![]() |
Re: 72 Suburban Making it mine
Quote:
|
Re: 72 Suburban Making it mine
Quote:
|
Re: 72 Suburban Making it mine
:waah:
Got the 402 apart, found a few things that didn't make me to warm and fuzzy.. Cylinder 7 has a little issue. This explains the white milky junk that came out of the water passages... it had to be block sealer. http://i27.photobucket.com/albums/c1...psmovwnwac.jpg Also found that the flaking cam was slowly taking out my Number 2 and 3 rod bearings and third main bearing... http://i27.photobucket.com/albums/c1...psdz6di9hq.jpg http://i27.photobucket.com/albums/c1...pswjbo79gm.jpg Rod number 3 http://i27.photobucket.com/albums/c1...psmmh0iea9.jpg The crank lived, it should polish out. The pistons and rings all looked great, very even wear on the top rings, nothing stood out as an issue. The thrust and anti thrust on the pistons are clean and had very little contact with the cyl walls. For a 43 year old engine, it was in great shape... besides the nasty casting flaw... So I sent a mass text out to my Car Guy buds. I found a numbers matching 402... I got it home last night and on the stand. Pulled one head and its a stock bore and I can see cross hatch. Crossing my fingers this block works out. It is funny.... I can almost feel the black hole of the LS world sucking me in..... |
Re: 72 Suburban Making it mine
Yeah, those bearings don't look good. The engine on the stand sounds like a good one though!
|
Re: 72 Suburban Making it mine
Quote:
So after nearly a week of back and forth and wearing my buddies out with options.... I went from ATK crate motor, to rebuild 402, to LS.... Well... LS won out, called my local yard just to see what they had. Well they had just got in an 02 Yukon Denali. I pulled the trigger last night on the engine, and as a bonus, I got all 3 rows of interior!!! in Two tone tan leather I pick up the seats tonight, engine some time next week. |
Re: 72 Suburban Making it mine
Quote:
|
Re: 72 Suburban Making it mine
Decisions...decisions...good direction to go with the LS. Nice score on the seats. Did you get a 5.3? Hopefully it has the accessory drives. Our local yard trashes them for some reason.
|
Re: 72 Suburban Making it mine
I have my local yard trained for LS pull outs. I've gotten enough... Lol
It is a 6.0 LQ9, should work well! |
Re: 72 Suburban Making it mine
Seats need a little cleaning and some repair on the drivers seat, but I think they will be fine
http://i27.photobucket.com/albums/c1...ps00ypabje.jpg |
Re: 72 Suburban Making it mine
Nice to see somebody else from around here! Which yard do you use for your LS stuff? Great work, it really makes me miss my 72 Burb I had in highschool.
|
Re: 72 Suburban Making it mine
I use Neal's there in Peoria. Maybe I'll see you at some local events?
|
Re: 72 Suburban Making it mine
I checked with them when I first started researching an LS swap, they seemed pretty reasonable for a complete lift out. Glad they seem to have treated you right. Maybe, I didn't realize there were many events around Peoria? I've got a lot of friends who keep telling me how simple the swap is but none have ever actually done it. It'd be nice to talk to somebody who has actual experience with an LS swap in our trucks.
|
Re: 72 Suburban Making it mine
Be glad to meet up and discuss
|
Re: 72 Suburban Making it mine
Picked up the 6.0L yesterday.
http://i27.photobucket.com/albums/c1...pshvl4ysbc.jpg Just had our third baby last Friday. May be a couple weeks before I get it ready to install. Cam and springs and lots of cleaning! |
Re: 72 Suburban Making it mine
Congrats on the new toy and the new baby!
|
Re: 72 Suburban Making it mine
Congratulations on the new baby! The 6.0 will be nice.
|
Re: 72 Suburban Making it mine
Thanks guys!
|
Re: 72 Suburban Making it mine
My sis in law and her kids dropped by this afternoon, gave me a couple of hours in the garage
http://i27.photobucket.com/albums/c1...pscmalhkbo.jpg http://i27.photobucket.com/albums/c1...pssfkfqrom.jpg http://i27.photobucket.com/albums/c1...psr7roc203.jpg |
Re: 72 Suburban Making it mine
FedEx guy was at the house today. Vintage air and some new center caps....
