The 1947 - Present Chevrolet & GMC Truck Message Board Network
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Racing and high performance (trucks haulin more than hay) (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=60)
-   -   Turbo gentlmen (https://67-72chevytrucks.com/vboard/showthread.php?t=710990)

tinydb84 07-14-2016 05:36 PM
Re: Turbo gentlmen
 
What about an old style roots blower on a modern LS? This thread has me looking at stuff I cant afford so I'll just post pics of cool stuff I ran across...
http://i20.photobucket.com/albums/b2...16054e0a6a.jpg
http://i20.photobucket.com/albums/b2...59770jpg_2.jpg

urmyboyblue 07-14-2016 09:43 PM
Re: Turbo gentlmen
 
Look at the 2 latest Hot Rod Garage on YouTube for them installing two different blown LS's. They do look good.

Super73 07-15-2016 03:37 PM
Re: Turbo gentlmen
 
Quote:
Originally Posted by urmyboyblue (Post 7653090)



Plus they are more adjustable than any other power adder.

Hmmm... I can go from 520rwhp to 620rwhp to 690rwhp to 810rwhp to 900rwhp in a matter of minutes with my N20 set up.. I'd call that easy to adjust..

shortbed70 07-15-2016 04:54 PM
Re: Turbo gentlmen
 
Quote:
Originally Posted by Super73 (Post 7654283)
Hmmm... I can go from 520rwhp to 620rwhp to 690rwhp to 810rwhp to 900rwhp in a matter of minutes with my N20 set up.. I'd call that easy to adjust..
Lol that's a good one.... I want to get something to hold togather for your first number...

Super73 07-16-2016 01:41 AM
Re: Turbo gentlmen
 
Quote:
Originally Posted by shortbed70 (Post 7654333)
Lol that's a good one.... I want to get something to hold togather for your first number...
It's not too hard to build a solid trouble free 400" ls motor that will make 500rwhp. I recently did a stock bottom end 5.7 with small 228/236 cam that made 462rwhp @ 5,800rpm with 440ftls of Tq. It just takes a well thought out combo.

moggey01 07-18-2016 11:06 PM
Re: Turbo gentlmen
 
Quote:
Originally Posted by Super73 (Post 7654283)
Hmmm... I can go from 520rwhp to 620rwhp to 690rwhp to 810rwhp to 900rwhp in a matter of minutes with my N20 set up.. I'd call that easy to adjust..
Cheaper also.

tiddlar 07-20-2016 07:54 PM
Re: Turbo gentlmen
 
1 Attachment(s)
Gm LS9 aluminum block, Callies magnum crank, "billet steel Oliver rods" je forged Pistons. The heads seem a bit pricey to me... They are gym but they port them .. Titanium valves. 417 motor sports makes a killer 2000hp intake/intercooler. He has 350 units out with no complaints of heat soak. I'd go with a btr stage 3 turbo cam. This set up is around 17500

tinydb84 07-21-2016 02:12 AM
Re: Turbo gentlmen
 
Lingenfelter is nice but they usually are a bit higher priced for what you get.

TMS has a really good reputation and is probably a better bang for your buck:
http://www.thompsonmotorsports.net/p...roducts_id=240

tiddlar 07-21-2016 01:19 PM
Re: Turbo gentlmen
 
Quote:
Originally Posted by tinydb84 (Post 7660013)
Lingenfelter is nice but they usually are a bit higher priced for what you get.

TMS has a really good reputation and is probably a better bang for your buck:
http://www.thompsonmotorsports.net/p...roducts_id=240
I see I see, gonna have to call and see what they can come up with regarding an ls9. that boostzilla stage 3 looks promising....

tiddlar 07-21-2016 01:20 PM
Re: Turbo gentlmen
 
Quote:
Originally Posted by tinydb84 (Post 7660013)
Lingenfelter is nice but they usually are a bit higher priced for what you get.

TMS has a really good reputation and is probably a better bang for your buck:
http://www.thompsonmotorsports.net/p...roducts_id=240
wonder how their tms crank compares to callied magnum though....

Rannos 07-21-2016 02:37 PM
Re: Turbo gentlmen
 
Not sure what all the sbc hate is about. I been beating on the same pump gas iron headed sbc for 5 years. Never been on a dyno but e.t. to weight says it makes just under 700 rwhp on a 200 shot. Seen more bottles then most kids do growing up and hurt alot of turbo/boosted LS powered cars feelings at the same time. Got less in my entire build then you can get a decent turbo kit for.

