The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   All 4x4 Tech & Off Roading (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=30)
-   -   1959 GMC Fleet - 2wd to 4wd (https://67-72chevytrucks.com/vboard/showthread.php?t=808297)

Ol Blue K20 02-12-2021 01:00 PM

Re: 1959 GMC Fleet - 2wd to 4wd
 
It looks good.I can't wait to see it unmasked:metal:

dennislbrooks 03-22-2021 02:53 PM

Re: 1959 GMC Fleet - 2wd to 4wd
 
2 Attachment(s)
Someone asked me if my new speedo for the 59 GMC worked ok, It does, an expensive little dude but I had to have one.

Other, a little more progress on the 59. I did paint the left door but did it off the truck at a 45 degree angle ---- nope -- metallic lays different so I will repaint it sometime on the truck.

dennislbrooks 04-03-2021 06:20 AM

Re: 1959 GMC Fleet - 2wd to 4wd
 
2 Attachment(s)
Interior has moved forward. I have extra green carpet that I can still convert some seat panels to the green carpet. I have the bottom of the dash to finish in satin black and the steering wheel needs restored then also painted. The molded carpet came from ACC out of SC/GA/AL and has the matte backing - they did a nice job.

dennislbrooks 12-28-2021 08:38 AM

Re: 1959 GMC Fleet - 2wd to 4wd
 
1 Attachment(s)
Change the front look a little. - just paint

1968 K20 12-29-2021 02:08 PM

Re: 1959 GMC Fleet - 2wd to 4wd
 
Really like everything about your truck. Cant wait to see it finished. Nice Job

dennislbrooks 12-30-2021 08:14 AM

Re: 1959 GMC Fleet - 2wd to 4wd
 
4 Attachment(s)
I did change the 250 I6 for a 350. The trans and transfer case had to move forward 1.5 inches. I had to get a long yoke for the rear driveshaft. The front driveshaft is ok. This moved some weight forward so I resolved it the same as I had the 67 when I put the bbc in.

The six had been rebuilt in its life and could still be a good engine but I think it needs a new or good cam with lifters. Those parts cost new over $300. If someone took out a good cam for a 250 I6, I would be interested.

burnin oil 12-31-2021 02:23 AM

Re: 1959 GMC Fleet - 2wd to 4wd
 
If you want to come get it I will give you a 250 from a parts truck. Carb is toast so no idea how well it runs

dennislbrooks 12-31-2021 06:05 AM

Re: 1959 GMC Fleet - 2wd to 4wd
 
I take eastern TN may be toward Knoxville. I do occasionally make it that direction when I visit my daughter in Atlanta. I would buy just a good used cam if I found one. Maybe someday. 8-)

burnin oil 01-01-2022 12:09 AM

Re: 1959 GMC Fleet - 2wd to 4wd
 
You guessed right but I am a good bit north.


All times are GMT -4. The time now is 12:47 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com