The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   67-72 Chevrolet & GMC Pickups Projects and Builds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=115)
-   -   "Strapped For Cash" (https://67-72chevytrucks.com/vboard/showthread.php?t=655016)

ArtMolina 01-14-2015 10:50 PM

Re: "Strapped For Cash"
 
5 Attachment(s)
Working on the gas tank.

Used a 1987 Jeep Wrangler tank. 15 galllon
1987 S10 Blazer sending unit (20 gallon tank)- Spectra Premium FG03B.. Cut the tabs to get it to rotate so the float would clear the baffle.
Fuel pump- AC Delco EP381
Straps- Spectra Premium ST01

ArtMolina 01-14-2015 10:52 PM

Re: "Strapped For Cash"
 
3 Attachment(s)
More pictures of the gas tank. Using 1/2" angle iron to get it to mount up.

ArtMolina 01-14-2015 10:56 PM

Re: "Strapped For Cash"
 
3 Attachment(s)
Got the cab on. I need to cut the transmission tunnel. I know that a lot of guys haven't had to cut the tunnel but I raised my transmission to get the right angle.

ArtMolina 08-02-2015 11:22 PM

Re: "Strapped For Cash"
 
I'll post some updates on this tomorrow...

ArtMolina 11-18-2015 01:33 AM

Re: "Strapped For Cash"
 
I haven't had a chance to get any pictures up. I have the complete truck on instagram. Check it out, it's under user art_molina
I'll post pictures...

ArtMolina 11-18-2015 01:46 AM

Re: "Strapped For Cash"
 
5 Attachment(s)
Here are some pictures, Had the entire truck sandblasted and powder coated with black primer..

ArtMolina 11-18-2015 01:50 AM

Re: "Strapped For Cash"
 
3 Attachment(s)
Some more pictures.. The last pictures shows my 69, parked out front.. waiting it's turn.
I managed to fit 20x10 all the way around, had to mess with the tire size to get them not to rub.. Looks pretty good, I think....:metal:

ArtMolina 11-18-2015 01:52 AM

Re: "Strapped For Cash"
 
2 Attachment(s)
Heres the frame, before the body... I got rid of those stock upper control arms, I went with tubulars so I could run the 20x10 up front without rubbing issues.

highanglehell 11-18-2015 04:33 AM

Re: "Strapped For Cash"
 
Can't believe you had the hole truck powder coated it looks slick love the build

FRANKENSTEINC10 11-18-2015 08:47 AM

Re: "Strapped For Cash"
 
Very awesome build. Truck looks sick

ArtMolina 11-18-2015 01:38 PM

I wanted to make sure that the rust was all gone and that the paint would stick to the metal. The way to make sure this happens is to sandblast and powder coat. It was $350 to blast and coat the cab. Not too bad.
Posted via Mobile Device

Hart_Rod 11-19-2015 10:31 AM

Re: "Strapped For Cash"
 
Nice build.

ArtMolina 09-08-2016 05:45 PM

Re: "Strapped For Cash"
 
4 Attachment(s)
A lot has happened since my last post, the truck is almost done.. My brother took one look at the truck and asked if he can have it... Its his now.. I have about 4 other projects going, check them out on Instagram @Art_Molina and @restorodstemecula

midnight rambler 09-08-2016 06:01 PM

Re: "Strapped For Cash"
 
looking good Art

mooseknuckles 09-08-2016 08:42 PM

Re: "Strapped For Cash"
 
nice!

swamp rat 09-09-2016 03:48 AM

Re: "Strapped For Cash"
 
Can I be your brother next time around??? :)

ArtMolina 10-22-2020 01:54 PM

Re: "Strapped For Cash"
 
My brother sold the truck, he probably drove it a handful of times.. He was able to get around $45K for it... Not too bad..


All times are GMT -4. The time now is 06:53 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com