Re: What did you do to your truck today? Chapter II
That they are. I used 3 super-duty magnets to hold the cover in place and 2 stainless pins on the bottom. you need quite a bit of force to pull the cover off, so might end up putting on a billet handle. have to see how it goes
|
Re: What did you do to your truck today? Chapter II
1 Attachment(s)
Somewhat finished my gauge cluster thanks to 70shortfleet. Thanks for tach tin ! Really need to find a decal for my lens for vaccum.
|
Re: What did you do to your truck today? Chapter II
Quote:
|
Re: What did you do to your truck today? Chapter II
3 Attachment(s)
IM getting my frame ready :metal:
|
Re: What did you do to your truck today? Chapter II
I've been spending the last few weeks trying to get my wheels finished to my satisfaction. I bought 8 inch rally's for the back and 7 inches up front. It has been hard finding a pair of thin trim rings for the front to match a wider pair on the back to enhance the wheel and tire size difference. Finally I found a wheel vintiques ring to fit with my metal valve stems. I wanted a little wider for the front, but this was the only compromise I could find. Here are a couple of pics. Tomorrow I'm doing a complete brake job to include new drums and slave cylinders.
http://i1320.photobucket.com/albums/...psd8feeb6b.jpg [/URL]320.photobucket.com/user/Oregonned/media/imagejpg1_zps45937cdd.jpg.html]http://i1320.photobucket.com/albums/...ps45937cdd.jpg[/URL] |
Re: What did you do to your truck today? Chapter II
[QUOTE=OregonNed;6646391]I've been spending the last few weeks trying to get my wheels finished to my satisfaction. I bought 8 inch rally's for the back and 7 inches up front. It has been hard finding a pair of thin trim rings for the front to match a wider pair on the back to enhance the wheel and tire size difference. Finally I found a wheel vintiques ring to fit with my metal valve stems. I wanted a little wider for the front, but this was the only compromise I could find. Here are a couple of pics. Tomorrow I'm doing a complete brake job to include new drums and slave cylinders.
I ran into the same issue when I switched to Rally wheels. I put the same size trim ring 1.75" on the front and rear. Not completely happy with it. What are the Wheel Vintages part numbers Your wheels looks great. http://i212.photobucket.com/albums/c...psfed8e670.jpg |
Re: What did you do to your truck today? Chapter II
http://m.summitracing.com/parts/WVI-3002-1
These fit my 8 inch wheels great but not the 7's. Thanks! |
Re: What did you do to your truck today? Chapter II
Quote:
|
Re: What did you do to your truck today? Chapter II
http://i1183.photobucket.com/albums/...3FDCF588F7.jpg
New glass came in and the led lighting for the engine bay.. |
Re: What did you do to your truck today? Chapter II
1 Attachment(s)
I got the new spring installed on my front end, ride height looks great now...
also started mocking up my Motor... a bunch of stuff started coming in this week... |
Re: What did you do to your truck today? Chapter II
Been working on detailing the engine. Still out in the garage but the race and beer have kind of taken over. I at least need to get the new water pump installed before I call it a day.
|
Re: What did you do to your truck today? Chapter II
Finally replaced the brake hoses on my 67 long step and successfully bled the brakes. Should be more or less driveable now, but out of gas. Couldn't drive it around to test. A little bit closer though.
|
Re: What did you do to your truck today? Chapter II
Today I blocked up my truck's cab, scraped, sanded, and blew off all the rust I could, and hit it with NAPA Rust Inhibitor. Tomorrow I'll spray the brackets with some rubber undercoating and next week.....put in the new cab-to-frame bushings!
And people wonder why I save all my scrap wood..... :) :) :) http://i1313.photobucket.com/albums/...ps6db62253.jpg |
Re: What did you do to your truck today? Chapter II
1 Attachment(s)
Well I finally picked a color and we got the cab painted inside and out. Looks good to see some color after all this work.
|
Re: What did you do to your truck today? Chapter II
Quote:
|
Re: What did you do to your truck today? Chapter II
Quote:
|
Re: What did you do to your truck today? Chapter II
It is 1967 chev Tahoe turquoise or also called mariner turquoise.
|
Re: What did you do to your truck today? Chapter II
Got most of my drum brake job done yesterday with the help of my father in law. Just waiting for inner bearing oil seals to finish up the fronts.
|
Re: What did you do to your truck today? Chapter II
Got this thing outta there...
http://i107.photobucket.com/albums/m...ps14r7vw0s.jpg So this newly built 383 can go in there... http://i107.photobucket.com/albums/m...ps7c6236b4.jpg But first time for some super clean before frame paint... http://i107.photobucket.com/albums/m...pso2somzp9.jpg http://i107.photobucket.com/albums/m...ps6fkf37aa.jpg And in a feat of typical ADD multitasking wizardry... mocking up for the new buckets while the superclean soaks in.. http://i107.photobucket.com/albums/m...psuspmkemx.jpg |
Re: What did you do to your truck today? Chapter II
New delay wiper mod done. Installed switch under orignal switch. They work great.:chevy:
http://i1233.photobucket.com/albums/...ps5f435116.jpg http://i1233.photobucket.com/albums/...ps0259cdcc.jpg Here are the video's of the operation from slowest to fastest.https://www.youtube.com/watch?v=Bix2VaFk4oE https://www.youtube.com/watch?v=g_IdK8G1Rl8 |
Re: What did you do to your truck today? Chapter II
Quote:
|
Re: What did you do to your truck today? Chapter II
2 Attachment(s)
Got a little color on my engine today, starting to get excited.
|
Re: What did you do to your truck today? Chapter II
Nice to see that I'm not alone in deciding to paint my aluminum intake.. Cool
|
Re: What did you do to your truck today? Chapter II
Today felt like a bust but it was actually pretty productive.
I bought a 6" Craftsman vice. I thought about this one a long time: I figured a Wilton would be better but it would have involved $150.00 more plus a 140 mile round trip. Starting tomorrow, I'll mount her to my workbench. I undercoated my bushing brackets. I tried to drill out the broken bolt but my center punch would dull! That's one hard bolt! The most important thing I did today was moving the crated fender outside. It weighs some 200 lbs in that crate it's in....it's outside now under a tarp. my neighbor come down and helped me carry it out. Now I have the room to make my fuel lines! Which I plan to start on as soon as the vice is mounted to the table. |
Re: What did you do to your truck today? Chapter II
Removed the plastic insert from the grill and cleaned up the hood latch assembly.
https://www.flickr.com/photos/kylese...y/14040896551/ https://www.facebook.com/KyleSealPho...00820370431135 |
All times are GMT -4. The time now is 10:46 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com