Re: Valentines SPECIAL 67-72 PARTS ALOT of them
Woodgrain glove box doors? The toolbox door have any useable parts on it?
|
Re: Valentines SPECIAL 67-72 PARTS ALOT of them
Jeff, not quite heaven but close, just kidding
Eric, $50 each, one of them the aluminum is bowed someone tried to pull it off door, I bought it that way off here. No toolbox door has not got much Thanks Randy |
Re: Valentines SPECIAL 67-72 PARTS ALOT of them
Hi will you ship inner fender if so can you get some pics of the best right side one you have and price 84003
|
Re: Valentines SPECIAL 67-72 PARTS ALOT of them
Any rust free 69-72 chevy radiator supports. If so how much shipped to 05478
Posted via Mobile Device |
Re: Valentines SPECIAL 67-72 PARTS ALOT of them
Randy,
Any nice black floor shift columns? Also any 16" 6 lug rims? Also looking for white 3/4 hubcaps ;) Looks like you've really stocked up since my last visit! Those parts bins are fillin up. |
Re: Valentines SPECIAL 67-72 PARTS ALOT of them
Ill take the sway bar and lower shaft and the carb in the last pic in post 18 the one in the middle of the pic can u turn it over and take a pic Randy am I right about needing that lower shaft when doing Manuel to P S conversion and will u include the brackets that hold the sway to the frame as mine was not equipped originally
Quote:
|
Re: Valentines SPECIAL 67-72 PARTS ALOT of them
i could use some pieces for a stock sliding window if those are stock. there is a finish on either side of the small sliders - not the latch side - will you part them or just whole assembly . thanks
|
Re: Valentines SPECIAL 67-72 PARTS ALOT of them
Reeds72, sorry I don't ship inner fenders
rochlow, the rad supports I have have some light rust in pass tray Jud, I have a couple floor shift columns but they would need paint. No 16 inch wheels right now, sold the ones I had. Oh ya hubcaps;) yes I need to do some sorting, its kind of mess out there Jess, I'll get pics of carb. On the shaft, if you have a one piece column, what I mean is a solid column from top to steering box, you'll need the shaft. Yes brackets come with sway bars Thanks Randy |
Re: Valentines SPECIAL 67-72 PARTS ALOT of them
blazer top and back hatches? passenger side fender with no rust?
|
Re: Valentines SPECIAL 67-72 PARTS ALOT of them
Kelly, I think they are both aftermarket, but I only sell sliders complete anyway. Thanks Randy
|
Re: Valentines SPECIAL 67-72 PARTS ALOT of them
Randy, do you have a rust-free ball bearing ashtray? If so, how much shipped to 95357. Thanks,
Richard |
Re: Valentines SPECIAL 67-72 PARTS ALOT of them
Randy, needing paint is ok, any that don't need rebuilding? Price either way picked up. Thanks,
|
Re: Valentines SPECIAL 67-72 PARTS ALOT of them
woodymm3, I don't have any real good pass fenders. Blazer top is sold. I have some hatches but they would need some work. Thanks Randy
|
Re: Valentines SPECIAL 67-72 PARTS ALOT of them
Light rust is ok.. As long as not rotted through
Posted via Mobile Device |
Re: Valentines SPECIAL 67-72 PARTS ALOT of them
Richard, I should have, I will get pics of the best one I have
Jud, I'll check them out Rochlow, they are rusted through a little if I remember right Thanks Randy |
Re: Valentines SPECIAL 67-72 PARTS ALOT of them
I'll send MO out on bar and shaft tomorrow
Thanks Jess QUOTE=teeitup;5175856]Reeds72, sorry I don't ship inner fenders rochlow, the rad supports I have have some light rust in pass tray Jud, I have a couple floor shift columns but they would need paint. No 16 inch wheels right now, sold the ones I had. Oh ya hubcaps;) yes I need to do some sorting, its kind of mess out there Jess, I'll get pics of carb. On the shaft, if you have a one piece column, what I mean is a solid column from top to steering box, you'll need the shaft. Yes brackets come with sway bars Thanks Randy[/QUOTE] Posted via Mobile Device |
Re: Valentines SPECIAL 67-72 PARTS ALOT of them
Quote:
-Richard |
Re: Valentines SPECIAL 67-72 PARTS ALOT of them
Jess, if you want to wait till I get pics of carb, thats would be fine with me. I'll hold the sway bar and shaft for you.