http://i27.photobucket.com/albums/c1...psfnzeipce.jpg |
Re: 72 Suburban Making it mine
I really like those center caps!
|
Re: 72 Suburban Making it mine
Quote:
|
Re: 72 Suburban Making it mine
Did some more prep work, put down a little orange to see how it's going to look, I'm digging it!
http://i27.photobucket.com/albums/c1...pseliyjkzp.jpg |
Re: 72 Suburban Making it mine
http://i27.photobucket.com/albums/c1...psdkktcbsn.jpg
Oh that's so much better, more detailing to come |
Re: 72 Suburban Making it mine
Quote:
Yup, lookin' good.... Just keep pluggin' away at it. LockDoc |
Re: 72 Suburban Making it mine
Yes, nice difference. Looks good!
|
Re: 72 Suburban Making it mine
Cam and springs installed, then moved on to more engine bay detailing and vintage air install
http://i27.photobucket.com/albums/c1...psb2qusmqr.jpg |
Re: 72 Suburban Making it mine
Which Vintage Air system? Looks like a sure fit with the plates?
|
Re: 72 Suburban Making it mine
Ya, used the sure fit evap kit, condenser kit, and line kit separate since I am using the LS engine. I have a sanden 508 and holley LS ac brackets
|
Re: 72 Suburban Making it mine
Got a new toy for the shop.... Just need to now make the shed a shop instead of a storage unit!
http://i27.photobucket.com/albums/c1...ps48j1hoo3.jpg It's a 9k lb atlas from Greg Smith equipment. Just finished putting it together tonight. |
Re: 72 Suburban Making it mine
Lookin great man, that 6.0 will be right at home in there :)
|
Re: 72 Suburban Making it mine
Congratulations on the lift! Very handy.
|
Re: 72 Suburban Making it mine
Thanks guys! I snapped a better pic this morning in the day light. I plan to get the Sub on here next weekend and work on fitting the 80E and fuel system up.
http://i27.photobucket.com/albums/c1...psmbhtrj4l.jpg |
Re: 72 Suburban Making it mine
Changed oil in the 79 and my 94 tonight.... Oh the lift was a good addition!
http://i27.photobucket.com/albums/c1...pshkhbrgyz.jpg |
Re: 72 Suburban Making it mine
Nice trucks! A lift is really handy. The only regret with mine is I didn't get it 10 years sooner.
|
Re: 72 Suburban Making it mine
Had some time yesterday and got the LQ9 ready to drop in for the most part.
http://i27.photobucket.com/albums/c1...ps06pipcgm.jpg http://i27.photobucket.com/albums/c1...psjjh8beku.jpg http://i27.photobucket.com/albums/c1...psoyh5pzjz.jpg |
Re: 72 Suburban Making it mine
Well, the 72 Specific Big Block mounts, don't work with the LS.... ]
DS fits fine, http://i27.photobucket.com/albums/c1...psrdjgksyi.jpg PS is off by a bit... http://i27.photobucket.com/albums/c1...pswrt81sxk.jpg Put out some feelers last night, I think I have a lead on some SBC frame mounts. Hope this isn't a sign that it won't be ready for Power Tour.... :( |
Re: 72 Suburban Making it mine
Hope the mounts turn up. Build fast...40 days...plenty of time.
Engine looks good! |
Re: 72 Suburban Making it mine
Found mounts, not to find the time to get them painted and installed!!
|
Re: 72 Suburban Making it mine
It was like assembling a jig saw puzzle, after a lot of fussing, a little cussing, my dad and I got the SBC mounts to agree with the LS and the Suburban frame.
Now, to get on it and get it all going by the end of the month. http://i27.photobucket.com/albums/c1...pssylrjnzj.jpg Hope to get the 80E bolted in this week, and get the drive shaft dropped off to get shortened. Then move on to Exhaust |
Re: 72 Suburban Making it mine
Quote:
Good luck on the projects... I'm in the same boat. I have too many interruptions...:) LockDoc |
All times are GMT -4. The time now is 03:12 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com