Re: 71 GMC/Chevy Build
4 Attachment(s)
The time has come to base & clear the interior, back sides of doors, hood, and fenders. Decided on Volkswagon / BMW silver. PPG will be the product of choice.
|
Re: 71 GMC/Chevy Build
looking good
|
Re: 71 GMC/Chevy Build
4 Attachment(s)
Base coat and clear coat complete. Sanded and buffed. Next up fitting of the doors, fenders, and hood.
|
Re: 71 GMC/Chevy Build
4 Attachment(s)
Hanging the doors
|
Re: 71 GMC/Chevy Build
Looks great!!!
|
Re: 71 GMC/Chevy Build
Looks really slick!
|
Re: 71 GMC/Chevy Build
Wow, nice Burb!
|
Re: 71 GMC/Chevy Build
Paint looks really good
|
Re: 71 GMC/Chevy Build
Wow man what can I say,,,, That's going to be one sweet suburban!!!! Can't wait to see it up close and personal. It's nice to have a fellow builder here in the valley,,, for some reason there's not too many guy's on here from the area, although there are a ton of these old trucks running around here! Thanks for the motivation, keep up the good work!!!:chevy::gmc2:
|
Re: 71 GMC/Chevy Build
Nice!
|
Re: 71 GMC/Chevy Build
2 Attachment(s)
Spent months with wiring project, exhaust system, AC system, and dash panel.
As you all know a big boost to any project is when you get to start the engine for the first time. Fired right up. Found I HATE the exhaust. 3/4 length headers with 2.5" pipe and Borla mufflers. Tail pipes exit in front of the rear tires. Switched to Hooker mufflers ( worse yet ) then on to 50 series Flowmasters. Much better. Now I can hear myself think. Ran the tail pipes to the rear. Now I have a funny popping sound under heavy throttle. Found I can get rid of this the further back I move the mufflers. I only had room to move them about 14". Did not seem like it would do much but what a difference. Getting ready to fab another system for my 80 K10. Trying the Magnaflow 6" round x 24". Dual 2.25" into a Y pipe then 3" into the muffler and on to the rear. Anxious to hear this set up. I will post photos on my other build site. Finished the Vintage Air. Lost 80% of my glove box. Fabbed a metal insert to house the ECM for the fuel injection as well as my CenTek fan control. Great place for my rear airbag controls also. Dash panel is for the most part complete. Had an extra B&M shifter laying around. Used it. It is now laying around more. Hated it as much as the Borla and Hooker mufflers. Now have a Lokar floor shift to operate the 700R4. |
Re: 71 GMC/Chevy Build
Looking great!
Posted via Mobile Device |
Re: 71 GMC/Chevy Build
Nice clean setup in the area formerly known as the glove box.
|
Re: 71 GMC/Chevy Build
4 Attachment(s)
Ready for glass and interior. Engine compartment is for the most part complete.
|
Re: 71 GMC/Chevy Build
WOW!! That looks sweet nice work
|
Re: 71 GMC/Chevy Build
^^agreed^^ it looks good to go as it sits now.....color, wheel/tire combo and ride height look spot on, well done!
|
Re: 71 GMC/Chevy Build
4 Attachment(s)
Been a while. You know how it is, Work before pleasure. At any rate I have always liked the Ford F150 mirors so I thought I would give them a shot. Glad I did.
At first fit the angle of the dangle was incorrect so I had to fabricate from wood a couple of spacers. 12 degree seems to be the perfect angle so the mirrors set level. Machined some new bases from aluminum and all fit together fine. Good visability with enough mirror to see my Airstream behind and not to bulky as to be the first thing you see when one approches the truck. |
Re: 71 GMC/Chevy Build
Beautiful project you have going!
|
All times are GMT -4. The time now is 05:34 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com