![]() |
Re: '72 Drop member... "Betty"
knockin it out ...subscribed. ill be changing my complete seat out and maybe door panels, instruments if interested PM me.
|
Re: '72 Drop member... "Betty"
3 Attachment(s)
Made some good progress today. Got the cab off the frame. Willie stripped it down to the bare rails so it's ready for porterbuilt stuff. All suspension should be here tomorrow. Super stoked. Also got the cab down to the shop and started shaving the firewall. Cut an access hole for the vintage air lines to run through the side of the firewall and through the fender
|
Re: '72 Drop member... "Betty"
nice!
|
Re: '72 Drop member... "Betty"
Thank you. We got all the porterbuilt stuff laid out . Willie will start putting it on soon. Hats off to Nate and Dave at porterbuilt! They put out quality stuff and it is worth every penny. Sloshtubz are on their way as well!
Let me know what you think. More pictures soon |
Re: '72 Drop member... "Betty"
Any type of progress is good in my book. This should be fun to follow along for the build at such an early stage, I always seem to be late to the party. :metal:
|
Re: '72 Drop member... "Betty"
2 Attachment(s)
@Porterbuilt
|
Re: '72 Drop member... "Betty"
Quote:
|
Re: '72 Drop member... "Betty"
You may end up wishing you kept the two piece driveshaft. I noticed you got the non-carrier bearing trailing arm crossmember from Porterbuilt.
|
Re: '72 Drop member... "Betty"
Looks like it was a nice truck to start with. Waiting to see how you finish it up!
|
Re: '72 Drop member... "Betty"
Quote:
|
Re: '72 Drop member... "Betty"
The new location did not work for mine. I used an old long bed 2piece shaft and I still have to weld a mount between the ladder bar perches in order to keep the rear shaft piece the same length. If a new drive shaft is being made then it is supposed to align angles better from what Dave and Nate said. Just what I found when going through the heartache of getting my driveshaft fit up.
|
Re: '72 Drop member... "Betty"
Quote:
|
Re: '72 Drop member... "Betty"
Looks like another nice build! Subscribed.
|
Re: '72 Drop member... "Betty"
1 Attachment(s)
Haha. Just found this picture on my phone. Look closely. I didn't realize I couldn't be in the left lane doing 75 mhp in California. In Colorado we run 80. Lmao. Oops
|
Re: '72 Drop member... "Betty"
Busted by the CHP. ...:waah:
|
Re: '72 Drop member... "Betty"
Keep up the great build.
|
Re: '72 Drop member... "Betty"
1 Attachment(s)
Look what just arrived! Super nice product from a super nice guy! Thanks mike. @sloshtubz
|
Re: '72 Drop member... "Betty"
Awesome, thanks man ! Man I am having "Project Envy" I have got to get me another project and get back on the board !
|
Re: '72 Drop member... "Betty"
It's a love hate relationship. I so anxious to see it finished. Trying not to go to deep because I want a nice driver. Not an over the top show car. Stuff adds up so quick.
|
Re: '72 Drop member... "Betty"
Quote:
|
Re: '72 Drop member... "Betty"
3 Attachment(s)
Little progress today. Got hood hinges installed and mocked up the vintage air. Welded some studs to the inside of the firewall so I don't have to bolt through the firewall. Make sense? Also started to get the rack and pinion installed. Long Day, but it doesn't look like it.
|
Re: '72 Drop member... "Betty"
1 Attachment(s)
Willie took the lifted edge of the frame and made it flat. Makes it look so clean.
|
Re: '72 Drop member... "Betty"
I like that! It is the little details that make a difference.
|
Re: '72 Drop member... "Betty"
Did you just heat it and hammer it out?
|
Re: '72 Drop member... "Betty"
No,cut it out with plasma cutter, made a filler piece and welded it in.
|
All times are GMT -4. The time now is 06:37 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com