Thanks Randy |
Re: Valentines SPECIAL 67-72 PARTS ALOT of them
Randy do u have any pulleys looking for a complete setup crank and water pump with ps and ac
Posted via Mobile Device |
Re: Valentines SPECIAL 67-72 PARTS ALOT of them
Dave, only for a BB no SB ones, Sorry, Thanks Randy
|
Re: Valentines SPECIAL 67-72 PARTS ALOT of them
I want this If avaliable;
Battery hold down chrome lighter socket (dont need element) 67 ash tray (blue if poss ) reverse lenses taillight lenses The blue glove box in post 17 w/emblem Let me know what you got, Please |
Re: Valentines SPECIAL 67-72 PARTS ALOT of them
Randy, I am interested in the glove box door and ash tray from the eagle truck and also the seat belt retractors from that truck. I have been waiting for a thread on that truck but these holiday specials get a ton of views for you so this is better. Thanks Bobby
|
Re: Valentines SPECIAL 67-72 PARTS ALOT of them
Tooter,
bat holddown $3 female chrome lighter $3 not sure what color 67 ashtrays I have $12 for one reverse lens have to look to see if any good ones same with the taillight lens blue glove box door $20 Thanks Randy |
Re: Valentines SPECIAL 67-72 PARTS ALOT of them
Bobby, glove box door from eagle, I'm keeping. I already have a buyer from a couple weeks ago for the door panels and seat belts and visors out of the eagle truck, sorry. Thanks Randy
|
Re: Valentines SPECIAL 67-72 PARTS ALOT of them
I will take those too.. Thanks
|
Re: Valentines SPECIAL 67-72 PARTS ALOT of them
Ok thank you Randy
Quote:
|
Re: Valentines SPECIAL 67-72 PARTS ALOT of them
Hey Randy I'm looking for a driver side door, a 69-72 hood and pass inner fender, Thanks Brad.
|
Re: Valentines SPECIAL 67-72 PARTS ALOT of them
tooter, sounds good
Zicc, I'll have pics tomorrow 68chevyboy, Brad, Not sure what i have out there in hoods, will look. If I don't have one now I will have one on a truck thats coming in. I only have one decent drivers door, and it has a dent on inner rear corner, looks like someone backed into something with door open. I'll have to look on inners, I think I have one decent pass side one Thanks Randy |
Re: Valentines SPECIAL 67-72 PARTS ALOT of them
Randy,
How much for the two pieces circled in the picture below shipped to 73012. Thanks |
Re: Valentines SPECIAL 67-72 PARTS ALOT of them
How much for the driver side door ? The inner fenders can have some rust price is more the issue.
|
Re: Valentines SPECIAL 67-72 PARTS ALOT of them
Quote:
http://i284.photobucket.com/albums/l..._photo/cm3.jpg |
Re: Valentines SPECIAL 67-72 PARTS ALOT of them
Crash OK, Mark, would rather not split them apart right now, sorry
68chevyboy, Brad, $30 for door, no wing window in it has a big ole mirror on it, came off a 1 ton truck. If I have a pass inner with a little rust probably $20. Hood would be $20 too. Thanks Randy |
Re: Valentines SPECIAL 67-72 PARTS ALOT of them
Quote:
Thanks |
Re: Valentines SPECIAL 67-72 PARTS ALOT of them
Sounds great Randy I'll be in Kc next week for classes I'll get with you sometime next week to pick them up Thanks Brad.
|
Re: Valentines SPECIAL 67-72 PARTS ALOT of them
Mark, sure will, I may actually think on that some, I'm needing a 2nd crossmember for my blazer to put a skid plate on and the lower piece would be the right one for me. I'll let you know
Brad, I won't have a hood here by then. I'll get pics and post them tomorrow night Thanks Randy |
Re: Valentines SPECIAL 67-72 PARTS ALOT of them
Is the orche tailgate sold? What kind of shape is it in?
|
Re: Valentines SPECIAL 67-72 PARTS ALOT of them
No not sold Cory, its in good shape, couple dings, no rust $225 picked up. Thanks Randy
|
Re: Valentines SPECIAL 67-72 PARTS ALOT of them
I'll take the gmc gate if its still available. Any pics of the other side of it? Thanks, Tim
|
Re: Valentines SPECIAL 67-72 PARTS ALOT of them
Tim, I have to get a shipping price for a guy on it, he seen it on another thread of mine earlier today. I'll let you know if he passes. Thanks Randy
|
Re: Valentines SPECIAL 67-72 PARTS ALOT of them
Passing on gate for now. Thanks Randy
|
All times are GMT -4. The time now is 04:01 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com