Re: Parting 77 Scottsdale 1/2 ton 4x4
 

if the other one you're gonna part out has the dome/cargo light that flips down, i'd be very interested.

Re: Parting 77 Scottsdale 1/2 ton 4x4
 

tim...I will check the other truck next week.

Bob... The gas tank doors look good, but there is primer on the outside. I don't think the po used bondo, but not 100% sure as the inside looks clean. $5 each door plus shipping and I'm still trying to unscrew the bolts...pb blaster.

Thanks,
Ray

Re: Parting 77 Scottsdale 1/2 ton 4x4
 

How much for a good piece of the bed say 1.5ft x 1.5ft? Shipped to 37138 Yeah, I just need a small patch for the back right corner and not sure I want to hammer it right lol

Re: Parting 77 Scottsdale 1/2 ton 4x4
 

The bed is pretty clean on this one so I don't want to cut it up yet.
Thanks,
Ray

Re: Parting 77 Scottsdale 1/2 ton 4x4
 

ok, maybe ill pound a piece out then lol

Re: Parting 77 Scottsdale 1/2 ton 4x4
 

any pics of the seatbelts and sun visor

Re: Parting 77 Scottsdale 1/2 ton 4x4
 

Sorry, they are junk.

Re: Parting 77 Scottsdale 1/2 ton 4x4
 

Brian, I pulled the heater box and it looks good. Shipping to MA is going to be $25 for a total of $55.
Thanks,
Ray

Re: Parting 77 Scottsdale 1/2 ton 4x4
 

are the cargo tie downs on yhe bed still there?

Re: Parting 77 Scottsdale 1/2 ton 4x4
 

Payment sent for cab light Thanks.

Re: Parting 77 Scottsdale 1/2 ton 4x4
 

Looks and sounds good to me. I'll take it. Pm sent.

Re: Parting 77 Scottsdale 1/2 ton 4x4
 

Yes, I just checked and all 6 are there. They have some scratches and some pitting, but look to be in good useable shape. $20 shipped for all 6.
Thanks,
Ray

Re: Parting 77 Scottsdale 1/2 ton 4x4
 

Hey Ray, Payment sent through Paypal. Let me know if it didn't go through. Anything on the torx head srcews? Thanks, Brian

Re: Parting 77 Scottsdale 1/2 ton 4x4
 

Sorry, I forgot...they are phillips.
Thanks,
Ray

Re: Parting 77 Scottsdale 1/2 ton 4x4
 

still waiting to hear about those gas doors if ya have time :)

Re: Parting 77 Scottsdale 1/2 ton 4x4
 

He posted up the door at the top of the 2nd page :)

Re: Parting 77 Scottsdale 1/2 ton 4x4
 

????????????????????????????????????

Re: Parting 77 Scottsdale 1/2 ton 4x4
 

Bob, I posted pics at the top of page 2. I am soaking the screws with pb and hope to have them pulled soon.
Stew...In CA, when you don't register your vehicle on time the DMV charges huge penalties especially after 3 years.

Re: Parting 77 Scottsdale 1/2 ton 4x4
 

i didnt notice the pics sorry... ill definately take em both give me a quoate and i can paypal you or do amoney order whichever you prefer

Re: Parting 77 Scottsdale 1/2 ton 4x4
 

Bob, I will get you a shipping quote when they are pulled.
Thanks,
Ray

Re: Parting 77 Scottsdale 1/2 ton 4x4
 

Ray,

Are you interested in parting with the flywheel inspection cover? I am also looking for a clutch fork spring, cluthc fork push rod retainer spring, and some factory bolts to mount the bell housing to the block.

Thanks,
Mike

Re: Parting 77 Scottsdale 1/2 ton 4x4
 

I will check, but I think the only thing I have is the fork spring The bolts are buried.
Thanks,
Ray

Re: Parting 77 Scottsdale 1/2 ton 4x4
 

Here's the fork spring. I'm still trying to find a flywheel cover. $7 shipped for the spring.
Thanks,
Ray

Re: Parting 77 Scottsdale 1/2 ton 4x4
 

radio any good????
--Mike

Re: Parting 77 Scottsdale 1/2 ton 4x4
 

Sorry, the radio is junk.
Thanks,
Ray