Re: Bench Seats, Having them Reupholstered
 

Took advantage of the somewhat milder weather and got some seat frames back from the sandblaster, and got those repainted and repaired. Replaced the broken End Springs on the 73 seat frame. Also got the tracks for the same seat restored and installed a new knob for the one that was missing.
The 81-87 frames, some of the springs were replaced. A few of the other frames received all new Grids & Springs.
Before Pics

Re: Bench Seats, Having them Reupholstered
 

After Pics

Re: Bench Seats, Having them Reupholstered
 

1981-1987 fully restored Black Velour Deluxe Benchseat. New Grid and Springs also.

Re: Bench Seats, Having them Reupholstered
 

Just completed a fully restored bench seat in Burgundy Velour. This will be used for a front seat in a Suburban. Will be picked up later this week.

Re: Bench Seats, Having them Reupholstered
 

Here’s a fully restored bench seat that was done for someone. 1981-1987 Blue Velour Silverado Deluxe.

Re: Bench Seats, Having them Reupholstered
 

Another Burgundy for someone local

Re: Bench Seats, Having them Reupholstered
 

1981-1987 Black Velour Custom Deluxe. Fully restored, using a new foam, Gris and springs.

Re: Bench Seats, Having them Reupholstered
 

Well crap. Discovered today my 85 seat is literally falling apart. The lower horizontal bar has detached. Also noticed the back foam seems to be attached to the frame. How is this replaceable? @TKCR, is this fixable? If not, can you PM me. I have questions on getting a rebuilt unit from you. Looking to change to black. Thanks

Re: Bench Seats, Having them Reupholstered
 

Yeah it’s fixable, I get those a lot. Just have to weld it back up. It was a poor welding job from GM. A lot of them I noticed that only the front half of the bar was welded, nothing on the backside, which was probably the most important side since that is where all the weight goes. But in all reality, the weld needed to go clear around the entire bar. There were some that looked like they were just tac welded, and that was it!
The foam on the back, since it’s attached, would just need repaired versus replaced.
What you found, is typical on almost every seat I repair & restore. That why I restore the seats the way I do. Most upholstery shops wouldn’t care about this stuff. Most people were never even aware that their bar was even broken.
Last pic shows the typical GM weld missing on the backside of the seat sack bar. :devil:

Re: Bench Seat, Having it Reupholstered
 

I am reupholstering a 72 GMC C15 bench seat. I have new foam on and the new cover was a tight fit after putting it on in the Arizona sun. After reattaching the seat together, I have a 2-3 inch gap in the middle. Any tips to remedy that? Thanks for any help you can provide!

Re: Bench Seats, Having them Reupholstered
 

NOT For Sale
Got another seat restored and built for someone. This is a 1981-1987 Black Velour Deluxe. Fully restored.
Will be picked up later this month.

Gettin down to the nitty gritty on the seat cores I have left to use. Once they are used up, I will no longer be doing anymore seats. I will mainly be restoring the seatbelts only.

Re: Bench Seats, Having them Reupholstered
 

Been getting the last of seats done for people. These have all been picked up.
This is my new RECORD. Came from Texas, 16.5 hrs one way!

Re: Bench Seats, Having them Reupholstered
 

Picked up from Wisconsin! I did drive about an hour to meet, to save a little drive time.

Re: Bench Seats, Having them Reupholstered
 

And this one drove from the St. Louis, MO area. 7 hrs one way!

Re: Bench Seats, Having them Reupholstered
 

1981-1987 Black Vinyl. Fully restored with New Foam, new grid and all new springs. Being picked up this weekend.

Re: Bench Seats, Having them Reupholstered
 

73-74 Blue Cloth. Tilt Bench Seat.
Going to be picked up.
Just a couple more outstanding orders to build, and then I’ll be done doing the seats.

Re: Bench Seats, Having them Reupholstered
 

1975-1976 Blue fully restored Benchseat. Will be picked up Monday