Re: 100's of 73/80 pick up and blazer parts F/S
 

These are all I have. Not the greatest with some pitting and one has broken studs.

Let me know if you are interested,
Thomas

Re: 100's of 73/80 pick up and blazer parts F/S
 

Ill take the nicest 77 wood grain bezel. Can you sen a pic up close?

Re: 100's of 73/80 pick up and blazer parts F/S
 

Also ill take nicest wood grained door panel for my 77. Price please?

Re: 100's of 73/80 pick up and blazer parts F/S
 

This is the best one I have. It was not from this parts lot. The price on it is $35.00 plus shipping. Not perfect but would clean up nice for a driver.

Let me know,
Thank you for the interest,
Thomas

Re: 100's of 73/80 pick up and blazer parts F/S
 

I have one that is not part of this lot for $12.50 plus $6.00 to ship to you. This is all I have. These are very hard to get in good shape.

Let me know and I get you taken care of.

Thank you,
Thomas

Re: 100's of 73/80 pick up and blazer parts F/S
 

Yes that is correct. There are three sets. I took better photos of each set for you. They all need some work. They have missing lock bars and one of them has a bent handle. Also there is one set that has a slightly (about 3/4 of an inch) taller seat riser than the other two. If interested, I would take $100.00 for all of them plus shipping.

Let me know and thank you,
Thomas

Re: 100's of 73/80 pick up and blazer parts F/S
 

Hi Mike,

Here are some photos. The bezel has some chrome wear off like most do. The wood grain is nice and there are no broken tabs on the back. $50.00

The door panel inserts are not perfect but not bad either. I will need $50.00 for the pair or $25.00 each.

Plus shipping on all parts. If interested, I will need your zip code to quote for shipping.

Thank you for the interest,
Thomas

Re: 100's of 73/80 pick up and blazer parts F/S
 

Nope, need the dark green. Next in line.

Re: 100's of 73/80 pick up and blazer parts F/S
 

No problem, thank you for the message.

Thomas

Re: 100's of 73/80 pick up and blazer parts F/S
 

I def take the bezel. Are the side panels metal or plastic? If metal, ill take a passenger side one.

Shipping to 27409

Thx, Mike

Re: 100's of 73/80 pick up and blazer parts F/S
 

I will take the red stepside marker lense (red) as well as the door striker posts (1 pr) from earlier post if I can mail a money order for payment as I dont have PayPal. If so just PM an address and name with total $$ needed .
Thanks
John

Re: 100's of 73/80 pick up and blazer parts F/S
 

I will take the seat brackets. It will be tomorrow before I get back on the computer.

Re: 100's of 73/80 pick up and blazer parts F/S
 

Hi John,

Money order is fine. I will PM you the details.

Thank you,
Thomas

Re: 100's of 73/80 pick up and blazer parts F/S
 

I will PM you the details with a shipping quote. Can you give me your zip code please?

Thank you,
Thomas

Re: 100's of 73/80 pick up and blazer parts F/S
 

Hi Mike,

For the dash bezel and pass side door panel insert is $75.00 and $31.41 to ship. $106.41 is the total.

Let me know how you want to pay and I will PM you the details.

Thank you very much,
Thomas

Re: 100's of 73/80 pick up and blazer parts F/S
 

Thomas, is the side insert metal or plastic? And I'll be using PayPal.

Thx

Re: 100's of 73/80 pick up and blazer parts F/S
 

Hi Mike,

It is a metal insert.

Thank you,
Thomas

Re: 100's of 73/80 pick up and blazer parts F/S
 

Sweet. I need just a passenger side and the bezel to 27409. PayPal will be the method.

Re: 100's of 73/80 pick up and blazer parts F/S
 

That looks good to me. I'll take it. Let me know where to send payment to, I prefer Paypal.

Re: 100's of 73/80 pick up and blazer parts F/S
 

Ok, here we go...
Fan shroud and visors won't work for me.

I will definitely take the rear carpet strip and the dash insert.

If the seat backs are a matching set (same color, wear etc) I'll take those.

Can I get closer pictures of the nice gray door panels? I think I want those in my pile too.

Thanks for posting the parts and all your patience.

Re: 100's of 73/80 pick up and blazer parts F/S
 

I don't see anyone in line for the pair of bucket seats so I would like to get in line for them pending a shipping quote to a business address in Bryan , Tx 77808.
Also could you send me a couple more pics of the drivers seat and condition of the frames.
Thanks
Frank

Re: 100's of 73/80 pick up and blazer parts F/S
 

Check on a shipping quote for the truck tailgate band you want 65 for and the two blazer tailgate bands you want 65 each for. My zip is 38930. It is a commercial address.

