The 1947 - Present Chevrolet & GMC Truck Message Board Network
Page 2 of 6 1 2 3456
Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   OH 72 c30 longhorn parting (https://67-72chevytrucks.com/vboard/showthread.php?t=733702)

Dirt's72 03-26-2017 12:15 AM
Re: 72 c30 longhorn parting
 
Interested in the windshield if original soft ray tint and no cracks if you would ship. Also the fuel line from fuel pump to carb. And ac vent balls if they have nice chrome and windshield washer fluid bracket. Thanks.

Theboatandcarman 03-26-2017 08:54 AM
Re: 72 c30 longhorn parting
 
looking for no spin ho52/ho72 4.10 rear axle center section (i said same on facebook)

jaybatta 03-26-2017 10:43 AM
Re: 72 c30 longhorn parting
 
I think I'm #3 in line for the aux battery tray ando mounting bolts shipped to Livingston mt 59047.
Thanks

Joe

rsmarr1982 03-26-2017 12:40 PM
Re: 72 c30 longhorn parting
 
I'm trying to get as much removed on truck while it's daylight I will respond to everyone tonight.

rsmarr1982 03-26-2017 02:00 PM
Re: 72 c30 longhorn parting
 
Quote:
Originally Posted by Kemp16V (Post 7896533)
Are there any rust holes in the auxiliary battery tray? What are you asking for it?
No rust holes , has fasteners. Just surface email rust asking $100 plus shipping.

rsmarr1982 03-26-2017 02:01 PM
Re: 72 c30 longhorn parting
 
Quote:
Originally Posted by Theboatandcarman (Post 7896756)
looking for no spin ho52/ho72 4.10 rear axle center section (i said same on facebook)
Rear is gone before I posted truck

rsmarr1982 03-26-2017 02:02 PM
Re: 72 c30 longhorn parting
 
Quote:
Originally Posted by Dirt's72 (Post 7896655)
Interested in the windshield if original soft ray tint and no cracks if you would ship. Also the fuel line from fuel pump to carb. And ac vent balls if they have nice chrome and windshield washer fluid bracket. Thanks.
Windshield is cracked. I will take a pic later of vents

rsmarr1982 03-26-2017 02:05 PM
Re: 72 c30 longhorn parting
 
Quote:
Originally Posted by randy500 (Post 7896343)
Does the radio work?
How much for the following
Door Panels
Seat belts if retractor covers are good
Carburetor, can you get the number off it?
A/C brackets
A/c brackets are pending locally. Door panels where sold before posting. Seat belts are missing. Carb is avaliable.

rsmarr1982 03-26-2017 02:06 PM
Re: 72 c30 longhorn parting
 
Quote:
Originally Posted by DeadheadNM (Post 7896648)
Interesed in the ac firewall box w screws etc pending cost and condition including metal backing. Thanks, pete
Are you wanting just the external parts on out side of firewall?

sherm6413 03-26-2017 02:08 PM
Re: 72 c30 longhorn parting
 
windshield trim available? price?

rsmarr1982 03-26-2017 02:09 PM
Re: 72 c30 longhorn parting
 
Quote:
Originally Posted by Dave (Post 7896550)
Getting in line on the aux battery tray with wiring.

Interested in the aux fuel tank cover in the bed and the bed side opening also the dash switch for aux fuel too.

Also interested in the windshield washer brkt on the pass. fender

Lmk prices, thanks.
The inside cover has rust I will remove it tomorrow and see if it use able . Are wanting the filler neck?

rsmarr1982 03-26-2017 02:44 PM
Re: 72 c30 longhorn parting
 
Quote:
Originally Posted by undertaker72 (Post 7896350)
hows the pass front fender I need one that color , is it roached like the driver one
It's trashed

rsmarr1982 03-26-2017 02:45 PM
Re: 72 c30 longhorn parting
 
Quote:
Originally Posted by bulky (Post 7896529)
Hi,

I'd be interested in the parts circled in red in this picture. Along with any hoses & connections attached to them.

