The 1947 - Present Chevrolet & GMC Truck Message Board Network
Page 24 of 26 « First 141920212223 24 2526
Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)
-   -   The 60-66 "PAYING IT FORWARD" thread! (https://67-72chevytrucks.com/vboard/showthread.php?t=671262)

60short 12-09-2021 07:27 PM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
Id like the shop manual, and the steering box if still available.

I have a job interview in Palo Alto on Friday afternoon, but would be headed down south through Mountain View if I could pick up on Saturday AM.

Thanks,
Keith

goatless 12-09-2021 08:47 PM
Quote:
Originally Posted by 60short (Post 9005279)
Id like the shop manual, and the steering box if still available.

I have a job interview in Palo Alto on Friday afternoon, but would be headed down south through Mountain View if I could pick up on Saturday AM.

Thanks,
Keith
PM sent.
Posted via Mobile Device

72cs20 01-13-2022 11:53 PM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
2 Attachment(s)
I have two good original wire harnesses that need new homes. One from a 66 K20 and one from a 62 C20. The wires and connectors are in good condition. They both have the dash and engine portions. Neither one has a complete harness to the rear.

The 66 had gauges and hazard light switch. The 62 had idiot lights.

goatless 01-13-2022 11:59 PM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
All from a 1964 C10:

* Used master cylinder - Single reservoir original type
* Approximately 2 year old used master cylinder - Single reservoir original type
* Used OEM track bar
* Radiator. Has leak

Local pickup only.

val1gonzales 01-14-2022 12:46 AM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
I need the 66 wiring harness. Mine is all taped up and ready to start a fire.

72cs20 01-14-2022 06:57 PM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
Quote:
Originally Posted by 72cs20 (Post 9018677)
I have two good original wire harnesses that need new homes. One from a 66 K20 and one from a 62 C20. The wires and connectors are in good condition. They both have the dash and engine portions. Neither one has a complete harness to the rear.

The 66 had gauges and hazard light switch. The 62 had idiot lights.
66 harness spoken for. 62 harness still available

72cs20 01-14-2022 07:00 PM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
1 Attachment(s)
New repro 64-66 2wd gas pedal.

72cs20 01-14-2022 07:20 PM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
2 Attachment(s)
I posted these awhile back and had no takers. Here goes again.

Four hub caps from a 62 C20 with 17.5 tubeless wheels.

Five 17.5 tubeless wheels with good clips for the caps.

I can ship the hubcaps.

The wheels need to be picked up. For the wheels - If no arrangements are made or they are not picked up by the end January, they're off to the recycler. I'm cleaning house.

Located in Los Gatos, Ca.

cwcarpenter98 01-14-2022 08:40 PM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
Quote:
Originally Posted by 72cs20 (Post 9019244)
I posted these awhile back and had no takers. Here goes again.

Four hub caps from a 62 C20 with 17.5 tubeless wheels.

Five 17.5 tubeless wheels with good clips for the caps.

I can ship the hubcaps.

The wheels need to be picked up. For the wheels - If no arrangements are made or they are not picked up by the end January, they're off to the recycler. I'm cleaning house.

Located in Los Gatos, Ca.
I'll pay for the shipping on the hubcaps. To 31061 please

72cs20 01-14-2022 09:28 PM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
Quote:
Originally Posted by cwcarpenter98 (Post 9019291)
I'll pay for the shipping on the hubcaps. To 31061 please
They're yours. PM me your shipping info.

oem4me 01-14-2022 10:32 PM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
Quote:
Originally Posted by 72cs20 (Post 9019244)
I posted these awhile back and had no takers. Here goes again.

Four hub caps from a 62 C20 with 17.5 tubeless wheels.

Five 17.5 tubeless wheels with good clips for the caps.

I can ship the hubcaps.

The wheels need to be picked up. For the wheels - If no arrangements are made or they are not picked up by the end January, they're off to the recycler. I'm cleaning house.

Located in Los Gatos, Ca.
I'd love to get them. Such a shame to send them to the scrapper when I'm after those very wheels. The problem would be getting them down here in an affordable manner. Any ideas?

