The 1947 - Present Chevrolet & GMC Truck Message Board Network

Page 2 of 2

Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- Paint & Bodywork (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=16)

- - Mig welding wire (https://67-72chevytrucks.com/vboard/showthread.php?t=784566)

Getter-Done

05-14-2019 11:17 PM

Re: Mig welding wire

KMC3420
Thanks for starting this thread.
It's positive and already
has lots of Valuable info.

KMC3420

05-15-2019 09:51 AM

Re: Mig welding wire

Quote:

Originally Posted by Getter-Done (Post 8525787)

KMC3420
Thanks for starting this thread.
It's positive and already
has lots of Valuable info.

You bet! Just here to learn in the quest to put another c10 back on the road.

jfnar

05-31-2019 04:17 PM

Re: Mig welding wire

In the case of the pictures shown in post #17, is the welding all done at this point or will you continue to fill in the gaps between dots? Thanks.

KMC3420

05-31-2019 10:56 PM

Re: Mig welding wire

Quote:

Originally Posted by jfnar (Post 8534693)

In the case of the pictures shown in post #17, is the welding all done at this point or will you continue to fill in the gaps between dots? Thanks.

The seam will be 100% welded by adding weld dots until there is no longer an unwelded spot. You will overlap the new weld dots onto the previous by a 1/2 or 1/3 to ensure complete coverage.

All times are GMT -4. The time now is 02:02 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page