The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Squarebody Projects and Builds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=139)
-   -   3r!c84 build (https://67-72chevytrucks.com/vboard/showthread.php?t=414772)

cyclefreak207 06-27-2013 12:15 PM

Re: 3r!c84 build
 
Quote:

Originally Posted by 3r!c84 (Post 6145131)
I'm a kawi Guy for life. Was info dirtbikes when I was young. Always kawi . This is a 2007 zx6r they got rid of the 636 engine in 06 and this has the 600cc still out powers all the other makers in the 600 class. Love this thing!
Posted via Mobile Device

Love the 636's, I prefer the 03-04 to the 05-06 just because of that bubble tail... I feel like it pushes my feet too far doing seat standers. I forgot what that "power" feels like though, I'm up +13 teeth on my back sprocket, so I top out somewhere around 130 now :/

cyclefreak207 06-27-2013 12:26 PM

Re: 3r!c84 build
 
I just wish they would have made the frame stronger :/ Everyone I know, including myself has cracked a frame at the ear where the motor mount is. And I recently scraped 12 on the street the other day (I usually never scrape on the street, too far past balance point for my comfort) and I cracked my subframe, one of the 4 mounting points where it bolts to upper end of the frame.

3r!c84 06-27-2013 03:29 PM

Re: 3r!c84 build
 
Ouch! That's badass stunts. I'm not about that really lol a few power wheelies here and there . But I was thinking of doing the -1/+2 sprocket change. Or should I go more ?
Posted via Mobile Device

cyclefreak207 06-27-2013 04:48 PM

Re: 3r!c84 build
 
Quote:

Originally Posted by 3r!c84 (Post 6145393)
Ouch! That's badass stunts. I'm not about that really lol a few power wheelies here and there . But I was thinking of doing the -1/+2 sprocket change. Or should I go more ?
Posted via Mobile Device

some people swear by the -1 in the front since it's like 3+ in the back, but I don't like how tight the chain turns going down 1 in the front... I just wouldn't feel comfortable with the angle that it has to make, I went from a 40 to a 50, and it was good as a highway sprocket, I could still clutch up in 3rd gear (bike hasn't been running right in a while though) went to a 53, and rebuilt my motor, and I could clutch up sitdowns in 4th at like 60 mph. before my crank sensor failed and threw me over the bars on I20 east lol.

For just street riding you'll gain a little acceleration going up like 3 in the back. you'll probably have to add 2 links, and slide your wheel in a little.

3r!c84 06-27-2013 05:39 PM

Re: 3r!c84 build
 
Quote:

Originally Posted by cyclefreak207 (Post 6145510)
some people swear by the -1 in the front since it's like 3+ in the back, but I don't like how tight the chain turns going down 1 in the front... I just wouldn't feel comfortable with the angle that it has to make, I went from a 40 to a 50, and it was good as a highway sprocket, I could still clutch up in 3rd gear (bike hasn't been running right in a while though) went to a 53, and rebuilt my motor, and I could clutch up sitdowns in 4th at like 60 mph. before my crank sensor failed and threw me over the bars on I20 east lol.

For just street riding you'll gain a little acceleration going up like 3 in the back. you'll probably have to add 2 links, and slide your wheel in a little.

I did bmx for the longest and would change to 25/9 tooth talk about chain bending lol but a lot less power going to it... I just want a little more acceleration and still keep my highway driving ability.
Posted via Mobile Device

cyclefreak207 06-28-2013 12:28 PM

Re: 3r!c84 build
 
Quote:

Originally Posted by 3r!c84 (Post 6145595)
I did bmx for the longest and would change to 25/9 tooth talk about chain bending lol but a lot less power going to it... I just want a little more acceleration and still keep my highway driving ability.
Posted via Mobile Device

HAHAHA, I ran the same gearing on my FBM! Howler frame, Demolition bars, Eastern niner hubs/rims, profile cranks.

I would say just go up 3 in the back to get little extra UMPH for acceleration. Hopefully I'll be getting my sensors and have the stunt piece back for some street murder this week :p

chevybuilder18 06-28-2013 05:29 PM

Re: 3r!c84 build
 
Quote:

Originally Posted by 3r!c84 (Post 6144143)
i havent drove the truck in at least 2 months. just gets put to the side for car shows and such. but its a blast to drive and still gets a lot of looks :metal:

gas to expensive for it to be a DD? Just went to EFI with mine, it should get better gas mileage, with a 4L80E it should defitnatley on the highway cause i got 4.11s in the rear, it sucked the gas like 5 mpg hwy! thats when i had a carb on it though. and a th350. To bad your wanting to get rid of your sqaure! :smoke:

3r!c84 06-29-2013 07:43 PM

Re: 3r!c84 build
 
Quote:

Originally Posted by cyclefreak207 (Post 6146828)
HAHAHA, I ran the same gearing on my FBM! Howler frame, Demolition bars, Eastern niner hubs/rims, profile cranks.

