Re: D52 Caliper Rear Disc Brake Brackets
 

Payment sent for a set sir.

Re: D52 Caliper Rear Disc Brake Brackets
 

I have made a fatal mistake on my truck and cannot use your rear brake kit. My truck is a standard with a borg warner R10 overdrive which means my truck freewheels even with the truck in reverse and off. In other words I HAVE TO HAVE an e brake or my truck roles away in gear. I highly apologize and understand if you take some of the refund out for your troubles and fees. Please let me know if a refund is an issue. Again this is my fault and a public apology!

Re: D52 Caliper Rear Disc Brake Brackets
 

You apparently did not read page 1 of this for sale thread where the e-brake style of calipers are talked about.

Re: D52 Caliper Rear Disc Brake Brackets
 

Yes I read that but i do not want to use the caddie brakes. I have already purchased the D52's and now have to send the rears back as well. I dont want the mismatched brakes. To be honest it was more about looks than function for me.

Re: D52 Caliper Rear Disc Brake Brackets
 

He sells brackets for Camaro calipers as well which have e-brake.

Re: D52 Caliper Rear Disc Brake Brackets
 

Re: D52 Caliper Rear Disc Brake Brackets
 

Anything in the works for this same setup on a Ford 9"?

Re: D52 Caliper Rear Disc Brake Brackets
 

Sorry but no. If you are running stock Ford housing ends, just about everyone runs the Explorer rear disc assembly. If you are running a narrowed 9" with the correct Impala/truck housing ends, I have the correct base brackets that will retain the axle bearings and allow you to be able to run these D52 brackets.

Re: D52 Caliper Rear Disc Brake Brackets
 

Do you still sale these brakets?

Re: D52 Caliper Rear Disc Brake Brackets
 

I replied to your PM :)

Re: D52 Caliper Rear Disc Brake Brackets
 

I will be on vacation from 08-08-16 thru 08-25-16. If you wish to make a purchase you can post here in this for sale thread, send me a PM or an email to captainfab454@hotmail.com. I will reply to your inquiry when I return on the 25th. I do currently have a list of orders to build and ship when I return but I will add your name to the list in order of when received. Thanks for your understanding.

Re: D52 Caliper Rear Disc Brake Brackets
 

Are you still making these brackets? They look way sturdier than the junk on eBay.

Re: D52 Caliper Rear Disc Brake Brackets
 

Yes, I make all of my products everyday including these D52 brackets. Send me a PM for ordering/payment info.

Re: D52 Caliper Rear Disc Brake Brackets
 

Sent you an email Capt

Re: D52 Caliper Rear Disc Brake Brackets
 

I replied to your email.

Re: D52 Caliper Rear Disc Brake Brackets
 

I received my brackets today!!!!! I'm excited!!!! These things are heavy duty. I had purchased a set of weld on brackets from anther vendor but when they arrived, i wasn't too convinced with the 1/4" steel. You get what you pay for. Those 1/4" brackets were only about 10 bucks a piece and no hardware. These Captain brackets are worth every penny. I was very impressed with the packaging. I have had delicate items delivered with much less padding than these brackets did. Sorry for jumping around, its just a good day. I'm hoping to finish my propane tank smoker this weekend so my son and i can get started on this. Thanks Capt.

BTW, whats everyone doing for the MC and the proportioning valve. I was thinking using a MC from a 1982 corvette and a PV4 combination valve. Any thoughts

Attachment 1591135

Re: D52 Caliper Rear Disc Brake Brackets
 

I'm using a Mopar MC since they are aluminum & plastic and make for a really clean & cheap install. They have 3/8" fittings and come in a wide range of bore sizes. You need to open up the mounting holes slightly but otherwise they bolt right onto the firewall.

Here are the part numbers I've gathered:
https://snag.gy/oDkjZ5.jpg

I am using a cheap ebay prop. valve inline with the rear circuit.

Re: D52 Caliper Rear Disc Brake Brackets
 

Thanks crakarjax, i'll check into those. That's some good info you got there on the MC's.

Re: D52 Caliper Rear Disc Brake Brackets
 

I would just use a '77-'82 Corvette master and the prop valve for that application and/or an adjustable valve in the rear line. If you want an aluminum and plastic master, the '83+ Corvette, '85+ F-body's, '85+ Eldorado's, '94-'96 Impala SS. Caprice 9C1's as well as C/K1500 trucks in the 90's with 4 wheel disc will work.

Re: D52 Caliper Rear Disc Brake Brackets
 

will these work with a 15" wheel? i currently have them on my pickup but want to step down to a smaller rim.

Re: D52 Caliper Rear Disc Brake Brackets
 

Yes, 15" wheels will work as long as they are disc brake compatible wheels.

Re: D52 Caliper Rear Disc Brake Brackets
 

You selling axle flanges by them selves? I need a 1/4 inch thick for Myou different swap...pm sent

Re: D52 Caliper Rear Disc Brake Brackets
 

I need a set of bracket for my 1968 GMC. How much for the ones you sell for the Camaro calipers? What rotor will I need to purchase?
Thanks CJ

Re: D52 Caliper Rear Disc Brake Brackets
 

I replied to your post in the Camaro Caliper Bracket for sale thread.

Re: D52 Caliper Rear Disc Brake Brackets
 

What about brackets for a six lug 12 bolt? I saw that you discontinuing the six brackets to make a better set in another thread. thanks