Re: 1964-1966 center a/c vent
 

I already bought your center vent assembly...and am on the list for the side vents...do you have those yet? If so, please PM me and I will pay today. Thanks

Re: 1964-1966 center a/c vent
 

corvettejim1968, I am somewhere on that list but I am in no hurry if there are plenty more in front of me. Mine could wait until even this summer if need be. I'm easy with that stuff. Thanks and keep up the good work.

Re: 1964-1966 center a/c vent
 

thank you. you are #50 on the list

Re: 1964-1966 center a/c vent
 

Jim, where am i in line for side vents, mark

Re: 1964-1966 center a/c vent
 

your next in line. i might have yours done today. been working alot on the project today.

Re: 1964-1966 center a/c vent
 

got a lot of work done today. check your pm box.

also making a new mold for the large vent balls.

Re: 1964-1966 center a/c vent
 

Do you have side vents available? Where am I on the list for those please?

Re: 1964-1966 center a/c vent
 

so I received a special request if I could make the vent balls in black. well the process takes a little longer and the part takes longer to cure so i will need to charge a little more ($5) per part but here is the first example. I have black,violet,blue,and white

http://img.photobucket.com/albums/v6...psbfxllbed.jpg

Re: 1964-1966 center a/c vent
 

Looks awesome!

Re: 1964-1966 center a/c vent
 

just made a new clip mold. i built up the thickness in hopes it will not break as easy as before.



a reminder you want to glue the clip in when its time to do the install. the original clip is metal and a proprietary part so i molded off the original in resin. its the best i can do.

Re: 1964-1966 center a/c vent
 

check your in boxes I have another assembly done and will go down the list until somebody takes it.

Re: 1964-1966 center a/c vent
 

Hey Jim, where am I on the list? Not a huge rush just dont want to miss my shot.

Re: 1964-1966 center a/c vent
 

ditto same question. thank you.

Re: 1964-1966 center a/c vent
 

Hey, I really like the black vents. I'd like to get on your list for the entire set-up with the black vents.

Re: 1964-1966 center a/c vent
 

dont worry I just skip over those that dont respond and just come back to them on the next go around. ive had a few that never respond so you just might get your parts sooner than later.

Re: 1964-1966 center a/c vent
 

hi,just hoping i/m still on the list

Re: 1964-1966 center a/c vent
 

just finished a set today. I will be going down the list until somebody bites

Re: 1964-1966 center a/c vent
 

ive got a fact vent -just need the balls rechromed & buy a set of your felts {will they fit my factory vent balls ?]thanks mike

Re: 1964-1966 center a/c vent
 

yes they fit perfect. took me several samples to find the correct felt size.

Re: 1964-1966 center a/c vent
 

do you anybody to do the rechrome on the balls ?that you would share ?? if not -no problem !! thanks mike - send me a pm on paying for them felts -thanks again mike

Re: 1964-1966 center a/c vent
 

been working really hard on the project making progress

Re: 1964-1966 center a/c vent
 

I'm really getting this down . made lots of parts this month and making good parts every time now. I fulfilled 4 orders just in the last week. let me know if you want on the list things are moving much faster now.

Re: 1964-1966 center a/c vent
 

okay ive texted ,called, pmed, imed everybody on the list.

there are 36 people on the list as of today. parts are coming alone great. I'm getting 1 to 2 sets done per week now.

Re: 1964-1966 center a/c vent
 

just curious if my vent "felts " was shipped ?? thanks mike-im sure i pay paled you ??

Re: 1964-1966 center a/c vent
 

have not received any money from you