Re: 1964 GMC 3/4 ton build :D
 

Got the tap shift board and usb power circuits mounted to the face panel just need to acquire my trans temperature gauge soon so it will be all complete.
Sean

Re: 1964 GMC 3/4 ton build :D
 

Dayaaaaaammmm!

Re: 1964 GMC 3/4 ton build :D
 

yeah love the specs on them 3 1.81 inch pistons in each caliper. the fronts that match them have 3 2 inch pistons

Sean

Re: 1964 GMC 3/4 ton build :D
 

Well there was no other recourse lol kept loosing track of where I was putting some of my smaller project pieces and parts lol so went in and cleaned all of the drawers out sorted the trays and labeled the danged drawers. Finally can keep track what tray is where now lol.

Sean

Re: 1964 GMC 3/4 ton build :D
 

Also got around to getting the bed off the 60's frame out back and placed it on a dolly. Disassembly is going well just have to finish cutting the rear bed welds to get the bedsides completely loose then it will be ready for sand/water blasting and ready to primer and paint. Some minor body work will be needed on the passenger side thanks to homeless people throwing stuff in the bed and banging up the sides :/

Sean

Re: 1964 GMC 3/4 ton build :D
 

Well also got the e brake buttons in got lucky and found an autoloc kit on amazon and ordered not badly priced either complete with aluminum bezel 2 switches and 2 plug harnesses. Also linear actuator is in and sitting in a drawer ready to go. I need to look at how to mount it to the trans cross member but that''s just a lil issue to deal with in over all scheme of things

Sean

Re: 1964 GMC 3/4 ton build :D
 

getting it closer to fully aligned. passenger side is dialed in and marked for drilling passenger side just needs a tad bit of out fender pressure to line right up. gonna be nice when finished :D

Sean

Re: 1964 GMC 3/4 ton build :D
 

Well been busy working on little projects and gathering more stuff lol. I found that hot wheels at some point released 60-66 key chains lol so I got me one recently and put my truck keys on it lol. Also got the alternator in and mounted to the truck waiting on the AC compressor as well at the moment. Plus got the american billet hood hinges in and currently in the process of getting them mounted and checked out.

Sean

Re: 1964 GMC 3/4 ton build :D
 

here is the alternator lol. Also picked up a tool for my buddy who is looking at building me a in bed gas tank cover made of matching oak with chromed bed strips to match the bed. It cuts the channel on the edges of the bed boards like the factory did. Also picked up a new larger compressor I am currently getting wired into the shop and ready to go for some projects that need more CFM then my lil shop compressor can handle. And lastly saw this bad ass engine cover a guy made with an old rotted out hood :D

Sean

Re: 1964 GMC 3/4 ton build :D
 

well now that I got a compressor up n running with bigger lungs lol started sanding and restaining the bed wood to get it ready for the clear coat eventually. Got 3-4 more boards to finish then get clear coat in to start coating em down.

Sean

Re: 1964 GMC 3/4 ton build :D
 

Also working on getting the engine ready to fire up and dealing with lots of little issues lol mounting the maf 4inch tube to big 3.5 inch tube to small grrr!!!!!! starter is mounted and ready to go, belt mounted up with accessories in place, new sensors all around. Just need radiator and hoses in place and a battery with a flip switch to start it up. that wake sure everything is gonna work properly lol. Still have to get the core support holes drilled and mounted again. Also hooking up the trans thermostat to the cooler as well.
Sean
The second picture is how the MAF issues has got me feeling today

Re: 1964 GMC 3/4 ton build :D
 

Well getting further along on the bed wood its all sanded down and restained and looks much better now :D will be starting on the marine clear coat varnish tomorrow afternoon. More posts to come on that. Also got the wiring in for the battery starting and charging circuits and quite pleased with how it is coming along.

Sean

Re: 1964 GMC 3/4 ton build :D
 

Here are pictures of the charging, starter, and fuse box power cables. found some neat tri way battery feeds through knu conceptz website.

Sean

Re: 1964 GMC 3/4 ton build :D
 

more pictures :D

Sean

Re: 1964 GMC 3/4 ton build :D
 

Lookin' good Sean :thumbs:

Where did you find that mega fuse holder? I like that one better than the typical ones I have seen with the phony rubber cover.

Re: 1964 GMC 3/4 ton build :D
 

Hey Captain,
Here is a link to them: https://www.mouser.com/ProductDetail/576-02981003ZXT
10 bucks for them at mouser not a bad price. The chevy police editions also had a 3 bank model of them as well.

Sean

Re: 1964 GMC 3/4 ton build :D
 

Thanks Sean :)

Re: 1964 GMC 3/4 ton build :D
 

Well after futzing around and going back on forth between bench and truck got the lower heater and defroster valve in place on the truck. took a bit of contrapting to keep the hoses clear of all the belting stuff lol.

Sean

Re: 1964 GMC 3/4 ton build :D
 

Also over last few weeks been working on the power cable setups and how to manage the multiple power feeds running through the engine compartment. At this time its 90% done. Still debating on using the clamps you see in the pictures versus a setup I found that uses plastic insulation inserts still looking at both options right now.

Sean

Re: 1964 GMC 3/4 ton build :D
 

and lastly started getting the battery tray squared away lol have been building it over the past week and its coming out pretty nice. Still have some smoothing and shaping to do the the major weight support leg but quite happy with its turn out.

Sean

Re: 1964 GMC 3/4 ton build :D
 

more pics of tray build

Sean

Re: 1964 GMC 3/4 ton build :D
 

also got this lil gem in yesterday. 1965-1975 Canadian GMC parts panual hehehehehehehehe going to start looking at some of the few differences in here :D

Sean

Re: 1964 GMC 3/4 ton build :D
 

Well start getting things reassembled and aligned for the body shop to start finishing the pain here soon. and oooohhhhh man the bed is turning out verrrrryyyyy nicely quite happy with this one!!
Aluminum core support is making some progress, battery tray 90% finished.. motoring right along. waiting on some parts to come in guy found that with minor mods a 93 electric window regulator from a chevy van will work in our trucks with a few minor mods will see what it requires and post it up on another thread :D

Sean

Re: 1964 GMC 3/4 ton build :D
 

The bed floor looks great Sean :thumbs:

Re: 1964 GMC 3/4 ton build :D
 

Hey Captain,
Yeah it turned out gorgeous and also found a crystal clear bedliner to coat it with so it should last a long time!

Sean