![]() |
Re: Any Solutions to 55/56 Hood Oil Canning
apache hoods came with the brace down the center
it still flexes quite a bit anytime you get much over 80 mph :D |
Re: Any Solutions to 55/56 Hood Oil Canning
3 Attachment(s)
Finally was able to install my fix for the hood oil canning. Appreciate everybody's help and ideas. Here's the final solution. Fits right up against the hood, used some dabs of silicon along the way to provide some vibration dampening.
|
Re: Any Solutions to 55/56 Hood Oil Canning
Right on, hopefully what you dabbed between them stays flexable. From the factory they use a soft foam because if what you put "glues" the two together you will end up with a "ghost line" on the top that you will be able to see.
Brian |
Re: Any Solutions to 55/56 Hood Oil Canning
Thanks. It fit really well. Yes the silicon is a soft when cured. Didn't use that much, just enough to eliminate any vibration.
|
Re: Any Solutions to 55/56 Hood Oil Canning
Cool!
Brian |
Re: Any Solutions to 55/56 Hood Oil Canning
Quote:
Jim |
Re: Any Solutions to 55/56 Hood Oil Canning
Quote:
Brian:metal: |
Re: Any Solutions to 55/56 Hood Oil Canning
Quote:
|
All times are GMT -4. The time now is 10:10 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com