Re: thinking about getting this in the morning
1 Attachment(s)
removed the windows and all the rubbers then sanded the top and painted it satin white. not as grey as it looks in the picture I also installed new felt to the rear of the cap now to take the side windows apart and see why they were caulked shut! LOL
|
Re: thinking about getting this in the morning
Someone here was looking for the felts/seals to rebuild the slider windows not too long ago, I don't think they ever found them. There's no kit I'm aware of anyway. Not to say it can't be done, but you'll probably have to source universal felts to find some that fit.
|
Re: thinking about getting this in the morning
thank you i will pull them apart and see what's going on with them i may also need a new tailgate and window the old one is pretty roached out
I ordered 75 sq feet of peel and stick sound/heat deadener to install before i put the new carpets in I'm guessing those nasty old carpets are holding all kinds of funk in them! |
Re: thinking about getting this in the morning
4 Attachment(s)
my mechanic is rebuilding the rear brakes and installing the new shocks, radiator and steering components so while it is away at the shop i have had a chance to work on the cap and sliders. The side windows were full of clear caulk so once i managed to clean it all out the windows are actually in good working order. the felt in the channels are nothing special. I believe any that will fit into a 3/4" x 3/4" channel will work. tough part may be finding them 8 feet long
|
Re: thinking about getting this in the morning
found some rust holes in the original muffler so i decided to change from the exhaust manifolds back and eliminate the catalytic convertor and go to a 3" single set up with a decent high flow muffler and keep the tail pipe in the same location coming out behind the rear tire to the side instead of duals coming out the back like you typically see I hate when you are hooking up a trailer and the exhaust is shooting straight in your face! LOL
|
Re: thinking about getting this in the morning
2 Attachment(s)
picked up a set of seats this morning off craigslist out of a cooper mini 2 door the passenger seat kicks all the way forward to allow access to the rear seat and there is a vertical adjustment on the seats so i am not worried about getting the height correct as long as i don't go too high. I guess the easiest way to make mounts is to use the brackets from the old seats?
100 sq feet of sound deadener was almost enough to do everything came up a little sort on the rear sides behind the panels |
Re: thinking about getting this in the morning
Damn, those seats are gonna look good mounted.
|
Re: thinking about getting this in the morning
When I read your post on my phone and you mentioned seats from another vehicle...I was thinking hmmmmm......
Now that I see them on my monitor screen, I'll have to admit, they look very nice! For some reason, they look pretty cool and not odd looking (as others have done on these trucks). I'm no fab expert but I would try and fit those seat mounts to your existing seat brackets. That would be nice and get you pretty close on the height. |
Re: thinking about getting this in the morning
Quote:
|
Re: thinking about getting this in the morning
1 Attachment(s)
thinking about going with this color scheme love the visor !!
|
Re: thinking about getting this in the morning
2 Attachment(s)
Got my back seat back from the upholstery shop. Did a nice job matching the front seats I didn't want to go crazy with the diamond stitching.
|
Re: thinking about getting this in the morning
Do you have the rear shoulder seatbelt?
|
Re: thinking about getting this in the morning
Quote:
|
Re: thinking about getting this in the morning
2 Attachment(s)
truck has been sitting at a friends shop to get a few spots massaged and take care of the rust i found on the roof. sat for 3 weeks until the last few days it got rolled in and the works has begun door got adjusted tailgate dent straightened out and pulled a few more parts off
|
Re: thinking about getting this in the morning
Looking good.
|
Re: thinking about getting this in the morning
Quote:
i never know if it's going to have paint on it or not when i swing by to visit yesterday i spent a little time taking off parts here and there i stripped out the rear window regulator and the power window switch thank goodness for LMC looks like the only thing worth saving is the regulator itself nothing looks too expensive until you start adding it all up of course jeez louise |
Re: thinking about getting this in the morning
2 Attachment(s)
couple pics while i was there the grill and surround needs replaced how hard is it to swap out a to a different year setup at this point ??
|
Re: thinking about getting this in the morning
Different color? I believe the quad-headlight setup uses a different core support.
|
Quote:
Posted via Mobile Device |
Re: thinking about getting this in the morning
I was shopping rattletrap last night. How much did it take to do the floors?
|
Re: thinking about getting this in the morning
Quote:
|
Re: thinking about getting this in the morning
5 Attachment(s)
making progress
|
Re: thinking about getting this in the morning
4 Attachment(s)
gathering up a few parts
|
Re: thinking about getting this in the morning
4 Attachment(s)
welding done only rust on the whole truck was in the roof
|
Re: thinking about getting this in the morning
2 Attachment(s)
po hacked the dash so i want to go back to the way it was
|
Re: thinking about getting this in the morning
does anyone know where to get a new rear window switch? mines roached lol
|
Re: thinking about getting this in the morning
Those weren't reproduced anywhere last I heard.
|
Re: thinking about getting this in the morning
Quote:
$50-$100 new http://www.ebay.com/itm/NOS-81-91-K5...p2047675.l2557 |
Re: thinking about getting this in the morning
4 Attachment(s)
making progress
|
Re: thinking about getting this in the morning
Sweet. They do like to rust on the side where the half-cab meets the bed rail, first one I've seen that rusted higher up on the cab first.
|
Quote:
Posted via Mobile Device |
Re: thinking about getting this in the morning
That makes sense, I've never seen one rust in that spot only before.
|
Re: thinking about getting this in the morning
1 Attachment(s)
got the new mirrors mounted and the sun visor really impressed how nice the Summit sun visor is perfect fit too
trying to get primer on her tomorrow |
Re: thinking about getting this in the morning
2 Attachment(s)
here are a few more pics from today
|
Re: thinking about getting this in the morning
2 Attachment(s)
only let's me upload a couple at a time
|
Re: thinking about getting this in the morning
You found a NOS hood ornament?
|
Re: thinking about getting this in the morning
Just thought you might be tempted with some billet door handles....
https://www.gsimfab.com/73-87-billet...4257_8769.html https://www.gsimfab.com/uimages/prod..._Buttons_b.jpg |
Re: thinking about getting this in the morning
2 Attachment(s)
finally sprayed some primer last night!
|
Re: thinking about getting this in the morning
2 Attachment(s)
a couple more pics not sure why but the system only allows me to upload a couple at a time
|
Re: thinking about getting this in the morning
2 Attachment(s)
couple more pics
|
All times are GMT -4. The time now is 10:59 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com