Re: Project "Pandemic" 1927 Chevy Capitol
 

Attachment 2095219

Attachment 2095220

Attachment 2095221

Re: Project "Pandemic" 1927 Chevy Capitol
 

I have now nailed down a power plant for my truck. Its a 2007 5.3l from a Tahoe. It is supposed to be a 320 horse 340 torque motor with only 102,000 miles. Comes with all the accessories and wires. Getting it tomorrow! I traded a 1940 Ford Cab and 1988 Ranger frame for it. He says he is getting a 4l80 to go with it but we will see.

Re: Project "Pandemic" 1927 Chevy Capitol
 

Update:

Recently received my 5.3l looks like everything is all there, still awaiting the 4l60e, but he hasn't picked up the '40 Ford yet so no worries yet.

Did some modifications to the top of my doors. The way we had welded them up did not take in consideration for the top of the frame meeting the roof line.

I also went to a swap meet last Sunday, Sold some extra stuff and found some good deals as well.

$20-used plastic gas tank
$20-2 different, never used frame mounted brake assemblies
$20-4 1927 Missouri License Plates - 2 are matching plates
$20- 2 Model A radius rods
$20- T-Bucket windshield frame that was the exact size i needed

Pictures coming soon!

Re: Project "Pandemic" 1927 Chevy Capitol
 

Attachment 2100249

Attachment 2100250

Attachment 2100251

Attachment 2100252

Attachment 2100253

Re: Project "Pandemic" 1927 Chevy Capitol
 

Attachment 2100254

Attachment 2100255

Attachment 2100256

Attachment 2100257

Attachment 2100258

Re: Project "Pandemic" 1927 Chevy Capitol
 

Attachment 2100259

Attachment 2100260

Re: Project "Pandemic" 1927 Chevy Capitol
 

Attachment 2167657

Attachment 2167661

Attachment 2167662

Attachment 2167663

Attachment 2167664

All the pcs of my frame are cut from 2x3 tubing. I have the 30 Model A front frame horns and crossmember cleaned up and ready to weld on along with the rear cross member both pieces were taken from the frame that came with the the project. Hopefully I will get these pieces welded up soon and can move forward with making a rolling chassis.

Project "Pandemic" 1927 Chevy Capitol
 

I like what I see so far .

:chevy:

Re: Project "Pandemic" 1927 Chevy Capitol
 

x2

Re: Project "Pandemic" 1927 Chevy Capitol
 

Attachment 2172997

Attachment 2172998

Attachment 2172999

Attachment 2173000

Attachment 2173001

So I have been depending on a friend to do my welding. After a few no shows I decided it was time to bite the bullet and do my own welding. So here are the pics of my first time welding. I have both frame rails from the front of the cab to the back of the bed completed. I have welded the new frame rails to the Model A front crossmember and frame horns. I set the width on the frame rails with a makeshift frame table and lots and lots of measuring and tacked them in place for the rest of the crossmembers to be cut and welded in. It is all built out of 2x3 tubing cut with a chop saw and welded with a 110v gasless wire feed welder. I still have a lot of grinding to do but have impressed my self with how it is coming out. Hopefully it will be a rolling frame soon.

Re: Project "Pandemic" 1927 Chevy Capitol
 

So a little update, after sending some pics to a buddy he said my frame needed some serious upgrading to be safer. So I tore the frame down got some more metal and am almost done building a better frame so hopefully some pics coming soon.

Re: Project "Pandemic" 1927 Chevy Capitol
 

Attachment 2185554

Here is an in progress pic of the frame still alot of work to do on it but it is defiantly much stronger.

Re: Project "Pandemic" 1927 Chevy Capitol
 

Here are some updated pics frame is mostly complete, i was able to roll it outside and take a better look at it and Got my motor tore down and built a wood frame for the roof

Re: Project "Pandemic" 1927 Chevy Capitol
 

It's coming along.

Re: Project "Pandemic" 1927 Chevy Capitol
 

Built a flat bed along with stake sides all from some 100 year old barn wood, hope to get the suspension finished up this week.

Re: Project "Pandemic" 1927 Chevy Capitol
 

flips for you ...

Re: Project "Pandemic" 1927 Chevy Capitol
 

nice progress!

Re: Project "Pandemic" 1927 Chevy Capitol
 

Set up the motor mounts. 5.3 LS i think i am going to do a carb setup instead of the factory intake.

Re: Project "Pandemic" 1927 Chevy Capitol
 

So lots of pics to add since the last post...

Re: Project "Pandemic" 1927 Chevy Capitol
 

Barn wood floor boards with tractor seats, old barn metal for a center console, made a bracket to mount the '50 chevy truck steering box, and last pic is the bearing i made to center the steering shaft in the column.

Re: Project "Pandemic" 1927 Chevy Capitol
 

1st time outside in quite awhile, the other pics are the changes made to the pitman arm.

Re: Project "Pandemic" 1927 Chevy Capitol
 

Took the rat rod out to a cruise on the back of a trailer and was awarded the Club that put on the event's top pick.

Re: Project "Pandemic" 1927 Chevy Capitol
 

So i am using a 1930 model a front axle, spindle, spring, and drag links. Speedway does not sell a disk brake kit for this spindle. So i ordered a 37-48 ford kit and was able to modify it to work by using a 1/2" spacer behind the bearing adapter, moving the caliper to in front of the axle, and opening up 2 out of the 3 mounting holes for the caliper bracket.

Progress !
 

Excellent .

Please keep on with the pictures and explanations of how & why you're doing it .

Re: Project "Pandemic" 1927 Chevy Capitol
 

Attachment 2249064

Attachment 2249065

Attachment 2249066

Pictures of how I had to modify the disk brake bracket to fit the 1930 Model A spindle, the spacer that needed bored out to a larger size and the final product.

The calipers had to go to in front of the axel due to the steering arm.