The 1947 - Present Chevrolet & GMC Truck Message Board Network
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Tools, Shops and Shop Safety (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=89)
-   -   What is it....tool time (https://67-72chevytrucks.com/vboard/showthread.php?t=793412)

Ol Blue K20 09-15-2019 10:20 AM
Re: What is it....tool time
 
Quote:
Originally Posted by Jrainman (Post 8593735)
OK I have no Idea what that tool is but will follow here to find out , but for me more importantly is never new Willams is a divison of Snap on,Now I no why the only 1/2 drive rachet I have never broke is my old trusty Willams rachet , and I have stripped the gears in plenty othes even snapped a few breaker bars .not trying to hi jack the thread here .
If you do happen to break it. Repair kits are available. Definitely a good tool.

Andy4639 09-15-2019 10:40 AM
Re: What is it....tool time
 
And the answer is.......

OK, I'll wait until this afternoon to say!:lol::lol::lol:

Getter-Done 09-15-2019 10:51 AM
Re: What is it....tool time
 
Tuned in for the answer:chevy:









.

Ol Blue K20 09-15-2019 11:09 AM
Re: What is it....tool time
 
Quote:
Originally Posted by Andy4639 (Post 8593772)
And the answer is.......

OK, I'll wait until this afternoon to say!:lol::lol::lol:
AARRGGGGHHHHH!!!!! what a tease...:lol::lol:

Axle 09-15-2019 12:26 PM
Re: What is it....tool time
 
Quote:
Originally Posted by Andy4639 (Post 8593772)
And the answer is.......

OK, I'll wait until this afternoon to say!:lol::lol::lol:
If this turns into another safe thread, :cuss: we are going to find you. :sumo: :chop:
=-)

Andy4639 09-15-2019 03:50 PM
Re: What is it....tool time
 
Ok guy's here it is.

The tool was issued only to the production line workers who bleed the brakes on the new vehicles as they rolled down the line.

The tool is a Proportional valve tool. It keeps the plunger from moving while they bleed the brakes as it moved down the line. It held the plunger in the center of the proportional valve. I have never seen one until this one. My friend gave it to me as a gift. So now you know the rest of the story! :chevy:

:metal::metal::metal::metal:

Ol Blue K20 09-15-2019 06:21 PM
Re: What is it....tool time
 
That's interesting. That tool would come handy in the public domain as well

68C15 09-15-2019 07:54 PM
Re: What is it....tool time
 
I can kind of seeing it work. I have the modern version, actually 4 of them.

Did someone loose their job over that tool disappearing?

Andy4639 09-15-2019 08:03 PM
Re: What is it....tool time
 
Quote:
Originally Posted by 68C15 (Post 8594054)
I can kind of seeing it work. I have the modern version, actually 4 of them.

Did someone loose their job over that tool disappearing?
I don't know if anybody did are not but I bet whoever lost it was pissed!:chevy:

special-K 09-16-2019 07:32 AM
Re: What is it....tool time
 
Quote:
Originally Posted by Andy4639 (Post 8593912)
Ok guy's here it is.

The tool was issued only to the production line workers who bleed the brakes on the new vehicles as they rolled down the line.

The tool is a Proportional valve tool. It keeps the plunger from moving while they bleed the brakes as it moved down the line. It held the plunger in the center of the proportional valve. I have never seen one until this one. My friend gave it to me as a gift. So now you know the rest of the story! :chevy:

:metal::metal::metal::metal:
Yes Andy, that is the correct answer :lol: :lol: :lol:


All times are GMT -4. The time now is 02:20 PM.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com