The 1947 - Present Chevrolet & GMC Truck Message Board Network

Page 2 of 2

Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)

- - Working on it (https://67-72chevytrucks.com/vboard/showthread.php?t=768098)

62bagger

09-26-2019 08:19 PM

Re: Working on it

2 Attachment(s)

I got the new engine perches for a SBC V8 yesterday. They made a big difference. I was able to get the 3 degree off level and the trans lined up. Thanks for spotting that I had the I6 mounts. The new mounts sit flat on the top of the frame rails without any shims. I just need to drill the mount points on the frame. I did cut the tubular mounts as a test and that would have worked as well but the new mounts do not need me to weld them.
Thanks Jimmy and Captainfab for the information

62bagger

09-26-2019 08:38 PM

Re: Working on it

Slepysal, Once you leave the bay area you will love it! I have room to build a shop. Something I couldn't do in the bay area.

slepysal

09-27-2019 08:41 PM

Re: Working on it

Quote:

Originally Posted by 62bagger (Post 8599863)

Slepysal, Once you leave the bay area you will love it! I have room to build a shop. Something I couldn't do in the bay area.

Thanks Bay Area life is nuts.

All times are GMT -4. The time now is 04:05 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page