The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   What did you do to your truck today! (https://67-72chevytrucks.com/vboard/showthread.php?t=401176)

Bennett68C10 07-05-2013 05:28 PM

Re: What did you do to your truck today!
 
Quote:

Originally Posted by Dobster (Post 6158282)
Its an ls1 out of a 2002 corvette. 4L60E, Intro wheels also steering wheel. It has train horns 150 psi compressor powered. It's just a fun truck. Lemons headers, bucket seats from a 2002.

Beautiful truck

dirtyjim 07-05-2013 07:51 PM

Re: What did you do to your truck today!
 
i mounted the power brake booster from a late 80's astro van to the firewall.
also pickedup a factory gm air cleaner at the junk yard so i can get rid of the to small p.o.s. thats on there now. i wish i had all the air cleaners i threw away as a teenager.
http://img.photobucket.com/albums/v3...allbooster.jpg

DUD2STUD 07-05-2013 09:23 PM

Re: What did you do to your truck today!
 
Didn't do any thing to the truck per say but I did pick up an Edelbrock intake and a Holley carb from my brother n law. Then put an electric choke on it. What a pain that was with Holleys photo copied instructions that were so dark I could barley read them
Posted via Mobile Device

Don Quixote 07-05-2013 09:30 PM

Re: What did you do to your truck today!
 
I was out in the pouring rain trying to track down a windshield leak I had had fixed a month ago. Around here if you want something done right you have to do it yourself. While I was at it and had the cowl off I reattached my antenna. Same guys that "fixed" my windshield broke off the connection. Saw that I really need to replace my rear window seal, may invest in a slider while I am at it. Originally, I had set out to clean up my front brakes and repack my wheel bearings. That's what I get for thinking...

Don Quixote 07-05-2013 09:36 PM

Re: What did you do to your truck today!
 
I almost forgot that I took a lawnmower shutoff cable, cut it in half and tied it to measure with a carrick bend and now I can slide my seat back and forth for the first time in 17 years.

farmall 07-05-2013 10:38 PM

Re: What did you do to your truck today!
 
Installed inner and outer grills, light bezels, bumper, and front lens.
Snaggletooth no more.

Next is new rubber floor, arm rests, dash pad, peddle pads, crank doughnuts, dome light, and seat cover. The visors are perfect.

blazercrazy70 07-05-2013 11:38 PM

Re: What did you do to your truck today!
 
Replaced some rotted gas lines and started putting on my new chrome bumper and started rubbing out the old paint. What a difference with a bit of elbow grease can make on the old faded paint.

junkyard 07-06-2013 01:13 AM

Re: What did you do to your truck today!
 
Bought 2 more. Because I'm insane.

bignbad 07-06-2013 09:28 PM

Re: What did you do to your truck today!
 
4 Attachment(s)
I kinda made a key out of site out of mind blend in with the rest of the knobs p.s there a hidden kill switch you need to turn on before you turn then knob/key... all but looks like it belongs there push button would be cool maybe in the future the key knob will be push button

Towstrap 07-06-2013 10:10 PM

Re: What did you do to your truck today!
 
thats coooool

Jases stepside 07-06-2013 10:56 PM

Re: What did you do to your truck today!
 
1 Attachment(s)
Restored my dash, welded up and smoothed out someone's old cb mount lol
Posted via Mobile Device

dnd1978 07-06-2013 11:27 PM

Re: What did you do to your truck today!
 
1 Attachment(s)
Stared running fuel lines. A 1/2 line with a 3/8 return with All stainless. I'm waiting on a couple fittings to fining the job.
Posted via Mobile Device

dnd1978 07-06-2013 11:28 PM

Re: What did you do to your truck today!
 
1 Attachment(s)
More
Posted via Mobile Device

PAWS 72 07-07-2013 01:30 AM

Re: What did you do to your truck today!
 
Took mother in law for a little ride in HER truck tonight.She asked my wife what I had planned for the nite,the cruise inn or what, and she wanted to go riding for a little while tonite.

Couldnt tell her no.She has been the banker on the truck.

Her and the father in law used to ride around on Sat. afternoons in the truck and I guess she had him on her mine tonite.Father in law passed away suddenly back in Feb.2000.He was planning on retiring in Oct. of 2000.He was going to do a complete frame off but we didnt make it.


