Re: 69 suburban parts
 

Dwayne
I will try to get them tested today. I will have to get the wife to come over and see if she hears them, They all sound broke and non working to me :lol:

Richard

Re: 69 suburban parts
 

I have 3 parts rigs here and not one of them has a good rust free mounting lip. You might check with a couple of the west coast guys like Randy500, Budnickguy or Tkorinek

Re: 69 suburban parts
 

Brian,
This is how it was cut. at the price quoted. If I cut this pc of roof skin off on both pcs it will knock about $20 off shipping (black sharpie line I am pointing to in pic)

Let me know which way you would rather it be

Thanks
Richard

Re: 69 suburban parts
 

Payment sent this morning.
Thanks again!

Re: 69 suburban parts
 

That's Funny.
Also do you have any (Plain) 67 radio knobs?
Dwayne

Re: 69 suburban parts
 

Dwayne
The only 67 knobs I have are for the dash as shown

The horns that were on this truck were not correct for these trucks. They both work but the wife says they sound like both low notes and there was no dual harness other than a butchered up mess lol I do have a high low set with harness. The low works but I could not get the high to work. Member ROger Koop rebuilds them if I recall correctly. Let me know if you have any interest in either

The 1st 3 pics are of the h/l setup the last pic is of what came off this truck

Richard

Re: 69 suburban parts
 

Richard
Just checked the 1 horn on my truck.
The horn on my truck is High.(I thought it was Low)
Thanks for Pics of Knobs. I only need the 2 black knobs on radio only.

So How much for your High/Low set You have with the harness.(I would like the high that doesn't work just to compare to mine)

Thanks
Dwayne

Re: 69 suburban parts
 

Dwayne,
I would do $50 shipped for both horns and the harness.

Thanks
Richard

Re: 69 suburban parts
 

I will take them.
Money on the way.

Re: 69 suburban parts
 

Cut right here on both sides ok with me

Re: 69 suburban parts
 

Got your payment and it will ship Monday.

Thanks

Re: 69 suburban parts
 

Ok I will recut and see what size it works down to and get back to you soon

Richard

Re: 69 suburban parts
 

I'm in no hurry, thanks

Re: 69 suburban parts
 

Sorry didnt see your last message until this morning , payment sent .
Thank you,
Brian

Re: 69 suburban parts
 

Brian
Got your payment. I will try to ship today but will most likely be tomorrow

Thanks
Richard

Re: 69 suburban parts
 

The 2nd row floor section I took out in one pc including the rear step brace. Other than surface rust the only bad areas are the inner rockers. I am going to say $300 plus shipping and we can go from there. I left extra front floor material on it so it can be brought back to the factory seam as needed.

.

Re: 69 suburban parts
 

Received both my items..... Great shape just as described and shipping was very timely!! thanks you sir Pleasure doing with business with you....

Steve

Re: 69 suburban parts
 

Good Deal. Glad they made it
Richard

Re: 69 suburban parts
 

Does this still have the dome light mount?

Re: 69 suburban parts
 

Are you looking for the z bracket type used or the fully enclosed one? I might have a z but know I don't have the fully enclosed one
Thanks Richard

Re: 69 suburban parts
 

I don't know, I didn't know there was more than one style available. Let me do some research. If you got a pic I would see if it will work. I am wanting to add one in the back cargo area, so it may not matter.

Re: 69 suburban parts
 

Recieved my parts today thanks appreciate everything!
Thank you
Brian !

Re: 69 suburban parts
 

Bill
If it had a headliner in it it should have the Z bracket style in it like in this pic I still have this one that includes original screws & spacers for $20 shipped

Attachment 1814033


Attachment 1814035



If it did not come with a headliner then it most likely had this style (I already sold this one and have no more at the moment) they were also found in the 67-70 panel trucks. The bracket is the green one sitting beside the dome light in this pic

Attachment 1814034

Re: 69 suburban parts
 

Brian
Thanks for letting me know you got them ok.

Richard

Re: 69 suburban parts
 

Thanks for the pictures, it has the second style. I am going to keep an eye out for one to match, but if no luck shortly may take you up on the other one.