The 1947 - Present Chevrolet & GMC Truck Message Board Network
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Alternate Tinkerings (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=140)
-   -   88 Jeep Wrangler re-power (https://67-72chevytrucks.com/vboard/showthread.php?t=808534)

mongocanfly 07-02-2020 03:55 PM
Re: 88 Jeep Wrangler re-power
 
1 Attachment(s)
I turn some people's pics right side up and save them, and when I repost them they turn sideways again..I've found if I have the pic pulled up in paint where it has the grids, I can move the sides in a tiny bit and hit save and they stay upright
Your orig pic

mongocanfly 07-02-2020 04:01 PM
Re: 88 Jeep Wrangler re-power
 
1 Attachment(s)
You can see how I clipped the edges off

swissarmychainsaw 07-02-2020 09:21 PM
Re: 88 Jeep Wrangler re-power
 
Looking good!

KShortell 07-17-2020 10:30 AM
Re: 88 Jeep Wrangler re-power
 
Cool! I'm a Jeeper, too. I had to pull my Jeep engine last year for a rebuild as well. I even rebuilt another Jeep into a decent rig for my wife. Jeeps are indeed addicting!

chebyshortbox65 09-09-2020 04:20 PM
Re: 88 Jeep Wrangler re-power
 
Did you replace the boost valve? When I used the bow tie over drive kit I had to replace the boost valve

BlueJeep 09-09-2020 05:02 PM
Re: 88 Jeep Wrangler re-power
 
Quote:
Originally Posted by chebyshortbox65 (Post 8805593)
Did you replace the boost valve? When I used the bow tie over drive kit I had to replace the boost valve
I replaced the spring with the one they provided, yes, and wonder if that may be the source of the terrible shifting....as the transmission used to shift fine.


All times are GMT -4. The time now is 01:35 AM.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com