72cs20 01-14-2022 10:51 PM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
Quote:
Originally Posted by oem4me (Post 9019375)
I'd love to get them. Such a shame to send them to the scrapper when I'm after those very wheels. The problem would be getting them down here in an affordable manner. Any ideas?
If you really want them, I foresee a road trip in your near future

cwcarpenter98 01-14-2022 11:07 PM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
Quote:
Originally Posted by 72cs20 (Post 9019329)
They're yours. PM me your shipping info.
PM sent with shipping info. Thank you!

goatless 01-16-2022 05:19 PM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
4 Attachment(s)
All from a 1964 C10:

* Used master cylinder - Single reservoir original type
* Approximately 2 year old used master cylinder - Single reservoir original type
* Used OEM track bar
* Radiator. Has leak
* Left and right doors.

62K20 01-16-2022 06:36 PM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
72cs20, I'll take the 62 wire harness if it's still available.

72cs20 01-16-2022 06:55 PM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
Quote:
Originally Posted by 62K20 (Post 9020248)
72cs20, I'll take the 62 wire harness if it's still available.
It's yours. PM me your shipping details.

val1gonzales 01-22-2022 03:44 PM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
72CS20 just got the wiring harness today! It's in great condition and I can even read the lettering on the fuse block! Already got my fire-hazard wiring out. Going to get on cleaning this one up and ready for install. Thank you very much. Good looking out!

72cs20 01-22-2022 06:29 PM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
Quote:
Originally Posted by val1gonzales (Post 9022960)
72CS20 just got the wiring harness today! It's in great condition and I can even read the lettering on the fuse block! Already got my fire-hazard wiring out. Going to get on cleaning this one up and ready for install. Thank you very much. Good looking out!
Great! Glad to help.

Short 3/4 01-24-2022 11:32 PM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
Quote:
Originally Posted by goatless (Post 9020200)
All from a 1964 C10:

* Used master cylinder - Single reservoir original type
* Approximately 2 year old used master cylinder - Single reservoir original type
* Used OEM track bar
* Radiator. Has leak
* Left and right doors.
Doors look a lot better than the ones I have. I'll be in the Bay Area the weekend of Feb 12-13. If they are as good as the pictures look I would love to pick them up
Tom

roll_the_dice 01-24-2022 11:46 PM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
Quote:
Originally Posted by goatless (Post 9020200)
All from a 1964 C10:

* Used master cylinder - Single reservoir original type
* Approximately 2 year old used master cylinder - Single reservoir original type
* Used OEM track bar
* Radiator. Has leak
* Left and right doors.
Would love the "Approximately 2 year old used master cylinder - Single reservoir original type" if it doesn't have any rust on the inside. I can pay for shipping. Thanks, let me know.

Andy

Short 3/4 01-25-2022 11:34 AM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
Quote:
Originally Posted by Short 3/4 (Post 9024115)
Doors look a lot better than the ones I have. I'll be in the Bay Area the weekend of Feb 12-13. If they are as good as the pictures look I would love to pick them up
Tom
I am assuming you are in the Mountain View near San Francisco. If so, please PM me, as I want them
Thanks
Tom

goatless 01-25-2022 02:16 PM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
Quote:
Originally Posted by Short 3/4 (Post 9024370)
I am assuming you are in the Mountain View near San Francisco. If so, please PM me, as I want them
Thanks
Tom
Yes, I am in MV near SF. I'll send a PM.

goatless 01-25-2022 02:39 PM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
Quote:
Originally Posted by roll_the_dice (Post 9024123)
Would love the "Approximately 2 year old used master cylinder - Single reservoir original type" if it doesn't have any rust on the inside. I can pay for shipping. Thanks, let me know.

Andy
PM sent.

goatless 01-28-2022 07:41 PM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
5 Attachment(s)
Quote:
Originally Posted by goatless (Post 9024456)
PM sent.
Uploaded pics for reference.

65ChevyC20 01-31-2022 08:52 PM
Quote:
Originally Posted by 72cs20 (Post 9019227)
New repro 64-66 2wd gas pedal.
Interested if you still have it
Posted via Mobile Device


All times are GMT -4. The time now is 02:51 AM.
Page 24 of 26 « First 141920212223 24 2526
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com