The 1947 - Present Chevrolet & GMC Truck Message Board Network
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)
-   -   side pipes- lots of pics wanted (https://67-72chevytrucks.com/vboard/showthread.php?t=571940)

naphtali5725 04-04-2013 11:31 AM
Re: side pipes- lots of pics wanted
 
Quote:
Originally Posted by motornut (Post 5990711)
I like them too but around here you'd get pulled over for those
unless it's old enough,too ez to tell no cat
a lady i know locally has her cobra stuck in the garage
caught with those on she got some hefty fines,plates seized,but thats here
that's too bad, but if I had a cobra, I'd put whatever i had to on it just to be able to drive it.
all i can say is i'm glad i'm here :)

i heart square bodys 04-05-2013 08:58 PM
Re: side pipes- lots of pics wanted
 
im lucky enough to live in an area where i dont need a cat :)

1985_C10 04-09-2013 01:41 AM
Re: side pipes- lots of pics wanted
 
Quote:
Originally Posted by bohmankid (Post 5972194)
The first two pics are what it looked like when i bought the truck.

Attachment 1082701

Attachment 1082702

I redid the entire exhaust with the 2 1/4 inch kit from summit racing. I tucked them up before the leaf springs and put 4 inch slanted tips on there. They're about half an inch away from the body. Close to the gas tanks, but I ditched the side saddle tanks and put in a blazer tank in the back.

Attachment 1082703

Attachment 1082704

Attachment 1082705

how did you do the single tank? i want to get rid of the saddle tanks on my truck too. is there a place to mount the single tank in the back or do you have to rig it?

bohmankid 04-09-2013 01:07 PM
Re: side pipes- lots of pics wanted
 
Quote:
Originally Posted by 1985_C10 (Post 6000257)
how did you do the single tank? i want to get rid of the saddle tanks on my truck too. is there a place to mount the single tank in the back or do you have to rig it?
I bought a 31 gallon Suburban tank and mounted it in the back. I had to drill out my crossmembers and relocate them. Check out post #48 of MY BUILD THREAD. The video shows a quick glimpse of the tank. I still need to take pics of it and post it to my thread. Also, check out THIS LINK. It has a vague step by step of how Captkaos did his tank swap.


Also, @i heart square bodys, I just finished my new side exit exhaust. I'll take some pics and maybe a video tonight and try to get them on here..

1985_C10 04-10-2013 01:58 AM
Re: side pipes- lots of pics wanted
 
Quote:
Originally Posted by bohmankid (Post 6000967)
I bought a 31 gallon Suburban tank and mounted it in the back. I had to drill out my crossmembers and relocate them. Check out post #48 of MY BUILD THREAD. The video shows a quick glimpse of the tank. I still need to take pics of it and post it to my thread. Also, check out THIS LINK. It has a vague step by step of how Captkaos did his tank swap.


Also, @i heart square bodys, I just finished my new side exit exhaust. I'll take some pics and maybe a video tonight and try to get them on here..
so what was the point of him putting the spare tire thing back on? i thought he was gonna use it to bolt the straps to but it looks like theyre bolted to some angle iron...

bohmankid 04-10-2013 03:22 AM
Re: side pipes- lots of pics wanted
 
4 Attachment(s)
Quote:
Originally Posted by 1985_C10 (Post 6002508)
so what was the point of him putting the spare tire thing back on? i thought he was gonna use it to bolt the straps to but it looks like theyre bolted to some angle iron...
It's to hold the tank from the top. the straps hold it from the bottom, and he needed something to push it back down. I used angle iron, personally. I know it's confusing, I didn't know what it was for until I actually dove into it myself.

Anyway, here are pics of my new exhaust setup. You can see how close it is to the ebrake. Doesn't bother me, and doesn't hurt anything. I've driven it quite a few miles like this.

Attachment 1090140
Attachment 1090141
Attachment 1090142
Attachment 1090143

And here is an exhaust video link to youtube I made earlier.

i heart square bodys 04-10-2013 12:33 PM
Re: side pipes- lots of pics wanted
 
Quote:
Originally Posted by bohmankid (Post 6002543)
It's to hold the tank from the top. the straps hold it from the bottom, and he needed something to push it back down. I used angle iron, personally. I know it's confusing, I didn't know what it was for until I actually dove into it myself.

Anyway, here are pics of my new exhaust setup. You can see how close it is to the ebrake. Doesn't bother me, and doesn't hurt anything. I've driven it quite a few miles like this.

Attachment 1090140
Attachment 1090141
Attachment 1090142
Attachment 1090143

And here is an exhaust video link to youtube I made earlier.
lets see a video ! looks awsome man ! thanks for all your help

bohmankid 04-10-2013 12:38 PM
Re: side pipes- lots of pics wanted
 
Quote:
Originally Posted by i heart square bodys (Post 6003078)
lets see a video ! looks awsome man ! thanks for all your help
I posted a link of the video. it's hiding under all the pics LOL

edit: here ya go haha http://www.youtube.com/watch?v=Q2ecF1tE9-8&feature=youtu.be


All times are GMT -4. The time now is 06:32 PM.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com