The 1947 - Present Chevrolet & GMC Truck Message Board Network
Page 2 of 10 1 2 34567 Last »
Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Blazer and Suburban Stuff (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=199)
-   -   PA 72 blazer 4-spd CST part out (https://67-72chevytrucks.com/vboard/showthread.php?t=784007)

1rippen6 03-27-2019 10:59 AM
Re: 72 blazer 4-spd CST part out
 
Quote:
Originally Posted by Big Al 1972 (Post 8495504)
Any good hatch latches or center latch cover?
Not parting the hatch it's in nice shape.

1rippen6 03-27-2019 11:00 AM
Re: 72 blazer 4-spd CST part out
 
Quote:
Originally Posted by 402GMC (Post 8495566)
In line for the skip plate and the spare tire Carrier
Did you want the skid plate and cross member?

1rippen6 03-27-2019 11:00 AM
Re: 72 blazer 4-spd CST part out
 
Quote:
Originally Posted by kv63 (Post 8495524)
Hey Dwayne. I am interested in the two front bolts for the bench seat. Can you take a few pictures if they are available? Thank you.
I don't think they are original.

bmfm64 03-27-2019 11:57 AM
Re: 72 blazer 4-spd CST part out
 
Quote:
Originally Posted by bmfm64 (Post 8495634)
Lower CST brackets for the rear side panels and the brass alignment pieces on the doors?
Any luck on these? Are these the chanels you are talking about or are you talking about the uppers?

1rippen6 03-27-2019 12:24 PM
Re: 72 blazer 4-spd CST part out
 
Quote:
Originally Posted by bmfm64 (Post 8495674)
Any luck on these? Are these the chanels you are talking about or are you talking about the uppers?
CST brackets will go with the channels the pieces on the doors are stainless, do you need them or the brass or both.

bmfm64 03-27-2019 12:51 PM
Re: 72 blazer 4-spd CST part out
 
Quote:
Originally Posted by 1rippen6 (Post 8495695)
CST brackets will go with the channels the pieces on the doors are stainless, do you need them or the brass or both.
Can you post a pic of the lower pieces so I know what I'm looking for? lol. And yes if you have both sides I'd be interested in both the brass and the stainless pieces.

1rippen6 03-27-2019 04:42 PM
Re: 72 blazer 4-spd CST part out
 
Quote:
Originally Posted by bmfm64 (Post 8495716)
Can you post a pic of the lower pieces so I know what I'm looking for? lol. And yes if you have both sides I'd be interested in both the brass and the stainless pieces.
Both sides are there I'll get you some pictures of everything tomorrow

1rippen6 03-27-2019 06:10 PM
Re: 72 blazer 4-spd CST part out
 
3 Attachment(s)
Quote:
Originally Posted by undertaker72 (Post 8495242)
how much for mirrors, spicer hubs and antenna pending cond
Lock out are rough, are you looking for rings and knobs or internals. I have internals already out. Antenna isn't much better, I'll try to pull tomorrow and see if it has any issues.

MikeCofield 03-27-2019 06:54 PM
Re: 72 blazer 4-spd CST part out
 
Still interested in cst upper chrome channels

1rippen6 03-27-2019 08:19 PM
Re: 72 blazer 4-spd CST part out
 
5 Attachment(s)
Quote:
Originally Posted by jimer1964 (Post 8495308)
Dwayne interested in 4speed set up. Does it have the chrome 4 speed shifter?
Tried cleaning up the shifter today, I would say they need a rechromed to be nice.

1rippen6 03-27-2019 08:20 PM
Re: 72 blazer 4-spd CST part out
 
4 Attachment(s)
More

1rippen6 03-27-2019 08:23 PM
Re: 72 blazer 4-spd CST part out
 
Quote:
Originally Posted by Eagle9502 (Post 8495460)
Dwayne, any luck on front bumper brackets and oil dipstick/tube?
Sorry, it only has the one bracket.

1rippen6 03-27-2019 08:29 PM
Re: 72 blazer 4-spd CST part out
 
5 Attachment(s)
Quote:
Originally Posted by 402GMC (Post 8495566)
In line for the skip plate and the spare tire Carrier
Fine tread bolt is junk but I'll throw a couple new ones in. The only other thing is the spring that keeps the latch down is gone, I'm assuming rusted off lol. Let me know if you need anymore pictures.

jimer1964 03-27-2019 09:13 PM
Re: 72 blazer 4-spd CST part out
 
Quote:
Originally Posted by 1rippen6 (Post 8495980)
Tried cleaning up the shifter today, I would say they need a rechromed to be nice.
Dwayne, Thanks for the photos I will pass at this time.

1rippen6 03-27-2019 09:19 PM
Re: 72 blazer 4-spd CST part out
 
Quote:
Originally Posted by jimer1964 (Post 8496016)
Dwayne, Thanks for the photos I will pass at this time.
No problem, thanks for letting me know.

Chad Alder 03-28-2019 12:52 AM
Re: 72 blazer 4-spd CST part out
 
Converting auto to manual on my 1970 Jimmy.

What is the price for a package that includes from steering wheel to drive shafts shipped to 80126?

Chad

CHEVY_DUDE 03-28-2019 05:16 AM
Re: 72 blazer 4-spd CST part out
 
Stainless single wall top hold down trim? Hatch latch brackets?

Chad Alder 03-28-2019 10:33 AM
Re: 72 blazer 4-spd CST part out
 
Quote:
Originally Posted by Chad Alder (Post 8496137)
Converting auto to manual on my 1970 Jimmy.

What is the price for a package that includes from steering wheel to drive shafts shipped to 80126?

Chad
Scratch that question. Please let me know if are interested in selling pieces rather than as a full set. I have pedals, tranny and transfer case already. Interested in cost for the rest if you go that direction.

Thanks!

Chad

1rippen6 03-28-2019 10:35 AM
Re: 72 blazer 4-spd CST part out
 
Quote:
Originally Posted by Chad Alder (Post 8496309)
Scratch that question. Please let me know if are interested in selling pieces rather than as a full set. I have pedals, tranny and transfer case already. Interested in cost for the rest if you go that direction.

Thanks!

Chad
Will do

mgkgmc 03-28-2019 05:37 PM
Re: 72 blazer 4-spd CST part out
 
Selling the roof rack? do you have any better pictures?

1rippen6 03-28-2019 05:45 PM
Re: 72 blazer 4-spd CST part out
 
Quote:
Originally Posted by mgkgmc (Post 8496583)
Selling the roof rack? do you have any better pictures?
Yes, I'll get some better pictures tomorrow.

1rippen6 03-28-2019 05:46 PM
Re: 72 blazer 4-spd CST part out
 
Quote:
Originally Posted by jimmy70 (Post 8495254)
I'll take the t case skid plate with hardware pending a few pix for $125 shipped to 48092 if interested. Thx
I can do 135 plus pp fees let me know if still interested.

jondancer 03-28-2019 06:04 PM
Re: 72 blazer 4-spd CST part out
 
Any front seat belts ? What color ?

1rippen6 03-28-2019 07:57 PM
Re: 72 blazer 4-spd CST part out
 
Quote:
Originally Posted by jondancer (Post 8496598)
Any front seat belts ? What color ?
Sorry, all the belts were gone.

1rippen6 03-28-2019 07:58 PM
Re: 72 blazer 4-spd CST part out
 
Quote:
Originally Posted by CHEVY_DUDE (Post 8496165)
Stainless single wall top hold down trim? Hatch latch brackets?
Strips are there let me get them off and check condition.


All times are GMT -4. The time now is 12:36 AM.
Page 2 of 10 1 2 34567 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com