Re: Finally starting my Longhorn 4x4 conversion
 

Nothing else get a non intercooled VE and swap it to p-pump. they have the better pistons to play with any way. A 24v is hard to beat once it's swapped too. :lol:

Re: Finally starting my Longhorn 4x4 conversion
 

Non intercooled 1st gens have a little more valve lift outta their cam also, don't they?

Re: Finally starting my Longhorn 4x4 conversion
 

This is getting interesting! I know more about the big engines that the smaller ones.

Re: Finally starting my Longhorn 4x4 conversion
 

How about rockwell DDs

Re: Finally starting my Longhorn 4x4 conversion
 

Spend a little money on a D60 and a D80 and they will hold 1500HP and be reliable other than ring and pinions in extreme circumstances.
Posted via Mobile Device

Re: Finally starting my Longhorn 4x4 conversion
 

I've heard that before, but the lack of duration and the fact that the 1st gen cams are weaker in the area behind the first fournal and like to break when driving a turned up p-pump. I'd use a later cam when doing the swap.

Re: Finally starting my Longhorn 4x4 conversion
 

Today I took the body guy more paint and picked up my seat. He had a couple other things painted for me. The radiator support, hood latch, and hood guide plate. I guess it is progress. :lol:

http://i181.photobucket.com/albums/x...n/000_0007.jpg
http://i181.photobucket.com/albums/x...n/000_0006.jpg
http://i181.photobucket.com/albums/x...n/000_0008.jpg

My lutch is supposed to be here today, conversion lines next week, and some other misc stuff may trickle in later. I did get the RH door lock installed and it works! Now it is getting time to install door panels. Does anyone else think a layer of plastic or some thing will help eliminate road noise and stuff?

Re: Finally starting my Longhorn 4x4 conversion
 

I was kidding about the DDS his signature says go big and that was the first thaing that came to mind.:lol:

Re: Finally starting my Longhorn 4x4 conversion
 

the only thing plastic will do is keep moisture from getting to the card poard dood panels from the back. some of th guys on the 47-59 board are using a peel and stick roof patch product that would work if you put it on the inside of the outside door skin.It dampens vibration. I will see if i can find the thtead.

Re: Finally starting my Longhorn 4x4 conversion
 

the only thing plastic will do is keep moisture from getting to the card poard door panels from the back. some of th guys on the 47-59 board are using a peel and stick roof patch product that would work if you put it on the inside of the outside door skin.It dampens vibration. I will see if i can find the thread.

Re: Finally starting my Longhorn 4x4 conversion
 

here is a link http://67-72chevytrucks.com/vboard/s...d.php?t=476476

Re: Finally starting my Longhorn 4x4 conversion
 

the tar/bitumen based roofingstuff will stink up a storm when the truck sits in the sun the real dampningmat like brown stuff and dynamat has less smell and is more resistant against heat in general , you could just put clearcoat on the back of the doorcards that should seal them up just fine

Re: Finally starting my Longhorn 4x4 conversion
 

The inside of my doors already has a coating on them. I am more interested in keeping cold air and dust from entering the cab via the doors. I might put some insulation in there I have around. I'll post pics if I do it.

Re: Finally starting my Longhorn 4x4 conversion
 

I forgot to add my new to me clutch showed up yesterday. We carried in my steel bed floor and my buddy Mathew cut it to get ready to extend it so we can get the bed assembly started. Pics later.

Re: Finally starting my Longhorn 4x4 conversion
 

Not true, there are guys that have used it for years with no problems. here is one http://67-72chevytrucks.com/vboard/s...=476476&page=2

Re: Finally starting my Longhorn 4x4 conversion
 

Maybe body putty. it stays soft and seals good.The stuff that is it comes in a box about a foot long and has sevral layers of cords about A1/4' in diameter. some car companys used it between the dood and a plastic sheet.

Re: Finally starting my Longhorn 4x4 conversion
 

Man I had not checked in in a while, Truck is looking great.

before too long you should be driving it. It is going to be a one of a kind for sure.

Sadly looking like it will be probably a year and a half before I get to get my 72 cummins project going again.

Re: Finally starting my Longhorn 4x4 conversion
 

Ahhh, I hadn't heard of them breaking.

Have you tried any of the Hamilton cams? The street one seemed appealing to me for having a rowdy DD and be able to pull the world.

Re: Finally starting my Longhorn 4x4 conversion
 

how are you doing? i was rereadind your bild thread and wondering if you were ok.

Re: Finally starting my Longhorn 4x4 conversion
 

Thanks, that stinks you won't be able to work on yours for a while. I know how that goes. This truck has been off and on for a few years. Hopefully I can get it wrapped up before June. :waah:

Re: Finally starting my Longhorn 4x4 conversion
 

Yep. Been using Zach's cams for a while. I have his 181/210 in my Vette, we have several 181/210's running in street trucks, we also have some 200/220's going too. We also are a dealer for Colt Cams as well. The prices on Hamilton's cams are really scaring people though.

Re: Finally starting my Longhorn 4x4 conversion
 

I know what you're talking about. They always used to use like a black butle type of stuff to hold on a sheet of plastic. I haven't decided what I'll be doing yet. I didn't mess with it at all yesterday. Working on a worn out poor dodge right now. :lol:

Re: Finally starting my Longhorn 4x4 conversion
 

Here are pics of the bed work beginning.

http://i181.photobucket.com/albums/x...IMG_0343-1.jpg
http://i181.photobucket.com/albums/x...IMG_0341-1.jpg
http://i181.photobucket.com/albums/x...IMG_0342-1.jpg
http://i181.photobucket.com/albums/x...IMG_0344-1.jpg

We also found out that apparently the bed mounting holes aren't the same on this frame. So that makes me think that the Longhorn bed mounting holes are spaced differently than the standard 8' beds. I always assumed the rear half would be the same. I was wrong. :lol:

Re: Finally starting my Longhorn 4x4 conversion
 

Steel bed longhorn cool.

Re: Finally starting my Longhorn 4x4 conversion
 

And I thought I was the only one that ran into stuff like that:lol: