Conduct 67-72chevytrucks.com

VI.If you do not like the price of an item, look further. Comments on value, condition etc will not be tolerated.


As OP stated, it's against forum policy to make this comment....please move on and keep you comments to yourself if you don't like the pricing

LUCKTRUCK 12-28-2011 06:00 PM

Re: Parting a complete 1971 Blazer 4x4
 
no rush on the prop. valve bracket. Just let me now when you're ready for payment. Thanks!

68lowburb 12-28-2011 08:53 PM

Re: Parting a complete 1971 Blazer 4x4
 
put me inline for the rear bumper, will take the rear bumper brkts if i get bumper or not just let me know thanks jimmy

BBrendal 12-28-2011 11:13 PM

Re: Parting a complete 1971 Blazer 4x4
 
Quote:

Originally Posted by gcburdic (Post 5087591)
Buyers Code of Conduct 67-72chevytrucks.com

VI.If you do not like the price of an item, look further. Comments on value, condition etc will not be tolerated.


As OP stated, it's against forum policy to make this comment....please move on and keep you comments to yourself if you don't like the pricing

Please correct me if Im wrong but is 70blazerx2 forum staff? If so shouldnt he know this?

gcburdic 12-28-2011 11:23 PM

Re: Parting a complete 1971 Blazer 4x4
 
Quote:

Originally Posted by BBrendal (Post 5088439)
Please correct me if Im wrong but is 70blazerx2 forum staff? If so shouldnt he know this?

He is not forum staff....

CORSAIR 12-29-2011 09:44 PM

Re: Parting a complete 1971 Blazer 4x4
 
Jeff,
I will take them, I will send you a PM to get your payment info and my shipping address


Thanks,
Fred

1969blazer 12-30-2011 02:10 AM

Re: Parting a complete 1971 Blazer 4x4
 
Do you still have the rear hatch strikers and rubber stops at the rear hatch? If so, I want them. Let me know if you have them and if so how much including shipping to get them to 95819. Thank you.

hvacfatboy 12-30-2011 10:10 AM

Re: Parting a complete 1971 Blazer 4x4
 
Hey Jeff I am interested in the windshield frame and possibly the firewall will you take $200.00 for both and I will come and cut them out. I am about 2 hrs away in durham thanks Richie. Also let me know when I can come 919-730-8155

Gary 70 Jimmy 12-30-2011 10:19 AM

Re: Parting a complete 1971 Blazer 4x4
 
Quote:

Originally Posted by Gary 70 Jimmy (Post 5085877)
put me in line for the speaker under the dash

Did the speaker sell yet if not I will take it.

hvacfatboy 12-30-2011 10:21 AM

Re: Parting a complete 1971 Blazer 4x4
 
Jeff Im interested in the windshield frame and possibly the firewall all as one piece will you take 200.00 for both and I can come and get it I am in the raliegh durham area and can come to you when you get it back. thanks Richie call me if needed 919-730-8155

jeffg1010 12-30-2011 11:37 AM

Re: Parting a complete 1971 Blazer 4x4
 
Quote:

Originally Posted by CORSAIR (Post 5090170)
Jeff,
I will take them, I will send you a PM to get your payment info and my shipping address
Thanks,
Fred

Got the PM, you are first in line. I just want to get them off before I get payment. Ya never know, I might damage them while getting them off. haha, I will add a pic once I get them off.

Quote:

Originally Posted by 1969blazer (Post 5090807)
Do you still have the rear hatch strikers and rubber stops at the rear hatch? If so, I want them. Let me know if you have them and if so how much including shipping to get them to 95819. Thank you.

I will have to look to see if this is something I need for mine. If not, they are yours.

Quote:

Originally Posted by hvacfatboy (Post 5091097)
Hey Jeff I am interested in the windshield frame and possibly the firewall will you take $200.00 for both and I will come and cut them out. I am about 2 hrs away in durham thanks Richie. Also let me know when I can come 919-730-8155

Sounds good. I'll take that. Did you see the truck is at my dads in WV? Not my house in Mooresville. I can bring it back to Mooresville in one piece if you show me where you want it cut.

Quote:

Originally Posted by Gary 70 Jimmy (Post 5091104)
Did the speaker sell yet if not I will take it.

teeitup has first dibs on the speaker, but I've got you in line for it.

CORSAIR 12-30-2011 03:10 PM

Re: Parting a complete 1971 Blazer 4x4
 
Jeff,
No hurry here, they will come with the top chrome strips correct? just let me know when you get a time, I still want them... "Have a Happy New Year"
(your going to need it after this part out thread) LOL

Thanks,
Fred

rsavage 12-30-2011 06:13 PM

Re: Parting a complete 1971 Blazer 4x4
 
Jeff,
I believe I am 2nd in line on the speaker (post #9). If Randy passes, pm me the payment info. Thanks.

ccr72 12-30-2011 08:55 PM

Re: Parting a complete 1971 Blazer 4x4
 
interested in the power steering set up. shipped to 62846. thanks Ronnie

ccr72 12-30-2011 08:58 PM

Re: Parting a complete 1971 Blazer 4x4
 
Quote:

Originally Posted by ccr72 (Post 5092183)
interested in the power steering set up. Shipped to 63846. Thanks ronnie

63846

jeffg1010 12-31-2011 07:30 PM

Re: Parting a complete 1971 Blazer 4x4
 
ttt

72blazr 12-31-2011 10:16 PM

Re: Parting a complete 1971 Blazer 4x4
 
Still waiting on pics for #32 rear seat clamps. Thanks
Posted via Mobile Device

Leroy-B1 12-31-2011 10:42 PM

Re: Parting a complete 1971 Blazer 4x4
 
interested in rear bumper if available still and does it include tag holder?

jeffg1010 01-01-2012 10:12 PM

Re: Parting a complete 1971 Blazer 4x4
 
I hate to say it, but their forecast changed and they are now expecting snow tomorrow through Wednesday. It will be later in the week before I can get up there, get photos and pull parts.

47thriftmaster 01-01-2012 10:29 PM

Re: Parting a complete 1971 Blazer 4x4
 
No problem for me, will still take the bumpers and wait for pics on the doors. You should pull that thing down here to take apart, can't beat the winter we're having so far. Just let me know when your ready.


All times are GMT -4. The time now is 11:05 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com