Re: How to on our inexpensive airride kit
 

I would like to know if this is aired out or ride height or aired up?

Also how do you go about Alignment? That question is for anyone that can answer, Thanks.

Re: How to on our inexpensive airride kit
 

left a voicemail about info on this kit today. look forward to hearing from you.

thanks

Re: How to on our inexpensive airride kit
 

Subscribed. For future reference. Thanks for the write up way2lo

Re: How to on our inexpensive airride kit
 

Where can I see this $1000 kit?

Re: How to on our inexpensive airride kit
 

most the components are shown in the thread, is there any certain this you want to see?

Re: How to on our inexpensive airride kit
 

I just wanted to see the list of what is included. And if I can break up the package. Just got my truck and doing research.

Re: How to on our inexpensive airride kit
 

Link to website?

Re: How to on our inexpensive airride kit
 

Subscribing, just got mine looking to do some air ride but do not want it to lay frame. I think a kit like this would be perfect for what I am looking for.

Re: How to on our inexpensive airride kit
 

Good write up. Thanks for sharing the pics. Looks good but I have two questions.

How does it ride?

And. Does the front airbag rub on the lower control arm? That looks like a less than ideal angle????

Re: How to on our inexpensive airride kit
 

Those bags are deflated so it looks odd. The bags do touch the control arm on the inside it cant really be avoided with this kind of setup but as long as its not chaffing the bag it doesnt cause any issues. I have driven thousands of miles on a setup like this with little more than a shiny spot where the bag touches and no damage to the bag at all. The bags should be set up to be nice and straight and parallel at your intended ride height so theres usually some misalingnment at full inflation because of the way the arm pivots. Nothing beats the ride quality of a properly set up air ride system. I know you were asking the original poster but I have installed this kit and it is a nice setup for the budget.

Re: How to on our inexpensive airride kit
 

Do you have a kit for a.leaf sprung rear 1966 GMC long bed?

Re: How to on our inexpensive airride kit
 

Where do you guys run the air lines out of the front bags? and where do they go into the cab?

Re: How to on our inexpensive airride kit
 

Re: How to on our inexpensive airride kit
 

Do you need to drill a hole in the cross member or do you come out where the arm meets the frame? So you run it along the bottom of the frame? I want to keep them away from the headers and stuff. Thanks.

Re: How to on our inexpensive airride kit
 

What is the Website? I can't find it.

Re: How to on our inexpensive airride kit
 

Re: How to on our inexpensive airride kit
 

I'm very interested in this kit as well. What does the $1k get me? Just curious what is included in the kit. I went on the website and it looks like the paddles have the valves built into them?

Do you have any diagrams of how to plumb and wire up the kit? The pictures and write-up are great and I'm looking forward to doing this on my '69 C20 asap.

How does this kit differ from the $850 ebay kits that are claimed to be a direct bolt-on setup for 63-72 C10's with dual compressors, tank, bags, switches, valves, etc?

(Please refrain from flaming me for asking the question, but I do think it's a valid one for me and any other members really trying to learn the differences in all the 'kits' out there.)

Re: How to on our inexpensive airride kit
 

unfortunately this is a very old thread and this price no longer applies. I'd be happy to price out any components you like however I couldn't compare it to the eBay kit because I've not seen it. The plumbing is simple and I can supply a diagram, the only wiring is for the compressor and relay, the valves are fully pneumatic

Re: How to on our inexpensive airride kit
 

Hi Boris,

starting to bag my 59...F100 :)

starting at the rear for now and moving to the front with a M2 kit. can you price a econo kit like this, rear step notch and link kit if you sell that. Thanks

Re: How to on our inexpensive airride kit
 

Boris

I need airbags for the rear of my 66 C10. What bag would you recommend and price?

Thanks
Mike

Re: How to on our inexpensive airride kit
 

Awesome build, I'm planning on doing this to my truck ,would I be able to install bags in the front and keep it stock drum brakes up front? or is a disk brake convertion needed? Thanks

Re: How to on our inexpensive airride kit
 

you can keep the drums if you don't use drop spindles but you'll lose 2.5" of easy drop

Re: How to on our inexpensive airride kit
 

Alright thanks for the info man!

Re: How to on our inexpensive airride kit
 

simple. easy. I like it. you guys on ebay aren't you

Re: How to on our inexpensive airride kit
 

Re: How to on our inexpensive airride kit
 

any advise on baggin a 72gmc with leafs? I am going with a flip kit,c notch .next step after is bags .I think I got the front figured out I got 3 inch drop spindles and bags.only solution I can see is helper bags.is that it for a leaf setup?

Re: How to on our inexpensive airride kit
 

you can do the flip, longer shackles and a bag off the axle or just do a four link

Re: How to on our inexpensive airride kit
 

thank you for the quick response sounds like the right way to go thank you.



:gmc2:

Re: How to on our inexpensive airride kit
 

I know this is an old thread. What could you do on price for the same basic kit today for a 72 blazer 2WD?

Re: How to on our inexpensive airride kit
 

any pics for the airbag over axle? or part info?

Re: How to on our inexpensive airride kit
 

Re: How to on our inexpensive airride kit
 

That's for everything?

Re: How to on our inexpensive airride kit
 

everything in the picture and description of original post

Re: How to on our inexpensive airride kit
 

Cool. Can you inbox me you info for payment and total shipped to 17331?

Re: How to on our inexpensive airride kit
 

Looking for this kit for my 1964 c10. If I convert to 2.5 drop spindles (disc brakes) is it wise to run the 5" round weld in cups for the lower A arms you sell or are they not needed since I'll use this kit with drop spindles??? Thanks

BTW I want this same drop here!! I think you did this one.. Correct??

Re: How to on our inexpensive airride kit
 

You just pretty much gave me all the answers I needed and I will definitely be rolling your way for that kit when I'm ready for it. Hopefully sooner than later.

Re: How to on our inexpensive airride kit
 

Can I get a kit price on my 1964 c10 please?

Re: How to on our inexpensive airride kit
 

I guess he doesn't follow this thread anymore. Been a few months.

Re: How to on our inexpensive airride kit
 

You can easly get ahold of Boris here:
https://www.facebook.com/groups/1638350486429453/
This page is hotter than ebay every sunday.