The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   FAQ Truck Tech (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=92)
-   -   suggested to do a writeup for here like this (https://67-72chevytrucks.com/vboard/showthread.php?t=563243)

Devillusion 07-09-2011 12:14 AM

Re: Power Window Relay Mod?
 
Nice.....gonna have to try this one during my power group swap.

conman585 07-26-2011 10:30 PM

Re: Power Window Relay Mod?
 
Quote:

Originally Posted by TheApocalyptican (Post 4779439)
Just did this on the front drivers side window. Up or down now takes 3 seconds flat, vs 4 going down before, and 4.5 going up.

Any more success stories w/ this relay mod?

tashspop 07-27-2011 06:47 AM

Re: Power Window Relay Mod?
 
my next electrical mod after i finish under hood.

conman585 07-30-2011 06:50 PM

Re: Power Window Relay Mod?
 
been working on this all day now and all i get is a clicking sound from the relays. I've retraced my wiring and its all correct. I don't get what I'm doing wrong and its driving me nutts.

mikep87swb 07-30-2011 08:09 PM

Re: Power Window Relay Mod?
 
Hey there I am working on this also and for me it works perfect
Can you give me some more insight on how you have it wired and I can hopefully help. My drivers side is done and I will finish up my pass side tomorrow.

Thanks
Mike
Posted via Mobile Device

conman585 08-01-2011 02:32 AM

Re: Power Window Relay Mod?
 
Broke out the test light and found my problem. It ended up being a $1.32 splitter that was interrupting my power source. I just took for granted that it wasn't impeding the flow from the junction block. Windows are definitely quicker now.

mikep87swb 08-05-2011 02:52 PM

Re: Power Window Relay Mod?
 
Hi there.

I am also in the process of doing this mod to my windows and it's definately awesome... Drivers side works perfect, but I have a small issue with the passenger side that I beleive is not even relay related...

Before I did this mod my passenger window would only go down a few inches and then stop..... then I had to wait a minute or so before i could get it to continue down another few inches...

With the relay mod I thought it would fix that issue.... but it did not and now it goes down the same 5 or 6 inches but of course faster before it stops....

At this point I am thinking it's a switch or motor issue.... what else could it be and how can i test to see which one it really is before I go and buy both and replace...

Any help is certainly appreciated...
Thanks
Mike

qu1cks1lver56 08-05-2011 08:09 PM

Re: Power Window Relay Mod?
 
bypass the switch and just touch the wire to power. if it still does it, possibly motor or other related


All times are GMT -4. The time now is 01:14 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com