Sorry for being long winded.

PAWS 72 07-07-2013 01:33 AM

Re: What did you do to your truck today!
 
Quote:

Originally Posted by bignbad (Post 6160072)
I kinda made a key out of site out of mind blend in with the rest of the knobs p.s there a hidden kill switch you need to turn on before you turn then knob/key... all but looks like it belongs there push button would be cool maybe in the future the key knob will be push button

I like that. Neat idea.

ekgguy 07-07-2013 12:32 PM

Re: What did you do to your truck today!
 
I have been looking all over the Houston and surrounding areas for a new bed. The one that I have as can bee seen in previous pictures was a little crumpled and the floor looked like swiss cheese.

We took a little vacation to Stratford, OK last week and on the OK City craigslist up there, found this:

http://i544.photobucket.com/albums/h...705_110414.jpg

http://i544.photobucket.com/albums/h...705_110451.jpg

http://i544.photobucket.com/albums/h...705_144217.jpg

Guy up there had bought it for his project and then wrecked the truck before getting to use it.

Best part...... $100

Problem..... getting it back to Texas. I guess that is a good problem.

ole dollor 07-07-2013 12:48 PM

Re: What did you do to your truck today!
 
Quote:

Originally Posted by bignbad (Post 6160072)
I kinda made a key out of site out of mind blend in with the rest of the knobs p.s there a hidden kill switch you need to turn on before you turn then knob/key... all but looks like it belongs there push button would be cool maybe in the future the key knob will be push button

i like it to , looks great.

vegadesign 07-07-2013 02:29 PM

Re: What did you do to your truck today!
 
Someone stole my dealership license plate frame from1948.
Posted via Mobile Device

ole dollor 07-07-2013 06:08 PM

Re: What did you do to your truck today!
 
Quote:

Originally Posted by vegadesign (Post 6160959)
Someone stole my dealership license plate frame from1948.
Posted via Mobile Device

man that sucks....hope you find it on the thief's car, and get it back

sboris 07-07-2013 08:56 PM

Re: What did you do to your truck today!
 
Quote:

Originally Posted by bignbad (Post 6160072)
I kinda made a key out of site out of mind blend in with the rest of the knobs p.s there a hidden kill switch you need to turn on before you turn then knob/key... all but looks like it belongs there push button would be cool maybe in the future the key knob will be push button

Man that's cool.. I don't think I've seen that one
Posted via Mobile Device

sboris 07-07-2013 09:13 PM

Re: What did you do to your truck today!
 
..

sboris 07-07-2013 09:14 PM

Re: What did you do to your truck today!
 
Got the body panels hung and aligned. All but the hood. I need a buddy for that one..
Just experienced what all the fuss is about on new after mark parts! New front fenders and the pass side stuck out at the bottom 3/8" by the rocker. "Can't shim that". Even put the old fender back just check, and fit like a glove. Oh well that's all done now.
Couple flaws yet to touch up, hopefully headed to paint in August... :):):)
Posted via Mobile Devicehttp://i1150.photobucket.com/albums/...d3b4c8bd3d.jpg
Posted via Mobile Device

ole dollor 07-07-2013 09:28 PM

Re: What did you do to your truck today!
 
Quote:

Originally Posted by sboris (Post 6161615)
Got the body panels hung and aligned. All but the hood. I need a buddy for that one..
Just experienced what all the fuss is about on new after mark parts! New front fenders and the pass side stuck out at the bottom 3/8" by the rocker. "Can't shim that". Even put the old fender back just check, and fit like a glove. Oh well that's all done now.
Couple flaws yet to touch up, hopefully headed to paint in August... :):):)
Posted via Mobile Devicehttp://i1150.photobucket.com/albums/...d3b4c8bd3d.jpg
Posted via Mobile Device

looking good....good work.

Expat_dude 07-07-2013 09:42 PM

Re: What did you do to your truck today!
 
Back glass in

http://i168.photobucket.com/albums/u...psc97191e2.jpg
Posted via Mobile Device

mud.man.rj 07-07-2013 09:48 PM

Re: What did you do to your truck today!
 
ya it is looking good isn't it. I like a good 4x4 up here were I live, kind of need one and handy all year round.:c2:


All times are GMT -4. The time now is 11:42 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com