Thanks
Make me an offer I guess they are for the air horn

jaybatta 03-26-2017 02:48 PM
Re: 72 c30 longhorn parting
 
Quote:
Originally Posted by rsmarr1982 (Post 7897106)
Make me an offer I guess they are for the air horn
They're cruise control parts

rsmarr1982 03-26-2017 02:52 PM
Re: 72 c30 longhorn parting
 
Quote:
Originally Posted by jaybatta (Post 7897115)
They're cruise control parts
I've never had a truck with cruise but I can tell you that the yellow line goes to a horn on the front crossmember

DeadheadNM 03-26-2017 02:54 PM
Re: 72 c30 longhorn parting
 
Quote:
Originally Posted by rsmarr1982 (Post 7897060)
Are you wanting just the external parts on out side of firewall?
The fiberglass box is mostly what I'm after plus the spring inside the cowl for flapper. The metal on the backside of the fiberglass box can get rusty - curious if solid. Any attachment bolts screws would be helpful. Thanks.

rsmarr1982 03-26-2017 02:56 PM
Re: 72 c30 longhorn parting
 
Quote:
Originally Posted by DeadheadNM (Post 7897125)
The fiberglass box is mostly what I'm after plus the spring inside the cowl for flapper. The metal on the backside of the fiberglass box can get rusty - curious if solid. Any attachment bolts screws would be helpful. Thanks.
Hope your not in a hurry . I will try to get it off this week and check it out. You will be first in line once I find out condition.

Dave 03-26-2017 02:58 PM
Re: 72 c30 longhorn parting
 
Quote:
Originally Posted by rsmarr1982 (Post 7897066)
The inside cover has rust I will remove it tomorrow and see if it use able . Are wanting the filler neck?
Ok lmk on the inside cover. Yes on the outer opening, I need that opening for (patch-in) on the bedside and probably the fill tube if any good. Still need a price on the windshield washer brkt as mentioned in my 1st post.
Thanks

DeadheadNM 03-26-2017 02:58 PM
Re: 72 c30 longhorn parting
 
Quote:
Originally Posted by rsmarr1982 (Post 7897128)
Hope your not in a hurry . I will try to get it off this week and check it out. You will be first in line once I find out condition.
Not in any rush at all thanks. Let me know about the other pieces too when possible. Thanks, Pete

DeadheadNM 03-26-2017 03:02 PM
Re: 72 c30 longhorn parting
 
Also, if that's an air horn and complete in interested in it - lmk when poss. Thanks.

rsmarr1982 03-26-2017 03:59 PM
Re: 72 c30 longhorn parting
 
Quote:
Originally Posted by DeadheadNM (Post 7897131)
Not in any rush at all thanks. Let me know about the other pieces too when possible. Thanks, Pete
Dash pad has a crack in it. Side maker light are beat up pretty good.

rsmarr1982 03-26-2017 04:26 PM
Re: 72 c30 longhorn parting
 
Quote:
Originally Posted by sherm6413 (Post 7896605)
how much for stainless trim on front windshield shipped to 63401? Any dings or dents in it?
in very good condition $150 shipped sound good?

rsmarr1982 03-26-2017 04:48 PM
Re: 72 c30 longhorn parting
 
Engine, carb, alternator and power steering. Pending sale

DeadheadNM 03-26-2017 04:50 PM
Re: 72 c30 longhorn parting
 
Quote:
Originally Posted by rsmarr1982 (Post 7897167)
Dash pad has a crack in it. Side maker light are beat up pretty good.
I'll pass on these then thanks.

If the radiator cap is OEM I'd be interested in that. Also, any nuts bolts screws clips or clamps that come off in disassembly I'd be interested in - can be tossed into a can. Would like the screws for the upper rad mounts and transmission cover particularly.

Kemp16V 03-26-2017 04:52 PM
Re: 72 c30 longhorn parting
 
I will pass on the auxiliary battery tray.

Thanks
Andy


All times are GMT -4. The time now is 07:36 AM.
Page 2 of 6 1 2 3456
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com