Re: 70 C10 One Piece at a Time
Excited to see how you do! Sadly, those pillars and floor look very typical for most of these trucks. One day and one step at a time!
|
Re: 70 C10 One Piece at a Time
Quote:
|
Re: 70 C10 One Piece at a Time
Job well done, so far!!!
I’m with you, concerning keeping it road worthy, and working on it when possible!!! My welding skills and yours are similar! Tell me some time what you have your welder settings on, and type of welder, if possible! Thanks! Jeff |
Re: 70 C10 One Piece at a Time
Quote:
|
Re: 70 C10 One Piece at a Time
2 Attachment(s)
Not much progress to report. Pics look about the same as last time but there is a lot more weld and grind filling all the pinholes which are pretty much taken care of now. Been working on planishing the weld joint to get the grinding smoother without thinning the surrounding metal too much. Getting a bit repetitive so will move on to fitting up some of the other repairs.
|
Re: 70 C10 One Piece at a Time
1 Attachment(s)
Hmm truck has become a bit of a junk collector in the garage.
|
Re: 70 C10 One Piece at a Time
2 Attachment(s)
But the family was out of town for a week so I decided to turn some attention back towards it. Finished up welding the cab mount as well as fitting and welding the lower A-pillar and inner rocker. Didn't really want to lap the inner rocker but the metal was really thin at the cut a previous owner had made, I didn't have a great patch panel, and I wanted to leave as much original metal as possible. I will seam seal joints and let it drain out the bottom.
|
Re: 70 C10 One Piece at a Time
Solid start, good progress!
|
Re: 70 C10 One Piece at a Time
1 Attachment(s)
Well that fell apart. Life happened and I didn't touch the truck for about a year and a half so I decided it was time to get back to it.
Fit the outer rocker. |
Re: 70 C10 One Piece at a Time
2 Attachment(s)
View of the cab support I replaced.
Also replaced nearly every brake line in the truck after having one fail while I was troubleshooting the brake lights so it has all new hoses and hard lines under the truck. I'm stubborn so I hand bent them rather than buying a pre bent kit. I also picked up a vacuum bleeder and wow I have been wasting so much time not using one over the years. :metal: |
Re: 70 C10 One Piece at a Time
1 Attachment(s)
Then I basically got the truck back to road worthiness without taking a single pic, oops. I have been daily driving it for a few weeks and waiting for a new radiator as this one leaks about a liter per day.
|
All times are GMT -4. The time now is 10:16 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com