Re: Lets Play Whatz It? !!
 

Looks like a barrel bung tool... maybe just looks a little short.

Re: Lets Play Whatz It? !!
 

That one is kind of tough, So I will give you guy's the answer.....LB7 Duramax Injector Puller.

Here's an easier one.

Re: Lets Play Whatz It? !!
 

Battery terminal spreader.

Re: Lets Play Whatz It? !!
 

Hmm.... but it looks like something my dentist has used on my teeth... scary... I know he wrenches some too... :jdp:

Re: Lets Play Whatz It? !!
 

John got it.

Re: Lets Play Whatz It? !!
 

eeeeeeeewwwwwwwwww. :(

Next?

Re: Lets Play Whatz It? !!
 

Re: Lets Play Whatz It? !!
 

Those are used to trim horses hoofs.

Re: Lets Play Whatz It? !!
 

nope...........

Re: Lets Play Whatz It? !!
 

Barb wire fence/fencing tool

Re: Lets Play Whatz It? !!
 

hint- automotive related


another view....


http://i5.photobucket.com/albums/y16...134313_590.jpg

Re: Lets Play Whatz It? !!
 

wire crimper

Re: Lets Play Whatz It? !!
 

terminal crimper for battery cables? looks big to be a normal crimper

Re: Lets Play Whatz It? !!
 

....not electrical related...

Re: Lets Play Whatz It? !!
 

Hose clamp crimper ?

Re: Lets Play Whatz It? !!
 

Wheel weight removers ?

Re: Lets Play Whatz It? !!
 

this one is bugging me......


hmmm..... bearing cap tool?

Re: Lets Play Whatz It? !!
 

think auto body .....

Re: Lets Play Whatz It? !!
 

I wondered auto body
Fender bender lol ?
Crimps maybe a door skin bend?

Re: Lets Play Whatz It? !!
 

We'll have to check with the judges on that one.........


ding..ding..ding.. Fender Bead pliers for fixing the bead on the wheel opening of much older fenders. From the catalog.....


http://i5.photobucket.com/albums/y16...beadpliers.jpg


Text for the BF-81 ad:

Every body worker should have this Forming Plier for perfect edging of damaged fenders. Fenders are made from heavy gauge steel and the fender edging or bead is not readily reshaped. This tool combines the principle of a compound leverage plier and fender dolly. The wedge nose on the lower jaw is used to pull out turned under beads to insert the mated forming jaw. Forming is readily accomplished by gripping the bead firmly in the plier jaws and employing a rotating motion. The flat spot on top of the jaw can be struck with a hammer to assist in the forming operation. The inside of the jaws are undercut to allow ample clearance for the roll of the fender.

Re: Lets Play Whatz It? !!
 

OK guys, usually I challenge with things that I have already
ID'd but this has me stumped. I have added a pic of the
brand to help (BINGO). Tool is about 12" from the top to bottom,
not including the screw's handle..

Not sure if the one chain is meant to go down around the other
and note the "leaf springs" on the mobile cross bar.

.