I would say just go up 3 in the back to get little extra UMPH for acceleration. Hopefully I'll be getting my sensors and have the stunt piece back for some street murder this week :p

se pk ripper xxl , profile carbon forks, was my racing bmx bike. my other was an eastern frame. profile cromoly forks,and cranks, stolen head set and bars and sproket. still got this one lol it sits

Quote:

Originally Posted by chevybuilder18 (Post 6147265)
gas to expensive for it to be a DD? Just went to EFI with mine, it should get better gas mileage, with a 4L80E it should defitnatley on the highway cause i got 4.11s in the rear, it sucked the gas like 5 mpg hwy! thats when i had a carb on it though. and a th350. To bad your wanting to get rid of your sqaure! :smoke:

ive got my daily saturn i drive (could post a pic of it) just busy with work and school to drive the truck. would kill me in gas being school is 60miles in each direction . and not rushing to get rid of the truck. took my cl ad down going to hold off. got some cool offers but not really what i was looking for yet. time will tell :metal:

Claytona08 06-29-2013 11:11 PM

Re: 3r!c84 build
 
Hey man looked through your thread and your truck is awesome!
Posted via Mobile Device

chevybuilder18 06-30-2013 07:35 PM

Re: 3r!c84 build
 
Quote:

Originally Posted by 3r!c84 (Post 6148912)
se pk ripper xxl , profile carbon forks, was my racing bmx bike. my other was an eastern frame. profile cromoly forks,and cranks, stolen head set and bars and sproket. still got this one lol it sits

Easterns are pretty expensive Bmxs, 500 dollar bike... also the mini sprockets on those were pretty wicked looking


Quote:

Originally Posted by 3r!c84 (Post 6148912)
ive got my daily saturn i drive (could post a pic of it) just busy with work and school to drive the truck. would kill me in gas being school is 60miles in each direction . and not rushing to get rid of the truck. took my cl ad down going to hold off. got some cool offers but not really what i was looking for yet. time will tell :metal:

whoa! i guess your gonna hang on a little longer

3r!c84 06-30-2013 11:18 PM

Re: 3r!c84 build
 
as promised . here is my dailey. 2000 saturn sl1 5speed. put about 140 miles a day. from work to school then come.

http://i995.photobucket.com/albums/a...ps89f6dda5.jpg

http://i995.photobucket.com/albums/a...ps4abe597d.jpg

http://i995.photobucket.com/albums/a...ps4c2143fc.jpg

chevybuilder18 07-01-2013 11:28 PM

Re: 3r!c84 build
 
Quote:

Originally Posted by 3r!c84 (Post 6150805)
as promised . here is my dailey. 2000 saturn sl1 5speed. put about 140 miles a day. from work to school then come.

http://i995.photobucket.com/albums/a...ps89f6dda5.jpg

http://i995.photobucket.com/albums/a...ps4abe597d.jpg

http://i995.photobucket.com/albums/a...ps4c2143fc.jpg

not bad at all. and to top it off, its still a GM product.. I like the rims, and paint, it takes it away from the bulky looking grocery getter sterio typical looking saturns ive seen... it looks wicked

3r!c84 07-02-2013 12:45 PM

Re: 3r!c84 build
 
Quote:

Originally Posted by chevybuilder18 (Post 6152749)
not bad at all. and to top it off, its still a GM product.. I like the rims, and paint, it takes it away from the bulky looking grocery getter sterio typical looking saturns ive seen... it looks wicked

Thankyou! And never seen a lowered Saturn before. They don't make any lowering parts. So its all on Honda civic coilovers Hand made to fit. its like a gokart and gets 40mpg so ill keep it around lol
Posted via Mobile Device

chevybuilder18 07-02-2013 03:23 PM

Re: 3r!c84 build
 
Quote:

Originally Posted by 3r!c84 (Post 6153485)
Thankyou! And never seen a lowered Saturn before. They don't make any lowering parts. So its all on Honda civic coilovers Hand made to fit. its like a gokart and gets 40mpg so ill keep it around lol
Posted via Mobile Device

well honda makes good motorcycles, which i love there motorcycles more than a BMW one, but its just plain embarrising to try and make a small compact honda a race car... no offence to any that own one if your concerned of fuel economy then your obviously to shy to go to the pump with that little bitty honda.. me, 18 to now has never hesitated to break the change jar just to cruise across town, in my 1989 lincoln town car that weighed 5500 pounds alone, and still managed to do it even if it was on E.. mind you it had steelie cragars all the way around and a 302 with 3.40s in the back.. its smart, and simple to have change for gas especially these days. in this case work school and home for is just crazy man! id get some jet lag traveling 160 miles. couldnt imagine that every day. hope she holds up to those. forgot to mention the Lincoln i spoke of had straight pipes aimed directly out the sides :lol: sounded wicked


All times are GMT -4. The time now is 04:32 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com