Thanks!! Clint

Re: 100's of 73/80 pick up and blazer parts F/S
 

I'm looking for a 73 radiator overflow bottle and mount, I think these are 73 only?

I also would be interested in 73 grille mounts, the ones that are (I think) welded to the core support. If you have a rusty 73 core support and can remove (sawzall) the mounts with part of the core support I can remove the spot welds. I haven't seen the 73 grille mounts so I may be way off base.

Re: 100's of 73/80 pick up and blazer parts F/S
 

Sounds good.

I have you covered. Did you get the PM with the payment information?

Let me know. I will get everything ready to ship as soon as payment is verified.

I appreciate the business,
Thomas

Re: 100's of 73/80 pick up and blazer parts F/S
 

Sending you a PM with payment information.

Thank you,
Thomas

Re: 100's of 73/80 pick up and blazer parts F/S
 

Absolutely. I will get some better photos and a shipping quote out to you tomorrow.

Thank you for the interest,
Thomas

Re: 100's of 73/80 pick up and blazer parts F/S
 

Hi Clint,

I will work on your request and get you a shipping quote as soon as possible. If not Friday, then it will be Monday for sure.

Thank you for the interest,
Thomas

Re: 100's of 73/80 pick up and blazer parts F/S
 

I can verify the 73 only tomorrow or Monday for you. Also I believe that the grill mounts do bolt to the core support. I do have a complete set of grill mounts for a 74 GMC grill that I think are the same as a Chevy.

I will let you know what I find out as soon as possible.

Thank you,
Thomas

Re: 100's of 73/80 pick up and blazer parts F/S
 

Thomas I didn't get a pm with payment info. If you can shoot that over I'll send you a payment thi morning.

Thank you sir and here's a little feel good for today!
https://youtu.be/oNxMXDIzSCI

Re: 100's of 73/80 pick up and blazer parts F/S
 

38555

Re: 100's of 73/80 pick up and blazer parts F/S
 

Quote:
Originally Posted by Am3rican View Post
I'm looking for a 73 radiator overflow bottle and mount, I think these are 73 only?

I also would be interested in 73 grille mounts, the ones that are (I think) welded to the core support. If you have a rusty 73 core support and can remove (sawzall) the mounts with part of the core support I can remove the spot welds. I haven't seen the 73 grille mounts so I may be way off base.


I can verify the 73 only tomorrow or Monday for you. Also I believe that the grill mounts do bolt to the core support. I do have a complete set of grill mounts for a 74 GMC grill that I think are the same as a Chevy.

I will let you know what I find out as soon as possible.

Thank you,
Thomas


I will definitely take the rear carpet strip and the non AC dash insert.

If the saddle seat backs are a matching set (same color, wear etc) I'll take those.

Can I get closer pictures of the nice gray door panels? I think I want those in my pile too.

I would like the 73 K5 emblem that has the posts intact

Let me know on the 73 overflow bottle/mount and 73/74 chevy grille mounts, I've heard GMC is different?

Thanks

Re: 100's of 73/80 pick up and blazer parts F/S
 

I will get you the answers and photos you need soon.

Thank you,
Thomas

Re: 100's of 73/80 pick up and blazer parts F/S
 

Hi Mike,

PM on the way.

Thank you and have a good weekend,
Thomas

Re: 100's of 73/80 pick up and blazer parts F/S
 

Payment sent!

Re: 100's of 73/80 pick up and blazer parts F/S
 

Got your payment Mike and well get your parts out today.

Thank you again,
Thomas

Re: 100's of 73/80 pick up and blazer parts F/S
 

Hi John,

I will send you a PM with details.

Thank you,
Thomas

Re: 100's of 73/80 pick up and blazer parts F/S
 

73/74 grill brackets are the same for Chevy and GMC, there are two different sets of holes on the center bracket...one set for each brand. Also, you really only need the center bracket/latch and two outermost brackets to retrofit to a newer (73-80) core support. Done this for several trucks.

Re: 100's of 73/80 pick up and blazer parts F/S
 

Hi Frank,

Here are some better photos of the seats and the shipping quote. To get them to your zip code (business) via UPS will run $200.00 so the total would be $350.00 to your door. They are not cheap to ship and they do not break down to make a smaller package like some seats do.

Let me know. Thank you for the interest,
Thomas

Re: 100's of 73/80 pick up and blazer parts F/S
 

Greyhound can ship them much cheaper. Spoon em or 69 'em (for lack of a better term), plastic wrap em tight, and drop them off. Will be under $100 to ship those. Done this on a few sets.

Just an FYI to help a sale.

Re: 100's of 73/80 pick up and blazer parts F/S
 

I appreciate the suggestion. We do not have a Greyhound terminal close by and I do not have the man power here to travel to the closest location.

Thank you,
Thomas