I'll be the first to admit the LS is an impressive platform, but don't count out a well thought out and put together sbc or BBC. Bang for your buck you will never compete with either once you get past 700ish hp in my experience. Atleast not and have it survive any length of time.

tiddlar 07-21-2016 03:20 PM
Re: Turbo gentlmen
 
Quote:
Originally Posted by Rannos (Post 7660415)
Not sure what all the sbc hate is about. I been beating on the same pump gas iron headed sbc for 5 years. Never been on a dyno but e.t. to weight says it makes just under 700 rwhp on a 200 shot. Seen more bottles then most kids do growing up and hurt alot of turbo/boosted LS powered cars feelings at the same time. Got less in my entire build then you can get a decent turbo kit for.

I'll be the first to admit the LS is an impressive platform, but don't count out a well thought out and put together sbc or BBC. Bang for your buck you will never compete with either once you get past 700ish hp in my experience. Atleast not and have it survive any length of time.
IM not putting sbc down... just considering all my options..

1Bad72C10 10-20-2018 06:36 PM
Re: Turbo gentlmen
 
Quote:
Originally Posted by tiddlar (Post 7638879)
I guess there is adapter plates that's would make it fit.. I do have a tranny adapter though🤔.
The price seems to be pretty damn close ... This is 30 grand yikes.. 1000 horse supercharged Holley efi... But ouch
Borrowski builds very nice very good qaulity stuff. i just watched them build a twin turbo street ls427 with 88 mm turbos made on a mild tune 2347. they are currently building my 540 tt street motor. i dont want an ls everyone has one these days and nothing spectacular. like steve morris mike moran all say you can have big block power in an ls but you will pay 3 times as much to get it to stay together as well. Mine is for a street cruiser and were trying to keep it hopefully down around 1000 to 1200 whp. and junkyard no way if you're building something really nice. which by the sounds of it you are. but for 700 whp that is very very easy to make being turbo. you can have 1200 to 1500 very streetable daily driver motor. I haul cars for a living and haul them type of cars all the time. even driven a camaro with a 572 twin turbo in it drove just like a normal car until you got into it. the gentleman claimed as long as you dont beat on it all the time would get over 20 mpg's

tiddlar 10-20-2018 07:08 PM
1 Attachment(s)
Quote:
Originally Posted by 1Bad72C10 (Post 8368428)
Borrowski builds very nice very good qaulity stuff. i just watched them build a twin turbo street ls427 with 88 mm turbos made on a mild tune 2347. they are currently building my 540 tt street motor. i dont want an ls everyone has one these days and nothing spectacular. like steve morris mike moran all say you can have big block power in an ls but you will pay 3 times as much to get it to stay together as well. Mine is for a street cruiser and were trying to keep it hopefully down around 1000 to 1200 whp. and junkyard no way if you're building something really nice. which by the sounds of it you are. but for 700 whp that is very very easy to make being turbo. you can have 1200 to 1500 very streetable daily driver motor. I haul cars for a living and haul them type of cars all the time. even driven a camaro with a 572 twin turbo in it drove just like a normal car until you got into it. the gentleman claimed as long as you dont beat on it all the time would get over 20 mpg's
Wow totally forgot about this post. Borowski builds awesome stuff. I ended up going with an rhs502 tall deck ls block. Naturally aspirated with a spit of nitrous.
Posted via Mobile Device

1Bad72C10 10-20-2018 07:15 PM
Re: Turbo gentlmen
 
Quote:
Originally Posted by tiddlar (Post 8368444)
Wow totally forgot about this post. Borowski builds awesome stuff. I ended up going with an rhs502 tall deck ls block. Naturally aspirated with a spit of nitrous.
Posted via Mobile Device
nice my motor is supposed to be done by end of november i will have to post a dyno video of it for you once its done. Good luck on your build

tiddlar 10-20-2018 07:25 PM
Quote:
Originally Posted by 1Bad72C10 (Post 8368448)
nice my motor is supposed to be done by end of november i will have to post a dyno video of it for you once its done. Good luck on your build
O dang they are doing your bbc I see. I would love to see pics and videos. My motor made 869hp and 738 tq n/a.
Posted via Mobile Device


All times are GMT -4. The time now is 06:59 PM.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com